Filter Kategori Produk
Filter Kategori Perusahaan
Menara

"MONUMEN MENARA"

Bebarapa Fungsi dari Tower / Menara antara lain :

  1. Sebagai simbol  / wujud daerah tersebut
  2. Sebagai salah satu tempat pariwisata
  3. Sebagai Monumen untuk mengenang suatu peristiwa yang pernah terjadi di tempat / daerah tersebut

Menara Transmisi

TOWER TRANSMISI UDARA TEGANGAN TINGGI (SUTET) 150 SAMPAI 500KV

SPECIFICATION :

  1. Angle Section SS400, SS540 (JIS 3101)
  2. Plate SS400, SS540 (JIS 3101)
  3. Bolt, Nuts  & Washer H.4.6, Grade 8.8 (JIS B1181)
  4. Hot Dip Galvanize ISO 1461 (International Standard)

Jembatan Jalur Pipa (Pipe line Bridges)
Hot-Dip Galvanizing

Dimensions of the Zinc Bath
14.5 x 1.8 x 2.6

Production Capacity
450  ton

 


Lattice Tower

TOWER SUBSTATION (TOWER GANTRY)

SPECIFICATION :

  • Angle Section SS400 / SS540 (JIS 3101)
  • Plate SS400 / SS540 (JIS 3101)
  • Bolt, Nuts & Washer H.4.6 Grade 8.8 (JIS B1181)
  • Hot Dip Galvanize Standard International ISO 1461or ASTM A 123-00 (American Standard)

Menara Telekomunikasi

A. STANDARD TOWER SATELINDO :

     Medium Type ;

  • Green Field Site : Tower 30, 45, 55 Meter
  • Roof  Top Site : Tower 15, 20, 25 Meter

B. STANDARD TOWER TELKOMSEL :

  •  Tower 70, 80, 90, 100 Meter

C. STANDARD TOWER KAKI TIGA (THREE LEGGED BTS)  :

  •    Tower 55, 65, 70 Meter

Substation Gantries

SPECIFICATION :

  • Angle Section SS400 (JIS 3101)
  • Anchor Bolt SR 24 (JIS 3112)
  • Plate SS400 (JIS 3101)
  • Round Bar SR24 (JIS 3112)
  • Pipe ASTM A-252 GR.2 (Free Standing Coloum) 
  • Pipe STK 400 (JIS 3445) / Medium 
  • Bolt, Nuts GR. 8.8 (JIS B1181)
  • Welding Electrode Grade E6013 Or E7018 (AWS D1.1)
  • Galvanize ISO 1461 (International Standard)

Jembatan Plat Girder (Plate Girders Bridges)

- Standard Girder Bridging is Between 10 to 40m span with bolt connection

ADVANTAGE  :

  • Unit Weight / Component 2 ton
  • Variant In Span is many
  • Pre-chambered in Fabrication

ERECTION  :

  • Launching Method
  • Crane

Jembatan Kerangka (Truss Bridge)

Standard Truss Bridging is Between 40 to 60m Span with bolt conection

Advantage :

  • Unit Weight /Component 2 ton for 9,4 m
  • Variant in span is many
  • Pre - chambered in Fabrication

ERECTION  :

  • Cantilever Method
  • Scaffolding Method
  • Semi Cantilever Method

Jembatan Semi Permanen

Semi  Permanent Bridging Is Between 40 to 60m Span with Bolt Connection 

ADVANTAGE  :

  • Unit Weight / Component 2 ton
  • Variant In Span is many
  • Pre-chambered in Fabrication

ERECTION  :

  • Cantilever Method
  • Scaffolding Method
  • Semi Cantilever Method

Jembatan Panel Darurat (Emergency Panel Bridges)

Long Span Truss Bridging is Between 80 to 105m Span with Bolt Connection

ADVANTAGE :

  • Unit Weight / Component 2 Ton for 9,4m
  • Variant in Span is many
  •  Pre- Chambered in Fabrication

ERECTION :

  •  Cantilever Method
  •  Scaffolding Methode (Perancah)
  •  Semi Cantilever Method

Bangunan Industri & Komersial

SPECIFICATION :

  • IWF & H-Beam SS400 (JIS G3101)
  • Angle Section SS400 (JIS G3101)
  • Plate SS400  (JIS G3101)
  • Anchor Bolt SR24 (JIS G3112)
  • Primary Bolt & Nuts H 8.8 ((JIS B1181)
  • Secondary Bolt & Nuts H 4.6 (JIS G1051)
  • Welding Electrode Grade E7018 (AWS D1.1)

Jembatan Lengkung (Arch Bridge)

Jembatan Pelengkung Bentang A.250 Meter

SPECIFICATION :

 

  • Bridge Management System code with Rev-SNI 2005 BM 100
  • Hot Rolled Profile SS400 (JIS G3101)
  • Welded Beam SM490 YA  (JIS G3106)
  • Plate SM490 YA  (JIS G3106)
  • Plate SS400 (JIS G3101)
  • Angle SS400 (JIS G3101)
  • Hot Rolled Profile SS400 (JIS G3101)
  • Anchor Bolt SR24  (JIS G3112)
  • Shear Connector SD40 (JIS G3112)
  • Pipe STK290 (JIS G3444)
  • Spiral Pipe ASTM A252 GR. 2
  • Primary Bolt & Nuts Grade S10.T
  • Secondary Bolt & Nuts Grade S10.T
  • Bridge Deck SPCC
  • Round Bar SR24 (JIS G3112)
  • Deform Bar SD40 (JIS G3112)
  • Pot Bearing
  • Hanger
  • Welding Electrode SMAW Process  AWS D1.1 Grade E7018 or Equivalent
  • Welding Electrode SAW Process  AWS A5.17 Grade F744 EL12
  • Galvanize AS/NZS 4680 : 1999/ ASTM A123/ISO 1461

 

Struktur Baja

SPECIFICATION :

  • IWF & H-Beam SS400 (JIS G3101)
  • Angle Section SS400 (JIS G3101)
  • Plate SS400  (JIS G3101)
  • Bracing SR 24 (JIS G3112)
  • Purlin SPHC ((JIS G3131)
  • Sagrod SR 24 (JIS G3112)
  • Anchor Bolt SR24 (JIS G3112)
  • Primary Bolt & Nuts H 8.8 ((JIS B1181)
  • Secondary Bolt & Nuts H 4.6 (JIS G1051)
  • Welding Electrode Grade E7018 (AWS D1.1)

Peralatan Industri

SPECIFICATION :

  • IWF & H-Beam SS490 (JIS G3106)
  • Angle Section SS400 (JIS G3101)
  • Plate SS490  (JIS G3106)
  • Plate SS400  (JIS G3101)
  • Purlin SPHC ((JIS G3131)
  • Bolt, Nuts & Washer F 10.T ((JIS B1186)
  • Anchor Bolt SR 24(JIS G3112)
  • Welding Electrode Grade E7018 (AWS D1.1)

Perumahan & Rumah Tinggal /Residen
Bahan Bangunan & Komponen Bangunan

SPECIFICATION :

  • IWF & H-Beam SS400 (JIS G3101)
  • Angle Section SS400 (JIS G3101)
  • Plate SS400  (JIS G3101)
  • Bracing SR24  (JIS G3112)
  • Purlin SPHC (JIS G3131)
  • Sagrod SR 24 (JIS G3112)
  • Secondary Bolt & Nuts H4.6 (JIS B1051)
  • Welding Electrode Grade E7018 (AWS D 1.1)

Jembatan

  • Welde Beam (Gelagar),  Standar JIS G3106 SM490YA
  • Roundbar,  Standar JIS G3112 SR 24 atau
  • Deformbar, Standar JIS G3112 SD 40
  • Bridge Deck, Standard SPCC
  • Angle, Standar G3101 SS400
  • Anchor Bolt, Standard JIS G3112 SR 24
  • Bolt and Nuts (Galvanized)
  • Galvanized

Jembatan Panel Darurat (Emergency Panel Bridges)