Filter Kategori Produk
Filter Kategori Perusahaan
Cat Acrylic (Acrylic Paint)

Keunggulan:

  1. Mudah diaplikasikan
  2. Satu Komponen
  3. Daya tahan yg baik terhadap bahan kimia dan air
  4. Semi Glossy
  5. Diaplikasikan Untuk outdoor atau indoor

Cat Acrylic (Acrylic Paint)

Keunggulan:

  1. Mudah diaplikasikan
  2. Satu Komponen
  3. Daya tahan yg baik terhadap bahan kimia dan air
  4. Semi Glossy
  5. Diaplikasikan Untuk outdoor atau indoor

Cat Acrylic (Acrylic Paint)

Keunggulan:

  1. Mudah diaplikasikan
  2. Satu Komponen
  3. Daya tahan yg baik terhadap bahan kimia dan air
  4. Semi Glossy
  5. Diaplikasikan Untuk outdoor atau indoor

cat Epoxy (Epoxy Paints)

Keunggulan:

  1. Mudah diaplikasikan
  2. Satu Komponen
  3. Daya tahan yg baik terhadap cuaca
  4. Glossy
  5. Diaplikasikan untuk outdoor atau indoor

Alkyd - Intermediate Coat Paint

Keunggulan:

  1. Mudah diaplikasikan
  2. Satu Komponen
  3. Daya tahan yg baik terhadap cuaca
  4. Glossy
  5. Diaplikasikan untuk outdoor atau indoor

Alkyd - Intermediate Coat Paint

Keunggulan:

  1. Mudah diaplikasikan
  2. Satu Komponen
  3. Daya tahan yg baik terhadap cuaca
  4. Glossy
  5. Diaplikasikan Untuk outdoor atau indoor

Alkyd - Intermediate Coat Paint

Keunggulan:

  1. Mudah diaplikasikan
  2. Satu Komponen
  3. Daya tahan yg baik terhadap cuaca
  4. Glossy
  5. Diaplikasikan Untuk outdoor atau indoor

Alkyd - Intermediate Coat Paint

Keunggulan:

  1. Mudah diaplikasikan
  2. Satu Komponen
  3. Daya tahan yg baik terhadap cuaca
  4. Glossy
  5. Diaplikasikan Untuk outdoor atau indoor

Alkyd - Primer Coat Paint

Keunggulan:

  1. Mudah diaplikasikan
  2. Satu Komponen
  3. Daya tahan yg baik terhadap cuaca
  4. Glossy
  5. Diaplikasikan untuk outdoor atau indoor

cat Epoxy (Epoxy Paints)

Keunggulan:

  1. Mudah diaplikasikan
  2. Satu Komponen
  3. Daya tahan yg baik terhadap cuaca
  4. Glossy
  5. Diaplikasikan untuk outdoor atau indoor

cat Epoxy (Epoxy Paints)

This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product. Specialy designed for areas where optimum surface preparation is not posible or desired. Provides long lasting protection in environments with high corosivity. Can be used as primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised stel, stainles stel, aluminium and a range of aged coating surfaces. It can be applied at sub zero surface temperatures.

cat Epoxy (Epoxy Paints)

Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product with luminous pigments to aid application and inspection. Specialy designed for areas where optimum surface preparation is not posible or desired. Provides long lasting protection in environments with high corosivity. Can be used as primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon stel, galvanised steel, stainles stel, aluminium and a range of aged coating surfaces. It can be applied at sub zero surface temperatures. Approvals and certificates Approved for PSPC for Water Balast Tanks acording to IMO Res. MSC 215(82) Colours beige, gren Typical use Specialy designed for maintenance and repair of dedicated water balast tanks on vesels and ofshore structures. Can be inspected with specific UV lamps in order to ease inspection and holiday detection. Additional certificates and approvals

cat Epoxy (Epoxy Paints)

Product type: Anticorrosive coating Area of use: Helidecks, walkways, ramps, weigh bridge decks, drill decks, escape routes, decks in general where abrasion resistance and non-slip properties are required. It can be applied at sub zero surface temperatures. Substrate: Approved primers, carbon steel and concrete Spray application – no trowelling High build – one coat system Non-slip surfcae

Cat Sintetis Resin (Synthetic Resin Paints)

Product type: Anticorrosive coating Area of use: Newbuilding: exterior and interior areas, including outside hull, superstructure, decks, cargo holds, water ballast tanks Substrate: Steel, carbon steel, galvanised steel, shop primed steel, stainless steel, aluminium and concrete substrates Full universality IMO PSPC for WBT/COT approved Lower VOC Fast drying Low temperature applicable

cat Epoxy (Epoxy Paints)

Jotaguard 630 The hard wearing epoxy based cargo hold coating Jotagud 630 is applicable for both newbuilding and maintenance situations. Product type: Anticorrosive coating Area of use: Cargo holds Substrate: Carbon steel, stainless steel, galvanized steel, shop primed steel Time efficient Hard wearing Certificate for carriage of grain Jotaguard 660 The pure epoxy coating provides very good protection for cargo holds subject to mechanical damage and corrosive climate. Product type: Anticorrosive coating Area of use: Cargo holds Substrate: Carbon steel, stainless steel, galvanized steel, shop primed steel Very good mechanical resistance - protects against hard, angular cargoes Very good corrosion resistance FDA compliant and certified for carriage of grain Jotaguard 690 Jotaguard 690 is a high solids polyamine cured pure epoxy based primer coating with excellent mechanical properties. Jotaguard 690 and Jotaguard 690 S as a combination system are designed to provide ultimate protection for cargo holds. Product type: Anticorrosive coating Area of use: Cargo holds Substrate: Carbon steel, stainless steel, galvanized steel, shop primed steel Supreme mechanical strength - withstand abrasion, impact and gouging in tough environments Easy to clean Long-lasting service - reduce the need for maintenance during operation Jotaguard 690 S Jotaguard 690 S is a premium plus coating and recommended as a finish coat to maximize abrasion and scratch resistance. Jotaguard 690 and Jotaguard 690 S as a combination system are designed to provide ultimate protection for cargo holds. Product type: Anticorrosive coating Area of use: Cargo holds Substrate: Carbon steel, stainless steel, galvanized steel, shop primed steel Supreme mechanical strength - withstand abrasion, impact and gouging in tough environments Easy to clean Long-lasting service - reduce the need for maintenance during operation

cat Epoxy (Epoxy Paints)

Jotamastic 80 Jotamastic 80 is a two component epoxy mastic coating for repair and maintenance. Specially designed for areas where optimum surface preparation is not possible or desired, and as a solution for less severe environments. Jotamastic 80 can be used as primer, mid coat and finish coat or as single coat system in atmospheric and immersed environments. Can be applied at sub zero surface temperatures. Product type: Anticorrosive coating Area of use: Marine: outside hull, exterior and interior areas Protective: recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel Substrate: Carbon steel, galvanized steel, stainless steel, aluminum, concrete and a range of aged coating surfaces Surface tolerant for maintenance and repair Low film thickness version providing relevant protection at reduced cost in less severe environments User friendly Jotamastic 87 Jotamastic 87 is a two component epoxy mastic coating for repair and maintenance. The product is surface tolerant, high solids, high build product. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity. Jotamastic 87 can be used as primer, mid coat and finish coat or as single coat system in atmospheric and immersed environments. It can be applied at sub zero surface temperatures. Product type: Anticorrosive coating Area of use: Marine: outside hull, exterior and interior areas, including water ballast tanks, approved for PSPC for water ballast tanks according to IMO Res. MSC 82/W. Protective: recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel Substrate: Carbon steel, galvanized steel, stainless steel, aluminum, concrete and a range of aged coating surfaces Surface tolerant for maintenance and repair More than 25 years track record For severe environments requiring long liftetime expectancy Jotamastic 90 Jotamastic 90 is a two component epoxy mastic coating for repair and maintenance. The product is surface tolerant, high solids, high build and tintable in a wide range of colours in Jotun's Multicolour Industry (MCI) system. Jotamastic 90 is also optimized for short overcoating intervals, improving productivity for the customer. Provides long lasting protection in environments with high corrosivity. Product type: Anticorrosive coating Area of use: Marine: outside hull, exterior and interior areas Protective: recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel Substrate: Carbon steel, galvanised steel, stainless steel, aluminium, concrete and a range of aged coating surfaces Tintable, offering increased colour flexibility Short overcoating intervals, improving productivity Robust and user friendly, offering safe application Surface tolerant for maintenance and repair

cat Epoxy (Epoxy Paints)

Jotaprime 500 Jotaprime 500 is an all-year newbuilding and repair coating that can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Product type: Anticorrosive coating Area of use: Exterior and interior areas, including outside hull, superstructures, decks and cargo holds Substrate: Carbon steel, steel Abrasion resistant Fast drying, fast handling Low temperature applicable

cat Epoxy (Epoxy Paints)

Marathon Marathon is a high build, highly abrasion and impact resistant two component coating reinforced with glass flakes. Marathon is especially suited for highly corrosive environments that require a strong coating that will endure the test of time. Marathon has a long track record of success on a range of application areas. It is also a non-skid coating when used with appropriate aggregate.

Fouling Release paint

Paint Cat antifouling paint paint coating epoxy Antifouling marine

Self polishing Antifouling Paint

SeaMate M SeaMate M is a new and improved SeaMate especially designed for maintenance and repair. With a new and patented binder system combined with an optimised biocide package, you can rely on a long term fouling protection as well as excellent hull performance. Explore SeaMate M - the premium self-polishing antifouling suitable for all types of vessels trading worldwide and designed for excellent fouling protection. A reliable fuel saving alternative where long term investment in time and money matters. Product type: Antifouling Area of use: Underwater hull at dry-docking Substrate: Approved primers on aluminum and carbon steel Excellent fouling protection and long term hull performance Long term fuel saving alternative Designed for vessels with up to 90 months service intervals Derived from experience with silyl acrylate technology Optimising return on investment Reduced carbon footprint - VOC compliant

Fouling Release paint

Paint Cat paint coating Protective marine Antifouling paint

Fouling Control Paint

SeaQuantum Classic S SeaQuantum Classic S is the ultimate fuel saver for medium activity vessels like tankers and bulkers. This self-polishing, low friction antifouling is based on 3rd generation silyl acrylate technology. SeaQuantum is globally identified as the leading silyl acrylate antifouling coating and has been applied on close to 8,000 vessels in newbuilding and dry-docking situations. SeaQuantum Plus S SeaQuantum Plus S is the ultimate fuel saver for high activity vessels like containers, LNG and car carriers. This self-polishing, low friction antifouling is based on 3rd generation silyl acrylate technology. SeaQuantum is globally identified as the leading silyl acrylate antifouling coating and has been applied on close to 8,000 vessels in newbuilding and dry-docking situations. SeaQuantum Pro U Experience our SeaQuantum Pro U with unique fuel saving properties identified through analysis and monitoring of hull performance. With the addition of SeaQuantum Pro U to the SeaQuantum range, Jotun is able to provide the very best in proven performance during outfitting as well as over the operating period. SeaQuantum is globally recognised as the leading silyl acrylate antifouling and has been applied on more than 7,000 vessels in newbuilding and dry-docking situations. SeaQuantum Static SeaQuantum Static is the ultimate fuel saver for low activity vessels like offshore vessels with longer idle periods and slow steaming vessels like tankers and bulkers. This self-polishing, low friction antifouling is based on 3rd generation silyl acrylate technology. SeaQuantum is globally identified as the leading silyl acrylate antifouling coating and has been applied on close to 8,000 vessels in newbuilding and dry-docking situations. SeaQuantum Ultra S SeaQuantum Ultra S is the ultimate fuel saver for low activity vessels like offshore vessels and slow steaming vessels like tankers and bulkers. This self-polishing, low friction antifouling is based on 3rd generation silyl acrylate technology. SeaQuantum is globally identified as the leading silyl acrylate antifouling coating and has been applied on close to 8,000 vessels in newbuilding and dry-docking situations. SeaQuantum X200 SeaQuantum X200 is the latest development in tin-free, high performance, ultra low friction self-polishing antifouling, based on the latest development in hydrolysing silylmethacrylate copolymers. By combining outstanding lifetime performance with excellent application properties and state-of-the-art technical service, SeaQuantum X200 and our Hull Performance Solutions (HPS) is one of the most attractive investments on the market today.

cat Epoxy (Epoxy Paints)

Tankguard DW Tankguard DW is a solvent free epoxy designed for use in tanks for drinking water. It contains no solvents or flexibilisers – such as benzyl alcohol. Tankguard DW passes the strictest requirements for potable water – like BS 6920. In addition, it is easy to apply with standard airless spray equipment with reasonable lengths of hoses. Product type: Tank coating Area of use: Specially designed for drinking water tanks, can also be used in cases where it is of major importance that nothing will leak out from the paint and contaminate cargo Substrate: Suitable for properly prepared carbon steel, stainless steel and concrete substrates Potable water/drinking water approvals – BS 6920 Easy to apply with airless spray Smooth surface Marine Tank Coatings