Direktori Produk

Filter Pencarian

Negara

Indonesia (500)

Semua Negara (500)

Kategori Keanggotaan

Platinum (117)

Toko (344)

Free (17)

Semua Kategori Member (478)

Kategori Perusahaan

Manufacturer (126)

Distributor (6)

Paint Applicator (13)

Steel Stores (1)

Building Stores (354)

Semua Kategori (500)


Reset pencarian

Produk terkait

  • JOTUN - JOTAMASTIC, 80, 87,90, SF

    Harga :

    Minimal Order :

    Jotamastic 80 Jotamastic 80 is a two component epoxy mastic coating for repair and maintenance. Specially designed for areas where optimum surface preparation is not possible or desired, and as a solution for less severe environments. Jotamastic 80 can be used as primer, mid coat and finish coat or as single coat system in atmospheric and immersed environments. Can be applied at sub zero surface temperatures. Product type: Anticorrosive coating Area of use: Marine: outside hull, exterior and interior areas Protective: recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel Substrate: Carbon steel, galvanized steel, stainless steel, aluminum, concrete and a range of aged coating surfaces Surface tolerant for maintenance and repair Low film thickness version providing relevant protection at reduced cost in less severe environments User friendly Jotamastic 87 Jotamastic 87 is a two component epoxy mastic coating for repair and maintenance. The product is surface tolerant, high solids, high build product. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity. Jotamastic 87 can be used as primer, mid coat and finish coat or as single coat system in atmospheric and immersed environments. It can be applied at sub zero surface temperatures. Product type: Anticorrosive coating Area of use: Marine: outside hull, exterior and interior areas, including water ballast tanks, approved for PSPC for water ballast tanks according to IMO Res. MSC 82/W. Protective: recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel Substrate: Carbon steel, galvanized steel, stainless steel, aluminum, concrete and a range of aged coating surfaces Surface tolerant for maintenance and repair More than 25 years track record For severe environments requiring long liftetime expectancy Jotamastic 90 Jotamastic 90 is a two component epoxy mastic coating for repair and maintenance. The product is surface tolerant, high solids, high build and tintable in a wide range of colours in Jotun's Multicolour Industry (MCI) system. Jotamastic 90 is also optimized for short overcoating intervals, improving productivity for the customer. Provides long lasting protection in environments with high corrosivity. Product type: Anticorrosive coating Area of use: Marine: outside hull, exterior and interior areas Protective: recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel Substrate: Carbon steel, galvanised steel, stainless steel, aluminium, concrete and a range of aged coating surfaces Tintable, offering increased colour flexibility Short overcoating intervals, improving productivity Robust and user friendly, offering safe application Surface tolerant for maintenance and repair
    • Kawasan Industri MM2100, Jalan Irian III Blok KK1 Kota Bekasi
    • +62 21 89982657
    • +62 21 89982658

  • MASCOAT DTI

    Harga :

    Minimal Order :

    Mascoat Industrial-DTI is designed to be a multiple purpose coating that solves insulating and Corrosion Under Insulation issues. This thermal insulation coating product fulfills niche market areas of temperatures under 375°F on all types of substrates. Mascoat Industrial-DTI thermal insulating coating works not only to reduce temperatures, but also provides energy savings, thermal insulation and personnel protection all in an easy spray-on application. Since the product is applied in 20 mil (0.50 mm) coats directly to the substrate or primer, it provides excellent corrosion protection as well.   Mascoat Industrial-DTI thermal insulating coating employs only the best materials and has been specifically engineered in our own formulation lab for thermal insulating performance and long lasting durability. Our coatings are capable of sustained working loads of 375°F (190ËšC).  Mascoat Industrial-DTI can be applied directly on top of a primed surface in 20 mils (0.5 mm) coats to areas that are prone to CUI. By applying the coating, an insulating quality is achieved as well added substrate protection. This coating can be built up to higher dry film thicknesses bringing temperatures well within personnel protection needs. Mascoat’s coatings are all water-based, non-combustible, and have no toxic concerns.   Mascoat Industrial-DTI offers insulation qualities in specific applications and due to its low permeability rating; it minimizes the permeation of moisture and chemicals to the surface of the steel.  Using this product alone does not eliminate the need to use a high performance primer.  Proper surface preparation as well as a proper primer selection will provide extended service life for the steel substrate.    Mascoat coatings enable the specifiers to consider several alternate primers to meet the specific project requirements. It can also be top-coated in harsh atmospheres or where chemical exposure warrants a protective finish coating.    
    • Jl Raya Sultan Agung Km 27 Pondok Ungu Kota Bekasi
    • +62 21 8843385
    • +62 21 8840820

  • HEMPEL'S PROBOND 45184

    Harga :

    Minimal Order :

    Description
    HEMPEL'S ProBond 45184 is a two-component low-temperature epoxy "tie coat" coating.
    Area of use
    For use as a "tie coat" between epoxy and antifouling coatings, also as a "sealer" of old antifouling.
    • Jl Raya Sultan Agung Km 27 Pondok Ungu Kota Bekasi
    • +62 21 8843385
    • +62 21 8840820

  • CAT ALKYD (ALKYD PRIMER)

    Harga :

    Minimal Order :

    Keunggulan: Mudah diaplikasikan Satu Komponen Daya tahan yg baik terhadap cuaca Glossy Diaplikasikan untuk outdoor atau indoor
    • Kawasan Industri MM2100, Jalan Irian III Blok KK1 Kota Bekasi
    • +62 21 89982657
    • +62 21 89982658

  • HEMPADUR QUATTRO 17634

    Harga :

    Minimal Order :

    Description
    HEMPADUR QUATTRO 17634 is a two-component universal epoxy paint, which cures to a hard and tough coating with good resistance to abrasion, seawater and various oils. Area of use
    As a universal epoxy and self-primed high performance coating system for atmospheric or in-water service, including water ballast tanks to be coated according to IMO-PSPC requirements (Resolution MSC.215(82)). HEMPADUR QUATTRO 17634 is intended for all year application down to -10°C/15°F and for in-shop applications where fast recoating and handling is required.
    Segments
    Marine, Protective
    • Jl Raya Sultan Agung Km 27 Pondok Ungu Kota Bekasi
    • +62 21 8843385
    • +62 21 8840820

  • CAT WILDAN 800-400 / EPOXY MASTIC - HIGH SOLID

    Harga :

    Minimal Order :

    PRODUCT DESCRIPTION High solid polyamide cured epoxy coating. CHARACTERISTICS Surface tolerant coating for lower grade of steel surface preparation. Excellent corrosion resistance and good flexibility. Resists of high humidity and moisture. High performance self-priming topcoats. Compatible with various aged coatings. Can be applied over most existing coatings. Not recommended to immersion in acids and alkalises.
    • Jl. Raya Pondok Timur No 17 Kab. Bekasi
    • 02182605565
    • 0218266971

  • CAT WILDAN 606-200/MODIFIED INORGANIC ZINC PRIMER

    Harga :

    Minimal Order :

    PRODUCT DESCRIPTION Single – Package, modified inorganic zinc – rich primer with excellent corrosion protection CHARACTERISTICS Dry heat resistance 125°C with peaks up to 160°C. Outstanding for repairing epoxy zinc rich primer and silicate zinc rich primer. Can be used as a reconditioner for aged derusted galvanized steel. One component modified inorganic zinc rich primer
    • Jl. Raya Pondok Timur No 17 Kab. Bekasi
    • 02182605565
    • 0218266971

  • CAT WILDAN 900-500 S / PU FINISH SATIN

    Harga :

    Minimal Order :

    PRODUCT DESCRIPTION A two components acrylic aliphatic polyurethane satin finish coat. CHARACTERISTICS Outstanding weather resistance with excellent colour retention. Resistance to broad range of corrosive atmospheres.  Hard, tough and abrasion resistance Excellent resistance to atmospheric exposure Good resistance to splash and spillage of acids, alkalises, salt solutions and aliphatic petroleum products. Can be recoated even after long atmospheric exposure.
    • Jl. Raya Pondok Timur No 17 Kab. Bekasi
    • 02182605565
    • 0218266971

  • CAT PELAPIS ANTI BOCOR

    Harga :

    Minimal Order :

    No Drop adalah cat pelapis anti bocor yang memiliki sifat elastis, kedap air serta sangat tahan cuaca yang digunakan pada tembok kamar mandi, tembok samping rumah, seng/ asbes, wuwungan, atap, talang atau sambungan, dan atap beton. No Drop juga bisa berfungsi sebagai produk dekoratif karena mempunyai 16 pilihan warna menarik.
    • Jl. Pasar Serang Cibarusah Kab. Bekasi
    • +62 21 8970853
    • +62 21 8970853

  • CAT BESI

    Harga :

    Minimal Order :

    NIPPE 2000 didasarkan pada nitroselulosa lacquer. Cepat kering, gloss baik, memudar tahan, daya tahan dan adhesi yang baik. penggunaan:   NIPPE 2000 adalah cocok untuk aplikasi untuk mobil, mesin, struktur baja dan kayu lainnya dan mebel.
    • Jl. Pasar Serang Cibarusah Kab. Bekasi
    • +62 21 8970853
    • +62 21 8970853