Direktori Produk

Filter Pencarian

Negara

Thailand (1)

Turkey (8)

Germany (9)

Singapore (1)

Spain (3)

Netherlands (2)

Taiwan, Province of China (3)

China (49)

indonesia (1)

South Africa (2)

Australia (7)

United States (2)

United Kingdom (3)

Afghanistan (4)

Italy (38)

(3)

India (3)

Indonesia (18)

Belgium (2)

USA (13)

Korea, Republic of (4)

Semua Negara (176)

Kategori Keanggotaan

Platinum (24)

Free (142)

Semua Kategori Member (166)

Kategori Perusahaan

Producers (152)

Distributors (16)

Suppliers (7)

Fabricators (1)

Semua Kategori (176)


Reset pencarian

Produk terkait

  • CNC PLATE DRILLING

    Harga :

    Minimal Order :

    Hydraulic punching machine of the C-frame type, fitted with a tool having three selectable punches. Each punch has a punching force of kN 800 or 1100 kN throughout its entire stroke. One-piece steel frame containing the electric system with auxiliary pushbutton, the hydraulic system complete with power pack, the pneumatic system and the Ficep Pegaso CNC. The punching machine is supplied ready to work and does not require installation. • Plate clamping system, self-adjustable to suit the plate thickness, used for both stripping during punching, and for repositioning of the pinchers  • When required, the machine can also be fitted with a drilling unit and/or a marking tool • Coordinate table to position the plate in the working area, complete with: - Positioning system on the two axes of the plate holding carriage, complete with ball screws and servo motors  - Plate holding carriage fitted with two pinchers  - Zero plate reference unit - Supporting table with balls to support the workpiece during processing  - Plate clamping pinchers, hydraulically controlled, to clamp both plates MAIN OPTIONS DRILLING UNIT • This unit enables drilling of holes, as an alternative to punching, up to a max. diameter of 40 mm. The unit is automatically inserted into the punching unit’s working cycle and is supplied complete with: • Spindle rotation motor • Sensitive, self-controlled speed change unit for fast approach, work preset speed, fast retract • External and internal oil mist coolant system for drills MARKING TOOL • The marking tool can be used in place of the left-hand punch holder included with the basic machine. In just a few seconds, it is possible to have a simple and quick marking unit!
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123

  • PUNCHING UNIT

    Harga :

    Minimal Order :

    Today the TIPO B system is the most innovative solution for the fabrication of plates for many varied industries.

    TIPO B has been designed with the aim to integrate all the functions which are required in plate fabrication.

    The ability to start with raw material and end with the finished part after completion of all the necessary operations such as drilling, milling, punching, marking, scribing and cutting the part to the desired size and shape is what makes the TIPO B truly unique. The CNC line model TIPO B consists of a closed bridge press frame that includes a punching head, drilling head, tool changer, marking unit, plasma cutting unit and an oxyfuel cutting unit that is capable of processing plates from 6 mm to 100 mm in thickness and up to 2540 mm in width.

    The infeed and outfeed conveyor can be configured with additional sections of conveyor in order to achieve the desired length of plate to be processed starting from the standard length of 6 metres. The plate positioning is accomplished with a lateral material clamping device that positions the material to precise tolerances regardless of any irregularities in the plate edge condition from the rolling process or from the removal of prior piece parts that were generated from the stock plate. A two/three gripper system with a very precise rack and pinion linear device is used to position the plate and measure its actual location. A 1000 kN hydraulic punching head is typically utilized to generate holes in plates up to 25 mm thickness.

    Quick punching is integrated with the thermal cutting for maximum productivity.

    The plate and the punching head move fast transferred to the programmed position through rack and pinion and brushless motors. A high performance machining spindle capable of up to 3000 RPM with a ball screw feed can be furnished to add significant perforating capabilities to the TIPO B.

    A tool-changer with 5 positions can be combined with the drilling head to allow the automatic processing of parts within a nest that requires the production of different operations or hole sizes.

    The robust drill head of the TIPO B has a spindle (19 kW / 25 hp) with an ISO 45 tool holder which is suitable for lateral and frontal milling operations.

    This combination of power and speed takes full advantage of not only high speed steel drills with internal/external lubrication, but also high performance insert tools such as carbide.

    The TIPO B can be equipped with an 80 kN marking unit having a disc with 38 alphanumeric characters. The marking head can quickly generate part identification marks that are deep enough to remain readable, even after painting or galvanizing.

    The system is provided with a Hypertherm 260A torch for processing plates up to 38 mm in thickness. More powerful plasma units are available optionally.

    The plasma torch is utilized to contour a cutting operation of the parts from the nested stock plate.

    During the plasma cutting process, Ficep software monitors the power to the torch and adjusts its height position accordingly to grant the highest cut quality.

    By drilling a starter hole, it is possible to use the plasma to cut up to a thickness of 58 mm and higher with more powerful plasma units.
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123

  • ANGLE SHEARING

    Harga :

    Minimal Order :

    The “SP” lines are exceptional work cells where an angle enters as a stock length and exits as a finished part after programmed combination of processes such as punching, drilling, marking and shearing. The customer can easily configure the line to address their specific needs: Versions with 1, 2 or 3 different punch diameters on each leg of the angle. CNC programmable cartridge style marker. Automatic stock length loading tables Rotary loaders for the automatic transfer of angles from the loading table to the system infeed conveyor
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123

  • SHEARING MACHINE

    Harga :

    Minimal Order :

    The Ficep CNC angle line solution gives you the opportunity to not only process angle but also channels and flats! The extensive Ficep angle line product line offers the following capabilities: Punching Drilling Shearing Notching Marking The A series of the Ficep angle line have been created for small and medium steel construction companies. These machines provide flexibility and simple ease of use. They can be utilised by customers who do not have specialised staff and where production lots are short and diverse. The machines can be configured according to customer requirements. Series A, strength and innovative technology for top level products.
    The punch and shear lines in the A series are characterised by an innovative roller conveyor system for material input. The operator only has to manually feed the angle onto the conveyor rollers, and then the machine automatically conveys and positions the piece according to its size.
    The roller system allows precision with a minimum loss of material therefore reducing cost. The A range comes with various sizes to cover all the most common sizes of angles used in steel construction. The lines of the A series are very flexible and easy to configure according to the customerÂ’s requirements.
    The basic machine can be configured with options of: 1/2/3 diameters per flange. written marks programmed by the CNC supplementary press unit for housing supplementary rapid change tools for notching, marking, or double punch operations. Each diameter is managed by the CNC on an infinite number of surface types. Each punch is housed in a special rapid-change holder
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123

  • CNC PUNCHING UNIT

    Harga :

    Minimal Order :

    The “SP” lines are exceptional work cells where an angle enters as a stock length and exits as a finished part after programmed combination of processes such as punching, drilling, marking and shearing. The customer can easily configure the line to address their specific needs: Versions with 1, 2 or 3 different punch diameters on each leg of the angle. CNC programmable cartridge style marker. Automatic stock length loading tables Rotary loaders for the automatic transfer of angles from the loading table to the system infeed conveyor
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123

  • CNC PUNCHING MACHINE

    Harga :

    Minimal Order :

    The “SP” lines are exceptional work cells where an angle enters as a stock length and exits as a finished part after programmed combination of processes such as punching, drilling, marking and shearing. The customer can easily configure the line to address their specific needs: Versions with 1, 2 or 3 different punch diameters on each leg of the angle. CNC programmable cartridge style marker. Automatic stock length loading tables Rotary loaders for the automatic transfer of angles from the loading table to the system infeed conveyor
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123

  • CNC PUNCHING UNIT

    Harga :

    Minimal Order :

    The Ficep CNC angle line solution gives you the opportunity to not only process angle but also channels and flats! The extensive Ficep angle line product line offers the following capabilities: Punching Drilling Shearing Notching Marking The A series of the Ficep angle line have been created for small and medium steel construction companies. These machines provide flexibility and simple ease of use. They can be utilised by customers who do not have specialised staff and where production lots are short and diverse. The machines can be configured according to customer requirements. Series A, strength and innovative technology for top level products.
    The punch and shear lines in the A series are characterised by an innovative roller conveyor system for material input. The operator only has to manually feed the angle onto the conveyor rollers, and then the machine automatically conveys and positions the piece according to its size.
    The roller system allows precision with a minimum loss of material therefore reducing cost. The A range comes with various sizes to cover all the most common sizes of angles used in steel construction. The lines of the A series are very flexible and easy to configure according to the customerÂ’s requirements.
    The basic machine can be configured with options of: 1/2/3 diameters per flange. written marks programmed by the CNC supplementary press unit for housing supplementary rapid change tools for notching, marking, or double punch operations. Each diameter is managed by the CNC on an infinite number of surface types. Each punch is housed in a special rapid-change holder
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123

  • CNC ANGLE PUNCHING

    Harga :

    Minimal Order :

    The “SP” lines are exceptional work cells where an angle enters as a stock length and exits as a finished part after programmed combination of processes such as punching, drilling, marking and shearing. The customer can easily configure the line to address their specific needs: Versions with 1, 2 or 3 different punch diameters on each leg of the angle. CNC programmable cartridge style marker. Automatic stock length loading tables Rotary loaders for the automatic transfer of angles from the loading table to the system infeed conveyor
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123

  • ANGLE PUNCHING MACHINE: JX HIGH SPEED ANGLE PUNCHING-SHEARING-MARKING MACHINE

    Harga :

    Minimal Order :

    CNC Angle punch-shear-mark machine Rigid and compact structure; High productivity with automatic marking, punching and cutting off and stacking operations; Only size of angle, diameter of hole, position and number of workpiece are needed to be put in during programming. Providing net interface, data can be shared by connecting production line with the local network of designing department
    • 161/33 Moo 1,Plutaluang Sattahip
    • +66 38 110789
    • +66 33 132800

  • PLATE DRILLING

    Harga :

    Minimal Order :

    Today the TIPO B system is the most innovative solution for the fabrication of plates for many varied industries.

    TIPO B has been designed with the aim to integrate all the functions which are required in plate fabrication.

    The ability to start with raw material and end with the finished part after completion of all the necessary operations such as drilling, milling, punching, marking, scribing and cutting the part to the desired size and shape is what makes the TIPO B truly unique. The CNC line model TIPO B consists of a closed bridge press frame that includes a punching head, drilling head, tool changer, marking unit, plasma cutting unit and an oxyfuel cutting unit that is capable of processing plates from 6 mm to 100 mm in thickness and up to 2540 mm in width.

    The infeed and outfeed conveyor can be configured with additional sections of conveyor in order to achieve the desired length of plate to be processed starting from the standard length of 6 metres. The plate positioning is accomplished with a lateral material clamping device that positions the material to precise tolerances regardless of any irregularities in the plate edge condition from the rolling process or from the removal of prior piece parts that were generated from the stock plate. A two/three gripper system with a very precise rack and pinion linear device is used to position the plate and measure its actual location. A 1000 kN hydraulic punching head is typically utilized to generate holes in plates up to 25 mm thickness.

    Quick punching is integrated with the thermal cutting for maximum productivity.

    The plate and the punching head move fast transferred to the programmed position through rack and pinion and brushless motors. A high performance machining spindle capable of up to 3000 RPM with a ball screw feed can be furnished to add significant perforating capabilities to the TIPO B.

    A tool-changer with 5 positions can be combined with the drilling head to allow the automatic processing of parts within a nest that requires the production of different operations or hole sizes.

    The robust drill head of the TIPO B has a spindle (19 kW / 25 hp) with an ISO 45 tool holder which is suitable for lateral and frontal milling operations.

    This combination of power and speed takes full advantage of not only high speed steel drills with internal/external lubrication, but also high performance insert tools such as carbide.

    The TIPO B can be equipped with an 80 kN marking unit having a disc with 38 alphanumeric characters. The marking head can quickly generate part identification marks that are deep enough to remain readable, even after painting or galvanizing.

    The system is provided with a Hypertherm 260A torch for processing plates up to 38 mm in thickness. More powerful plasma units are available optionally.

    The plasma torch is utilized to contour a cutting operation of the parts from the nested stock plate.

    During the plasma cutting process, Ficep software monitors the power to the torch and adjusts its height position accordingly to grant the highest cut quality.

    By drilling a starter hole, it is possible to use the plasma to cut up to a thickness of 58 mm and higher with more powerful plasma units.
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123