Direktori Produk

Filter Pencarian

Negara

Indonesia (9)

Semua Negara (9)

Kategori Keanggotaan

Free (4)

Semua Kategori Member (4)

Kategori Perusahaan

Manufacturer (2)

Distributor (7)

Semua Kategori (9)


Reset pencarian

Produk terkait

  • MAYKESTAG END MILLS "SPEEDCUT"-ALUMINIUM DIN 6535-HA (SHANK)

    Harga :

    Minimal Order :

    Maykestag End Mills "Speedcut" - Aluminium are made of new micro-grain-carbide which produces higher toughness, hardness and bending strength. Maykestag manufactures Maykestag End Mills "Speedcut" - Aluminium with the most up-to-date coating technology for your stability and wear resistance. The Maykestag's optimised tool geometry provides higher tool stability (even in unstable working conditions) and a higher surface quality of the material to be machined. Maykestag End Mills "Speedcut" - Aluminium have universal applications on steels of up to approx. 50 HRC: Structural steels, free cutting steels, heat treatable steels, case hardening steels, nitriding steels, tool steels, spring steels, etc. It is possible to perform fine-finishing, finishing, rough finishing and roughing with the same tool. Maykestag End Mills "Speedcut" - Aluminium also offers different spiral angles (35°–38°).
    • Glodok Plaza Blok F No. 115 Kota Adm. Jakarta Barat

  • MAYKESTAG END MILLS - LONG SERIES, FOUR FLUTES

    Harga :

    Minimal Order :

    Maykestag End Mills – Long Series, Four Flutes are made of the best fine grain carbide which produces higher hardness, heat endurance and bending strength. Maykestag manufactures Maykestag End Mills – Long Series, Four Flutes with the most up-to-date coating technology for your stability and wear resistance. The Maykestag's optimised tool geometry provides higher tool stability (even in unstable working conditions) and a higher surface quality of the material to be machined. Maykestag End Mills – Long Series, Four Flutes are specially designed for finishing with high cutting performance and excellent surface. Compared with other milling cutters, Maykestag End Mills – Long Series, Four Flutes are better in performing climb milling. Maykestag End Mills – Long Series, Four Flutes are also available with ALUNIT coating and uncoated model for affordable alternative in cutting ferrous material. It is recommended for cutting in various materials, such as heat-treatable steels, non-ferrous metals, stainless and acid resistant steels. It is suitable for stainless steel material with tensile strength up to 1300 N/mm2, even the one with 45 HRC.
    • Glodok Plaza Blok F No. 115 Kota Adm. Jakarta Barat

  • ILIX 6040/5 - DRILL RECORD 4 S I

    Harga :

    Minimal Order :

    ILIX 6040/5 - DRILL RECORD 4 S I
    • Glodok Plaza Blok F No. 115 Kota Adm. Jakarta Barat

  • MAGAFOR MULTI-FUNCTION TOOL 8090

    Harga :

    Minimal Order :

    Magafor manufactures more than 250 product groups of mini cutting and detailed toolings solution in European Union. Magafor micro toolings have specific design for each of your machining applications. Magafor have produced even the smallest drills of 0.40mm diameter micro end-mill which are available in 26 different lengths and designs. Magafor styles, materials and lengths can also be custom ordered to meet varying application within specific machining technique. Magafor Multi-Function 8090 is the ideal tool for machine centers and NC processing machines. It is designed to combine multiple machining processes in order to reduce machine set-up time as well as operating time. The performance is also improved: fine cutting edge, improved deputing and surface finish, micro grain solid carbide, better resistance to wear and greater rigidity, 30° spiral, and facilitates chip removal. Angle 40° – 60° is special for engraving. Besides that, Magafor Multi-Function 8090 is easy to be stored, because there are fewer tools required and less stock required. Magafor Multi-Function 8090 Features: Micro milling capabilities suitable for all direction cut at micron precision for solid block of metal on CNC machinery and miniature metal working. Their reinforced shank offers a greater stability necessary to these high precision tools. Available on various diameter Pointy drill tip with carbide material is a reliably proven solution which provide steady rates of holemaking and reaming. Also available with tipping angle of 30°, 40° and 60° designs for various application.
    • Glodok Plaza Blok F No. 115 Kota Adm. Jakarta Barat

  • G END MILLS LONG TWO FLUTES, LIST 6232P

    Harga :

    Minimal Order :

    This is general coated long end mill for deep grooving Material : HSS-Co “Tin Coat” ( Titanium Coating )
    Size Range : 3.0 up to 50.0 mm
    Tolerance of Shank : h7 Tolerance of Milling :
    Dia 3.0 up to 10.0 mm
    + 0
    – 0.020 Dia 10.0 up to 30.0 mm
    + 0
    – 0.025 Dia 30.0 UP TO 50.0 mm
    + 0
    – 0.030
    • Jl. Krekot Jaya Blok AD No. 12 Kota Adm. Jakarta Pusat

  • G END MILLS LONG FOUR FLUTES, LIST 6212P

    Harga :

    Minimal Order :

    This is general coated long end mills for long side miling Material : HSS-Co “Tin Coat” ( Titanium Coating )
    Size Range : 3.0 up to 40.0 mm
    Tolerance of Shank Dia.: h7 Tolerance of Milling :
    Dia 3.0 up to 10.0 mm
    + 0.020
    - 0 Dia 10.0 up to 30.0 mm
    + 0.025
    - 0 Dia 30.0 up to 40.0 mm
    + 0.030
    - 0
    • Jl. Krekot Jaya Blok AD No. 12 Kota Adm. Jakarta Pusat

  • SIDE AND FACE MILLING CUTTERS

    Harga :

    Minimal Order :

    Deskripsi: Koves face mill with Integral type structure
    Rigidity increased,processing efficiency promotioned.
    • jl.raya serang-setu Block B2 NO 28 Kab. Bekasi

  • END MILLING CUTTERS WITH PARALLER SHANK

    Harga :

    Minimal Order :

    Deskripsi: - we have material grade : HRC45 ,50,55,60
    - size dia1.0 -20 mm standart and non standart
    - flute 2/3/4 F
    • jl.raya serang-setu Block B2 NO 28 Kab. Bekasi

  • G END MILLS FOR KEYWAY TWO FLUTES, LIST 6244P

    Harga :

    Minimal Order :

    This is coated end mill for key way miling Material : HSS-Co “Tin Coat” ( Titanium Coating )
    Size Range : Dia. 3.0 up to 20.0 mm
    Tolerance of Shank Dia.: h7 H Type :
    Tolerance of Milling :
    Dia 3.0 up to 10.0 mm
    + 0.025
    + 0.005
    Dia 11.0 up to 15.0 mm
    + 0.03
    + 0.01
    Dia.16.0 up to 20.0 mm
    + 0.035
    + 0.015 K Type :
    Tolerance of Milling
    Dia 3.0 up to 20.0 mm
    + 0
    – 0.02
    • Jl. Krekot Jaya Blok AD No. 12 Kota Adm. Jakarta Pusat