Direktori Produk

Filter Pencarian

Negara

indonesia (3)

Indonesia (66)

Semua Negara (69)

Kategori Keanggotaan

Platinum (25)

Free (19)

Semua Kategori Member (44)

Kategori Perusahaan

Manufacturer (5)

Distributor (42)

Supplier (4)

Fabricator (5)

Contractor (13)

Semua Kategori (69)


Reset pencarian

Produk terkait

  • MAGNOCHEM (MAG-DRIVE PUMPS), KSB INDONESIA
    Design 
    Horizontal, seal-less, mag-drive volute casing pump in back pull-out design to ISO 2858 / ISO 5199, single-stage, single-entry, with radial impeller. Design to ATEX. 
    Applications 
    Handling of aggressive, toxic, explosive, valuable, flammable, malodorous or harmful liquids in the chemical, petrochemical and general industry. Overview of technical data Type of impeller Multi- vane impeller;Closed;Closed / Radial;Radial Type of installation Long- coupled Maximum drive rating 220 kW Impeller material (EN standard) JS 1025; JL 1040;NORIDUR 1.4593;1.4408 Type of bearing Ball and plain bearings Drive frequency 50 Hz / 60 Hz Maximum speed of rotation 3. 500 1/min Maximum flow rate 1. 400 m³/h Maximum discharge-side pressure 40 bar Casing material (EN standard) 1. 4408;1.7709;GP240GH+N;NORIDUR 1.4593 No. of impeller entries Single entry Casing material Special KSB material; Cast steel;Cast stainless steel Minimum flow rate 1 m³/h Suction characteristics Non- priming Drive voltage Low voltage eClass assignment 36410101; 36410100;36410000 Pull-out design Yes Pump set location Dry installed Heatable Yes Max. permissible fluid temperature 300 002 Main applications Industry and process engineering; Energy Type of installation Stationary Type of casing Volute casing Type of connection Flange Type of lubrication Product lubrication Type of drive Electric motor Installation position Horizontal Shaft material (EN standard) 1. 4313+QT780;1.4462 Type of coupling Direct Shaft seal type Magnetic drive Maximum head 236, 00 m Maximum rated pressure (discharge) PN 40 Minimum head 3, 50 m Nozzle position End suction Casing partition Radially split
    • Head Office, Factory & Service Kab. Bekasi
    • +6221 8998 3570
    • +6221 8998 3571
    • Jl Sari Indah V no.29 rt.05 rw.13 Kota Bandung
    • +62 22 7102053
    • German Centre Building, Jl. Kapten Subijanto Blok COA No.1 Kota Tangerang
    • +622 15376248
    • +6221537648
  • (HIGH-PRESSURE PUMPS), KSB INDONESIA
    Design 
    Horizontal, radially split, product-lubricated, multistage ring-section pump with radial impellers, axial and radial single-entry inlet. 
    Applications 
    Handling of feed water in power stations, boiler feed water and condensate in industrial facilities. Overview of technical data Type of installation Long- coupled Maximum drive rating 1. 200 kW Type of bearing Plain bearings Drive frequency 50 Hz / 60 Hz Maximum speed of rotation 3. 600 1/min Maximum flow rate 274 m³/h Maximum discharge-side pressure 140 bar No. of impeller entries Single entry Casing material Chrome steel; Cast steel Minimum flow rate 8 m³/h Suction characteristics Non- priming Drive voltage Low voltage, high voltage eClass assignment 36410101; 36410000;36410100 Other impeller types Closed / Radial Pump set location Dry installed Type of suction casing Annular casing Max. permissible fluid temperature 160 002 UNSPSC classification 4015150300 Type of discharge casing Annular casing Type of first impeller Closed / Radial Main applications Industry and process engineering; Energy Type of installation Stationary Type of connection Flange Type of lubrication Oil / Product lubrication Type of drive Electric motor, turbine Installation position Horizontal Maximum suction pressure 7 bar Type of coupling Direct Shaft seal type Mechanical seal Maximum head 1. 400,00 m Maximum rated pressure (discharge) PN 64, PN 100, PN 160 Minimum head 200, 00 m Type of stage casing Stage casing with diffuser Nozzle position Variable Casing partition Radially split

    • Head Office, Factory & Service Kab. Bekasi
    • +6221 8998 3570
    • +6221 8998 3571
  • ETASECO (CANNED MOTOR PUMPS), KSB INDONESIA
    Design 
    Horizontal / vertical, seal-less volute casing pump in back pull-out design with fully enclosed canned motor, low noise emission, with radial impeller, singlestage, single-entry, pump casing connecting dimensions to EN 733. 
    Applications 
    Handling of aggressive, flammable, toxic, volatile, or valuable liquids in the chemical and petrochemical industry, in environmental engineering and the general industry. Overview of technical data Type of impeller Multi- vane impeller;Closed;Closed / Radial;Radial Type of installation Close- coupled Maximum drive rating 18 kW Impeller material (EN standard) JL1040; JS1025 Type of bearing Plain bearings Drive frequency 50 Hz / 60 Hz Maximum speed of rotation 3. 500 1/min Maximum flow rate 250 m³/h Maximum discharge-side pressure 16 bar Casing material (EN standard) JS1025; JL1040 No. of impeller entries Single entry Casing material Cast iron; Nodular cast iron Minimum flow rate 3 m³/h Suction characteristics Non- priming Drive voltage Low voltage eClass assignment 36410100; 36410101;36410000 Pull-out design Yes Pump set location Dry installed Max. permissible fluid temperature 140 002 Main applications Industry and process engineering Type of installation Stationary Type of casing Volute casing Type of connection Flange Type of lubrication Product lubrication Type of drive Electric motor Installation position Horizontal or vertical Shaft material (EN standard) 1. 4021 Type of coupling Direct Shaft seal type Canned motor pump Drive IEC standardized motor Maximum head 100, 00 m Maximum rated pressure (discharge) PN 16 Minimum head 9, 00 m Nozzle position End suction Casing partition Radially split Connection to power supply 220/ 400/690 V, 3~
    • Head Office, Factory & Service Kab. Bekasi
    • +6221 8998 3570
    • +6221 8998 3571
  • CHTC (ULTRA-HIGH PRESSURE PUMPS), KSB INDONESIA
    Design 
    Horizontal, high-pressure barrel-type pump with radial impellers, single- and double-entry, multistage, with flanges / weld end nozzles to DIN and ANSI. 
    Applications 
    Handling of feed water and condensate in power stations and industrial facilities, generation of pressurized water for bark peeling machines and descaling equipment. Overview of technical data Type of installation Long- coupled Type of bearing Plain bearings Drive frequency 50 Hz / 60 Hz Maximum speed of rotation 6. 750 1/min Maximum flow rate 1. 278 m³/h Maximum discharge-side pressure 400 bar No. of impeller entries Single / Double entry Casing material Carbon steel; Chrome steel Suction characteristics Non- priming Drive voltage Low voltage, high voltage eClass assignment 36410000; 36410101;36410100 Pull-out design Yes Other impeller types Closed / Radial Barrel casing Yes Pump set location Dry installed Type of suction casing Annular casing Max. permissible fluid temperature 200 002 Type of discharge casing Annular casing Type of first impeller Single entry Main applications Energy; Industry and process engineering Type of installation Stationary Type of connection Flange, weld ends Type of lubrication Grease / Oil / Pressurized oil lubrication Type of drive Electric motor, turbine Installation position Horizontal Maximum suction pressure 30 bar Type of coupling Geared variable speed coupling; Gear;Variable speed coupling;Direct Shaft seal type Mechanical seal Maximum head 4. 000,00 m Maximum rated pressure (discharge) PN160; PN250; PN320; PN400 Type of stage casing Stage casing with diffuser Nozzle position Variable Casing partition Radially split
    • Head Office, Factory & Service Kab. Bekasi
    • +6221 8998 3570
    • +6221 8998 3571
    • Gedung Hayam Wuruk Indah Gedung HWI Lindeteves Lt. 2; Block B37 Kota Administrasi Jakarta Barat
    • +62 21 62318093
    • +62 21 62302763
  • KWP-BLOC (NON-CLOGGING IMPELLER PUMP), KSB INDONESIA
    Design 
    Horizontal, radially split volute casing pump in closecoupled design, single-stage, single-entry, available with various impeller types: non-clogging impeller and free-flow impeller. 
    Applications 
    Handling of pre-treated sewage, waste water, all types of slurries without stringy substances and pulps up to 5 % bone dry with a maximum density of 1.1 kg/dm3. Overview of technical data Type of impeller Closed; Multi-vane impeller;Free flow impeller;Radial Type of installation Close- coupled Maximum drive rating 22 kW Impeller material (EN standard) ERN; NORIDUR 1.4593 Type of bearing Rolling element bearings Drive frequency 50 Hz / 60 Hz Maximum speed of rotation 3. 500 1/min Maximum flow rate 330 m³/h Maximum discharge-side pressure 10 bar Casing material (EN standard) NORIDUR 1. 4593;JL 1040 No. of impeller entries Single entry Casing material Duplex steel; Cast iron Minimum flow rate 4 m³/h Suction characteristics Non- priming Drive voltage Low voltage eClass assignment 36410000; 36410100;36410103;36410101 Pull-out design Yes Pump set location Dry installed Max. permissible fluid temperature 100 002 Free passage 70 mm Main applications Industry and process engineering Type of installation Stationary Type of casing Volute casing Type of connection Flange Type of lubrication Grease lubrication Type of drive Electric motor Installation position Horizontal or vertical Shaft material (EN standard) 1. 4021;1.4462 Type of coupling Direct Shaft seal type Mechanical seal Maximum head 100, 00 m Maximum rated pressure (discharge) PN 10 Minimum head 2, 00 m Nozzle position End suction Casing partition Radially split

    • Head Office, Factory & Service Kab. Bekasi
    • +6221 8998 3570
    • +6221 8998 3571
  • AMALINE (PROPELLER PUMPS), KSB INDONESIA
    Design 
    Wet-installed, horizontal propeller pump with submersible motor, equipped with spur gear or direct drive, ECB propeller with 3 rigid, fibre-repellent blades, bolt-free connection to the discharge pipe, explosion protection to ATEX II 2G Ex dc IIB T4. 
    Applications 
    Recirculation of activated sludge in waste water treatment systems. Overview of technical data Maximum drive rating 16 kW Type of bearing Rolling element bearings Drive frequency 50 Hz / 60 Hz Maximum speed of rotation 960 1/min Drive voltage Low voltage eClass assignment 00000000 Pump set location Wet well Explosion protection ATEX II 2GEXDCIIBT4 Max. permissible fluid temperature 40 002 Main applications Waste water / sewage Type of installation Stationary Type of lubrication Grease lubrication Type of drive Electric motor Minimum propeller diameter 800 mm Installation position Horizontal Self-cleaning Yes Type of coupling Direct; Gear Shaft seal type Mechanical seal Drive Electric motor Connection to power supply 400 V, 3~
    • Head Office, Factory & Service Kab. Bekasi
    • +6221 8998 3570
    • +6221 8998 3571
  • (DRY WELL PUMPS), KSB INDONESIA
    Design 
    Horizontal, radially split volute casing pump in back pull-out-design, single-stage, single-entry, available with various impeller types: non-clogging impeller, open multi-vane impeller, free-flow impeller. Design to ATEX. 
    Applications 
    Handling of pre-treated sewage, waste water, all types of slurries without stringy substances and pulps up to 5 % bone dry with a maximum density of 1.4 kg/dm3. Overview of technical data Type of impeller Free flow impeller; Closed;Radial;Multi-vane impeller;Open Type of installation Long- coupled Maximum drive rating 1. 500 kW Impeller material (EN standard) CERAMIKPOLYSIC; ERN;NORICHROM;NORICLOR;NORIDUR 1.4593;NORIHARD Type of bearing Rolling element bearings Drive frequency 50 Hz / 60 Hz Maximum speed of rotation 3. 500 1/min Maximum flow rate 15. 000 m³/h Maximum discharge-side pressure 10 bar Casing material (EN standard) CERAMIKPOLYSIC; JL1040;NORICLOR;NORICROM;NORIDUR 1.4593;NORIHARD No. of impeller entries Single entry Casing material Special cast material; Cast iron;Duplex steel Minimum flow rate 4 m³/h Suction characteristics Non- priming Drive voltage Low voltage, high voltage eClass assignment 36410101; 36410000;36410100;36410103 Pull-out design Yes Pump set location Dry installed Max. permissible fluid temperature 280 002 Free passage 250 mm Main applications Industry and process engineering; Water;Waste water / sewage;Energy;Mining / Dredges Type of installation Stationary Type of casing Volute casing Type of connection Flange Type of lubrication Oil lubrication Type of drive Electric motor Installation position Horizontal Shaft material (EN standard) C45+ N Type of coupling Jack shaft / Belt drive;Direct;Gear Shaft seal type Mechanical seal; Gland packing Maximum head 140, 00 m Maximum rated pressure (discharge) PN10 Minimum head 1, 00 m Nozzle position End suction Casing partition Radially split

    • Head Office, Factory & Service Kab. Bekasi
    • +6221 8998 3570
    • +6221 8998 3571