Direktori Produk

Filter Pencarian

Negara

Indonesia (3)

Semua Negara (3)

Kategori Keanggotaan

Platinum (3)

Semua Kategori Member (3)

Kategori Perusahaan

Manufacturer (3)

Semua Kategori (3)


Reset pencarian

Produk terkait

  • TEMPERATURE / PROCESS CONTROLLERS - ASIA PERDANA INDORAYA

    Harga :

    Minimal Order :

    Temperature / Process Controllers Heater Current Monitoring A Current transformer input provides display of the heater current and a health check on the load. Partial load failure. heater open circuit and SSR faults are detected and displayed as scorling alarm messages as well as providing an alarm output. on the 3208 and 3204 a front panel ammeter displays the heater current.   Setpoint Programer  Heat treatmen profiles can be programed using the 8-segment programer. Holdback, at the begining of each segment can be used to guarante the soak periods. A digitak event output can be triggered in any segment to intiate within the process   Custom Text Messaging Custom Messagges can be created with iTools and downloded to the 3200 to display when an event, alarm or procces condition occurs. This provides the operator with good visibility of the status of the process   Remote Setpoint An option Exists for the 3200 to have a Remote Analogue Input. This can be either volts or ma and is used to allow the setpoint to be generated by a master controller or PLC
    • Jl. Kelapa Molek VII Blok O.2 No.10 Kota Adm. Jakarta Utara
    • +62 21 4516726
    • +62 21 4508572

  • ELECTRICAL CALIBRATION - DUAL LOOP CONTROLLER / PROGRAMMER - ASIA PERDANA INDORAYA

    Harga :

    Minimal Order :

    Dual Loop Two independent PID loops make the 3500 ideal for interactive processes such as those found in carburising furnances. environmental chambers and autoclaves. The loops ,ay also be 'soft' wired together in creative ways to  create cascade. Ratio or other inteligent control strategies.   Setpoin Programmer Heat treatment and othwr proceses often require the ability to change setpoints with me. The dual loop 3500 has two programers which can be configurared as synchromised or independent programs. 50 programs with  up to two channels can be stored with a total of 500 segments.   Input / Output Flexybility A Range of plug-in I/O modules caters for individual application requirements minimising stock and spares holding, A total of sixteen module types, including relay, logic, triac and analoge, are available to fit into either three slots on 3508 or six slots on 3504.   Carbon Potential The 3500 calculates carbon potential from measuring both the oxygen Concentration and temperature of a funance using a zirconia probe. This enables a dual loop 3500 to be used to control both carbon potential and temperature in an atmosphere controlled funance.
    • Jl. Kelapa Molek VII Blok O.2 No.10 Kota Adm. Jakarta Utara
    • +62 21 4516726
    • +62 21 4508572

  • ELECTRICAL CALIBRATION - INFRARED CLIP CONECTED TO THE 3504 - ASIA PERDANA INDORAYA

    Harga :

    Minimal Order :

    Customised Solutions The 3500 is more than just a process controller, It also provides selection of application blocks including maths, logic and timing  =functions offering the abilty to develop custom user page feature allows an operator to view current information in a style most suitable to the process and terminology of the industry.   Communications The 3500 is deigned to intergrate seamlessly with programmable logic controllers and other supervisory system. A wide range of  serial communication option are created for including EIA232 and EIA485 using the Modbus RTU protocol along with profibus DP and DeviceNet, Ethernet connectivity is aachieved using thr Modbus TCP protocol.   Recipes Using a PC tool recipes can be created than can be used to change the operating parameters of the 3500 simply by selecting a new recipe via the HMI. This is very useful where multiple products are processed using the same controller but require deifferent parameters to be set.   Infared Configuration adaptor Communications to the 3500 can be achieved by usibg an infrared adaptor. Cliping onto the front fascia it provides iTools Communications allowing configuration and commissioning to be performed without the need to acces the rear terminals of the controller
    • Jl. Kelapa Molek VII Blok O.2 No.10 Kota Adm. Jakarta Utara
    • +62 21 4516726
    • +62 21 4508572