Negara

Indonesia (15)

USA (9)

Semua Negara (24)

Kategori Member

Platinum (1)

Free (3)

Semua Kategori Member (4)

Kategori Perusahaan

Manufacturer (12)

Distributor (1)

Contractor (11)

Semua Kategori (24)

wall form work panel

Konten Dimensi Produk belum tersedia

Keterangan

Wall formwork consists of vertically arranged upright timbers (formwork bearers) to which sheeting boards are nailed at the concrete side. The upright timbers are diagonally braced by means of boards at both sides.On cleats situated at every third upright timber, there are horizontally arranged walers. The opposite walers are tied at specified distances.Prefabricated sheeting panels may also be used instead of sheeting boards.

 

 

Konten Indikasi Harga belum tersedia

Produk terkait

  • KAWAT BRONJONG SNI
    Dear Customer. CV. DUA PUTRA PETIR MENJUAL KAWAT BRONJONG PABRIKASI / KAWAT BRONJONG MESIN , KAWAT BRONJONG SNI , KAWAT BRONJONG MANUAL .

    KEGUNAAN KAWAT BRONJONG :
    - PENCEGAHAN EROSI PADA TANGGUL SUNGAI
    - PELINDUNG KELUARAN GORONG-GORONG
    - PELINDUNG PENYANGGA JEMBATAN
    - PERLINDUNGAN GARIS PANTAI

    MENYEDIAKAN
    - BRONJONG SNI 03-0090-1999 YANG PRODUKSI MESIN ( BRONJONG PABRIKASI)
    - BRONJONG KAWAT MANUAL
    - BRONJONG PVC SNI 03-3046-1992 ( PVC COATED GABION )
    - GEOTEXTILE 150 GR , GEOTEXTILE 200 GR , GEOTEXTILE 250 GR , GEOTEXTILE 300 GR
    - WIRE NETTING DENGAN LEBAR 1 METER SAMPAI 4 METER DENGAN PANJANG 50 M SAMPAI 150 M
    - SACK GABION DENGAN PANJANG MULAI 2 METER SAMPAI 4 METER DENGAN DIAMETER MULAI DARI 0.45 METER SAMPAI 0.85 METER

    HARGA KAWAT BRONJONG ( HARGA GABION ) PER 17 PEBRUARI 2014 :
    - 2 X 1 X 0.5 ( 2.7 MM) : RP 195.000 ( PRODUKSI MESIN)
    - 2 X 1 X 0.5 ( 2.7 MM) : RP 155.000 ( PRODUKSI MANUAL)
    - 2 x 1 x 1 ( 2.7 MM) : RP 285.000 ( PRODUKSI MESIN)
    - 2 X 1 X 1 ( 2.7 MM) : RP 240.000 ( PRODUKSI MANUAL)
    - 2 x 1 x 0.5 ( 3 MM) : RP 245.000 ( PRODUKSI MESIN )

    HARGA BRONJONG MURAH MULAI DARI HARGA RP 85.000

    BERIKUT INI INFORMASI HARGA BRONJONG PVC PER TANGGAL 24 OKTOBER 2012 :
    - PVC 2 X 1 X 0.5 ( 2.7 MM) : RP 330.000 ( PRODUKSI MESIN )
    - PVC 2 X 1 X 1 ( 2.7 MM) : RP 520.000 ( PRODUKSI MESIN ) CV.DUA PUTRA PETIR Bukit Palma C5/33 Citraland Utara – Surabaya Telp. 03188000026/27 Telp . 03317406677 / 7407380 Fax : 031-7417127 Email: duaputrapetir@gmail.com Website : www.besisurabaya.com  www.duaputrapetir.co.id   www.duaputrapetir.indonetwork.co.id , www.jualpolycarbonate.indonetwork.co.id  www.jualbesisurabaya.indonetwork.co.id www.besibetonsnisurabaya.blogspot.com www.besikanal.blogspot.com  www.tandonairpenguin.blogspot.com  www.tandonairmurah.blogspot.com www.duaputrapetir.blogspot.com
    • Bukit Palma C5/33 Kota Surabaya
    • +62 31 7406677
    • +62 31 7417127
  • HANDSET PANEL WALL FORMWORK (PERI PRODUCTS)
    The Panelized Formwork System. Advantages Small number of panel sizes Just 3 Elementheights and -widths ensures high utilisation for each component. Light elements with carrying handles Thanks to their lightness and ergonomic carrying handles, HANDSET Panel Wall Formwork panels can be shifted easily by hand. One connector - The HANDSET Panel Wall Formwork clip. It not only connects everything and fixes accessories, but also, whether inserted from the left or right, will always resist vibration. Practical arrangement of tie points. This avoids the need to drill additional tie holes, and allows the panels to be offset without additional components.
    • Jl. Penjernihan No.40 Kota Administrasi Jakarta Pusat
    • +62 21 571 2644
    • +62 21 571 2633
  • PERI GRV CIRCULAR FORMWORK
    Tie-less circular formwork with articulated walling Advantages The tie-less formwork system for circular structures When used in a closed ring PERI GRV functions without any ties Whether large or small radii. The savings achieved in this way are considerable. Cost-effective custom solutions for arched bridges with GRV PERI GRV articulated waler is always the most economical solution for circular, segmental, compound and other arch shapes Continuously adjustable to any radius The patented joints of the PERI GRV waler allow even smallest pin pitch circle radii down to 0.60.
    • Jl. Penjernihan No.40 Kota Administrasi Jakarta Pusat
    • +62 21 571 2644
    • +62 21 571 2633
  • VARIO GT 24 GIRDER WALL FORMWORK (PERI PRODUCTS)
    The variable girder wall formwork system with the proven lattice girder PERI GT 24. Advantages   Steel and Cap   The rivetted steel cap strengthens the end of the girder, reduces flange splitting and prevents the end being sawn off accidentally.   Applications/Functionality   VT 20K Girder Formwork used for all areas of the establishment,especially at Walls,Columns, Slab and the establishment of special formwork.   As a Diversion Load Pressure From Concrete   VT 20K is used to build the wall formwork elements. VT 20K serves to support the plywood that has direct contact with the concrete for pavement. VT 20K shifted from concrete to steel pressure Walers that support the opposite side of the plywood. VT 20K and Steel Waler connected via Hook Strap.   As a Secondary Beams   VT 20K girder is used as the support provided by the crosshead or clawhead, or direct head prop Plate slab. It is also used as a secondary beam to transfer loads to the plate girder.   Lightweight Easily Assembled and Disassembled   Because light, VT 20K basically move, assembled and disassembled by hand. The damage does not occur through the use of the machine. Damage can occur if the VT 20K fell to the ground from great heights or shortened by means of a saw.   Easy To Saved   VT 20K is stored in a horizontal position. The entire surface of the VT 20K to be supported to avoid damage to a surface.
    • Jl. Penjernihan No.40 Kota Administrasi Jakarta Pusat
    • +62 21 571 2644
    • +62 21 571 2633
  • DOKA TIMBER-BEAM FORMWORK / LARGE-AREA FORMWORK TOP 100 TEC (WALL SYSTEMS)
    The su­per-strong tim­ber-beam form­work for max­i­mum cost-ef­fi­cien­cy
    • 214 Gates Road Little Ferry
    • +201 329 7839
    • +201
  • RETAINING WALL
    Retaining/Pile walls are formed by constructing series of intersecting/in close proximity reinforced bored piles and commonly used in deep excavations and slope stabilization. This method is commonly used in projects that are located in a densely populated area adjacent to buildings and roads. Our drilling rigs have the ability to minimize noise and vibration. Most importantly, with our technologically advanced drilling rig, we can control the bored hole
    • Komplek Majapahit Permai Blok B. 120-121 Kel. Petojo Selatan, Kec. Gambir Kota Jakarta Pusat
    • +62 21 3850157
    • +62 21 34831225
    • Jl. Taman Surya Raya Ruko Palm Terrace Blok GG4 No. 60 Pegadungan Kota Administrasi Jakarta Barat
    • +62 21 2952 8107
    • +62 21 2952 8107
  • DOKA TIMBER-BEAM FORMWORK / WALL FORMWORK FF100 TEC (WALL SYSTEMS)
    The site-ready tim­ber-beam form­work for high-spe­c­i­fi­ca­tion con­crete fin­ish­es
    • 214 Gates Road Little Ferry
    • +201 329 7839
    • +201
    • Jl.Raya pasar Minggu No 17A Pancoran Jakarta Kota Administrasi Jakarta Selatan
    • +62 21 79946666
    • +62 21 822 92 11
    • Jl.Raya pasar Minggu No 17A Pancoran Jakarta Kota Administrasi Jakarta Selatan
    • +62 21 79946666
    • +62 21 822 92 11