Abrasion resistance Epoxy Paint

Filter Pencarian

Negara

Indonesia (7)

Semua Negara (7)

Kategori Member

Platinum (1)

Free (6)

Semua Kategori Member (7)

Kategori Perusahaan

Producers (7)

Semua Kategori (7)

Produk terkait

  • HEMPADUR QUATTRO 17634
    Description
    HEMPADUR QUATTRO 17634 is a two-component universal epoxy paint, which cures to a hard and tough coating with good resistance to abrasion, seawater and various oils. Area of use
    As a universal epoxy and self-primed high performance coating system for atmospheric or in-water service, including water ballast tanks to be coated according to IMO-PSPC requirements (Resolution MSC.215(82)). HEMPADUR QUATTRO 17634 is intended for all year application down to -10°C/15°F and for in-shop applications where fast recoating and handling is required.
    Segments
    Marine, Protective
    • Jl Raya Sultan Agung Km 27 Pondok Ungu Kota Bekasi
    • +62 21 8843385
    • +62 21 8840820

  • NOVA SUPERECO EPOXY HEAVY DUTY COATING FOR REPAIRS TO WATER BALLAST TANKS
    Due to the anticorrosive properties, tar epoxy coating materials were used in  continuously submerged conditions, often exposed to severe corrosive environments. With the increasing awareness of environmental issues and human health concerns, the current trend is elimination of the use of tar epoxy coatings, however, some existing ships have their water ballast tanks coated with tar epoxy coatings. When it comes to repairing these tanks, several pretreatment procedures such as sand blasting may be required prior to coating, resulting in high cost and in an increase in the number of processes.NOVA SUPERECO not only contributes to cost savings and achievement of fewer processes but also provides benefits in reducing VOC, safety and health aspects. This light coloured, high solids product exhibits excellence in anticorrosion performance and can also be used for repairing epoxy coatings.
    • Gedung Mid Plaza I Lt 8, Jl. Jendral Sudirman Kav 10-11 Kota Adm. Jakarta Pusat
    • +62 21 5700515
    • +62 21 5733787

  • ALKALI RESISTING PRIMER
    Alkali Resisting Primer
    • Jl Raya Cimareme 185A Kota Bandung

  • SIGMASHIELD 420 (REINFORCED EPOXY FOR ALL-ROUND ABRASION-RESISTANCE SERVICE)
    High-solids, reinforced epoxy for all-round abrasion-resistance service
    It can be used on all areas subject to heavy wear and tear including the underwater hull, topsides, decks and holds. Excellent all-round anticorrosive for use on almost all areas subject to heavy wear and tear Excellent abrasion resistance Low-temperature and tropical-grade versions also available Especially suitable for use in cargo holds and as underwater and boottop anticorrosive Can be top-coated with finishes, tiecoats and antifoulings or left uncoated  
    • Pulogadung Industrial Estate Jl. Rawagelam III No.1 East Jakarta Kota Adm. Jakarta Timur
    • +6221 4605710
    • +6221 4610454

  • SIGMAGLIDE 790 (EPOXY ANTICORROSIVE COAT)
    TIECOAT – PROVIDING A SOUND BOND BETWEEN EPOXY ANTICORROSIVE COAT AND THE SILICONE FINISH
    Two pack, silicone-based tiecoat for fouling release Essential for adhesion of SIGMAGLIDE system on epoxy anticorrosive Tough Quick drying and fast to overcoat Wide application window
    • Pulogadung Industrial Estate Jl. Rawagelam III No.1 East Jakarta Kota Adm. Jakarta Timur
    • +6221 4605710
    • +6221 4610454

  • PHENOLINE 353 (EPOXY NOVOLACS)
    Phenoline 353 is a highly cross-linked epoxy lining with extraordinary overall chemical resistance and versatility. It has a unique blend of resins that make it highly resistant to a variety of aggressive cargos like ethanol, gasolines, gasoline blends, biodiesel, fuel oils, and others. It can be used is both acidic and high temperature caustic exposures. Markets served are terminals, refineries, petrochemical, wastewater, railcar linings, and many others.
    • Menara 1 Sentra Kelapa Gading, 7fl Room 706, Jl. Bulevard Kelapa Gading LA3 No.1 Kota Adm. Jakarta Utara

  • FLOORGUARD 100
    Epoxy topcoat 2 parts with high gloss, extreamly durable and resistance to chemicals, acid, alkali, abrasion suitable for top coat on industrial floor with film thickness 100 microns. Typical use as follows; Industrial warehouses Car service center lab Clean Room Runway of the forklift Repair shop workshop Factory floor
    • APL Tower Unit T5,Lanai 17.JI. S.Parman Kota Adm. Jakarta Barat