Negara

Indonesia (6)

Semua Negara (6)

Kategori Member

Free (6)

Semua Kategori Member (6)

Kategori Perusahaan

Manufacturer (6)

Semua Kategori (6)

Exploration drill rigs

Konten Indikasi Harga belum tersedia

Produk terkait

  • ID1000 HELI-PORTABLE DRILL RIG
    The ID1000 is equipped with PQ-sized heads. These rigs are capable of 250 metres PQ, 500 metres HQ and 1,000 metres in NQ coring.
    • Jl.Raya Ciawi No.357, Tajur Bogor Kab. Bogor

  • GEOSONIC MINI
    A sonic drill rig appears and operates very much like any conventional top-drive rotary rig. The main difference is that a sonic drill rig has a specially designed hydraulically powered drill head or oscillator, which produces adjustable high frequency vibratory forces. This has the smallest footprint of the 2 rigs with a depth capacity of 70M
    • Jl.Raya Ciawi No.357, Tajur Bogor Kab. Bogor

  • ID500 HMP TRACK MOUNTED MULTI-PURPOSE DRILL RIG
    Very Small Footprint for a Multi-Purpose Rig, this rig is powered by a Doosan 4 Cylinder turbo-charged diesel engine. It has depth capabilities of 100 metres PQ, 250 metres HQ and 550 metres NQ. RC 150 Metres
    • Jl.Raya Ciawi No.357, Tajur Bogor Kab. Bogor

  • ID350 LIGHT-WEIGHT, MAN-PORTABLE DRILL RIG
    Engine: Kubota V 1505T 37 HP continuous @ 3000Rpm Hydraulics: 1x Variable displacement piston pump. 120 litres OR 1x 2 segment fixed displacement gear pump 60 litres and 30 litres Filtration: In-Tank filter on return Oil Heat Exchanger: Hydraulic Oil returns via water cooler Mast: 2 section lattice boom construction, Allows 3.6 metres head travel via hydraulic cylinder, travelling block, wire rope and pulleys. Mast Length 7.5 Metres allows for 6 Metre rod pull, Mast angle 90 to 45 Degree from Horizontal Pull Back: 3,200Kg @ 210 Bar Pull Down: 1,800Kg @ 80 Ba Main Winch: 2,700Kg @ 180 bar bare drum pull, 18 Metres 12mm wire rope Wire Line Winch: 1800Kg @ 170 bar, bare drum line pull 400 metres 6mm wire rope. Rotation Head: Oil bath single gear reduction, 3.3:1 Piston motor torque, speed 750rpm, Torque 330 Nm @ 210 Bar, Head slide to allow 6 Metre rod pull. Control Panel: Mast tilt and mast dump are at the main chassis, all other hydraulic controls are at the articulated remote station for safe control and vision. Head Traverse: Fast feed 0.5 M per sec, slow feed 0-2 M per min. Foot Clamp: Hydraulic single cylinder 2 jaw Tungsten insert to accommodate PQ/HQ/NQ Drilling Capacity: PQ - 80 Metres / HQ – 180 Metres / NQ – 350 Metres. Approximate Overall Rig Weight: 2,100Kg
    • Jl.Raya Ciawi No.357, Tajur Bogor Kab. Bogor

  • ID2000 TRACK-MOUNTED DRILL RIG
    This rig is powered with a Cummins 6CTA-ll 260hp. It has a capacity of 450 metres PQ, 1,000 metres HQ and 1,800 metres in NQ coring.
    • Jl.Raya Ciawi No.357, Tajur Bogor Kab. Bogor

  • ID500T TRACK MOUNTED DRILL RIG
    Track Mounted this rig has depth capabilities of the following. PQ 200m HQ 350m NQ 500m.
    • Jl.Raya Ciawi No.357, Tajur Bogor Kab. Bogor