Negara

China (13)

India (3)

South Africa (1)

United States (2)

Germany (36)

Indonesia (6)

USA (5)

United Kingdom (8)

Japan (5)

Taiwan, Province of China (9)

Spain (1)

Semua Negara (89)

Kategori Member

Platinum (21)

Free (1)

Semua Kategori Member (22)

Kategori Perusahaan

Manufacturer (83)

Distributor (4)

Supplier (2)

Semua Kategori (89)

Circular Saw Cutting Machine

Keterangan

The circular saw is a machine using a toothed metal cutting disc or blade. The term is also loosely used for the blade itself. The blade is a tool for cutting wood or other materials and may be hand-held or table-mounted. It can also be used to make narrow slots (dados). Most of these saws are designed with a blade to cut wood but may also be equipped with a blade designed to cut masonry, plastic, or metal. There are also purpose-made circular saws specially designed for particular materials. While today circular saws are almost exclusively powered by electricity, larger ones, such as those in sawmills, were traditionally powered by water turning a large wheel. A special arrangement involves the use of a hydraulic motor to propel the circular saw. This allows it to be fastened to heavy equipment, eliminating the need for a separate energy source.

Konten Indikasi Harga belum tersedia

Produk terkait

  • EISELE HIGH-PERFORMANCE AUTOMATIC CIRCULAR SAWS HCS DISPOSAL DEVICES
    Custom Disposal
    If you talk about the sawing process, you must also think about the disposal process. Whether merely evacuating the cut pieces or feeding them to subsequent processing stations – We can handle your cut pieces and guide them to wherever you like.
    • Maschinenfabrik und Eisengießerei Industriestraße 23 Kirchardt
    • +49 72662070
    • +49 72 66207500

  • EISELE AUTOMATIC CIRCULAR SAWS FOR ALUMINIUM AND NF METALS VA-L LOADING MAGAZINE
    Gentle and safe charging process
    Make sure you make the very most of the VA-L’s performance potential: Using a material feed system configured ideally to the sawing process, you can maximize your sawing output.
    Our approach to maximized potential: Parallel reloading and productive time. To minimize set-up times, the next material load is positioned and automatically fed during the previous sawing process.
    Just like the circular sawing machines themselves, the design of our loading magazines consistently seeks to minimize material damage.
    • Maschinenfabrik und Eisengießerei Industriestraße 23 Kirchardt
    • +49 72662070
    • +49 72 66207500

    • Maschinenfabrik und Eisengießerei Industriestraße 23 Kirchardt
    • +49 72662070
    • +49 72 66207500

  • EISELE UP-STROKING CIRCULAR COLD SAWS FOR BENT PIPES PSU 450 GS / PSU 450 GS DYNAMIC
    Specialist in the sawing of bent pipes
    When it comes to sawing bent pipes such as sound absorber, hydroforming or exhaust pipes, the  PSU 450 GS is an outright specialist. The use of standardized fixtures and the level material table are designed to accommodate individual workpiece fixtures on which the saw entry and exit point can be freely adjusted as required. With two-handed operation as standard, convenient, safe working is possible without the need for obstructive mechanical safeguards.
    • Maschinenfabrik und Eisengießerei Industriestraße 23 Kirchardt
    • +49 72662070
    • +49 72 66207500

  • BROACHING MACHINE (CIRCULAR SAW CUTTING MACHINE)
    Relying on its experience in refurbishing and transformation of broaching machine, Fives has developed an horizontal broaching machine especially designed to broach discs and turbine blades. With its many references and its unique expertise in the area of broaching, Fives is able to develop specific broaching solutions according to your specific needs. According to the shape to be obtained, various types of solutions can be proposed: High broaching speed High efficiency using multi broaching process Adapted power and pulling force Complementary full CNC axis control Auxiliary and optional equipment
    • DEA Tower 3rd Floor Kota Adm. Jakarta Selatan
    • +62 21 5762660
    • +62 21 5762661

  • EISELE AUTOMATIC CIRCULAR SAWS FOR ALUMINIUM AND NF METALS VA-L 350 AND VA-L 560
    Short processes in sawing operation
    Key features of the series are the robust design, state-of-the-art drive technology used in the feed axis and main drive system, and the extreme rigidity of the ultra-precise saw spindle bearing. The result: an optimized, low-vibration cutting process providing extreme cutting output, excellent surface quality and maximum availability.
    Pneumatic or hydraulic clamping
    You have the choice between a pneumatic clamping fixture for gentle clamping and a hydraulic alternative for greater power when processing predominantly solid material. For parallel cuts, both systems are able to cope easily even where a slight torsion exists in the material.
    • Maschinenfabrik und Eisengießerei Industriestraße 23 Kirchardt
    • +49 72662070
    • +49 72 66207500

  • EISELE AUTOMATIC MITRE-CUTTING CIRCULAR SAWING CENTER PSU 450 A
    UP-STORKING MITRE CIRCULAR COLD SAW PSU 450 A
    Flexible PC-controlled high-performance circular sawing centre PSU 450 A combines economical cuts and high plant output with outstanding operating convenience. Its high level of automation and its flexibility cover a wide application spectrum. It is capable of processing profiles and pipes as well as solid material of different dimensions in fully automatic operation. Three servo motor axes for material length positioning, mitre angle setting and the discharge gripper ensure maximum plant throughput. The discharge device grips the part to be sawn, and once the cut is complete deposits it out of the machine area in a freely programmable position. Suitable infeed magazines are also supplied from a single source by BEHRINGER EISELE. Link-up to automated storage systems is also possible.
    • Maschinenfabrik und Eisengießerei Industriestraße 23 Kirchardt
    • +49 72662070
    • +49 72 66207500

  • EISELE HIGH-PERFORMANCE AUTOMATIC CIRCULAR SAWS HCS MULTI-FLUID
    Limits are newly defined
    Shorter cycle times, higher output – the Multi-Fluid concept of the HCS MF-series opens new horizons of efficiency thanks to its pinpoint cooling during the cutting process. The Multi-Fluid system is excellent for high-alloy stainless steels and tool steels, nickelbased alloys like Inconel and Hastelloy as well as titanium alloys.
    • Maschinenfabrik und Eisengießerei Industriestraße 23 Kirchardt
    • +49 72662070
    • +49 72 66207500

  • CUTTING MACHINE CIRCULAR SAW CS 230
    Main Applications : Steel Stainless steel Aluminum   Advantageous : Amazing performance cutting metals as easily as a conventional circular saws cut wood. Cuts efficiently and keeps cool Super-quick chip clearing with our unique bayonet-type blade cover latch Ergonomic handle shape and position with soft TPR grip the result of extensive lab testing for maximum comfort and fatigue free operation Our saws can bevel up to 45 degrees. We did not forget convenience, either. Our saws provide easy to read positive stops for all the most popular bevel angles, plus quick and easy adjustment High stability base with quick, tool-free depth adjustment including clearly marked scale High output motors for all the torque you need to perform even the most challenging cuts Safety features include a lock-off switch and spark/chip containing design Every feature comes together to provide exact, clean cuts with a variety of metals
    • Jl. Pangeran Jayakarta 141 Blok II No. C 4-5 Kota Adm. Jakarta Pusat
    • +62 21 6008460
    • +62 21 6244405

  • EISELE AUTOMATIC CIRCULAR SAWS FOR ALUMINIUM AND NF METALS VA-L LOADING MAGAZINE
    Gentle and safe charging process
    Make sure you make the very most of the VA-L’s performance potential: Using a material feed system configured ideally to the sawing process, you can maximize your sawing output.
    Our approach to maximized potential: Parallel reloading and productive time. To minimize set-up times, the next material load is positioned and automatically fed during the previous sawing process.
    Just like the circular sawing machines themselves, the design of our loading magazines consistently seeks to minimize material damage.
    • Maschinenfabrik und Eisengießerei Industriestraße 23 Kirchardt
    • +49 72662070
    • +49 72 66207500

  • EISELE LOADING MAGAZINES FOR PSU 450 A
    Bar loading magazine SM Automatic loading of round material Robust design, virtually maintenance-free Quick and simple loading process  
    • Maschinenfabrik und Eisengießerei Industriestraße 23 Kirchardt
    • +49 72662070
    • +49 72 66207500

  • EISELE AUTOMATIC MITRE-CUTTING CIRCULAR SAW PSU 450 M
    The automatic upstroking circular saw PSU 450 M with NC-controlled feed gripper offers astounding variability and extreme ease of operation
    The PSU 450 M from EISELE is a true all-rounder for cutting tubes, profiles, solids and angles.Impressive features include its high output, process reliability and simple handling. Its automatic mitre adjustment and servo motor-driven feed gripper make for extreme flexibility in this outstanding machine concept. Its modular structure allows the PSU 450 M to be combined with infeed magazines or disposal devices.
    • Maschinenfabrik und Eisengießerei Industriestraße 23 Kirchardt
    • +49 72662070
    • +49 72 66207500

  • CUTTING MACHINE CIRCULAR SAW CS 200
    Main Applications ; Steel Stainless steel Aluminum   Advantageous : Amazing performance cutting metals as easily as a conventional circular saws cut wood. Cuts efficiently and keeps cool Super-quick chip clearing with our unique bayonet-type blade cover latch Ergonomic handle shape and position with soft TPR grip the result of extensive lab testing for maximum comfort and fatigue free operation Our saws can bevel up to 45 degrees. We did not forget convenience, either. Our saws provide easy to read positive stops for all the most popular bevel angles, plus quick and easy adjustment High stability base with quick, tool-free depth adjustment including clearly marked scale High output motors for all the torque you need to perform even the most challenging cuts Safety features include a lock-off switch and spark/chip containing design Every feature comes together to provide exact, clean cuts with a variety of metals
    • Jl. Pangeran Jayakarta 141 Blok II No. C 4-5 Kota Adm. Jakarta Pusat
    • +62 21 6008460
    • +62 21 6244405

  • CNC COMMANDED SAW (FIVES INDONESIA)
    Multiple-use application Fives has long been specialized in the design of milling machines. Following on from this activity, Fives has developed fettling and cubing machines dedicated to the cubing of foundry parts from medium to large series, as well as several applications: sawing machine for carbon and graphite anodes. Fettling and cubing machines are designed for easy maintenance and to operate in foundries’ special environment. Relying on highly-skilled engineering teams, Fives can adapt the design to specific needs. The machine is completely protected and covered to comply with environmental and safety standards.
    • DEA Tower 3rd Floor Kota Adm. Jakarta Selatan
    • +62 21 5762660
    • +62 21 5762661

  • EISELE AUTOMATIC MITRE-CUTTING CIRCULAR SAWING CENTER PSU 450 A
    UP-STORKING MITRE CIRCULAR COLD SAW PSU 450 A
    Flexible PC-controlled high-performance circular sawing centre PSU 450 A combines economical cuts and high plant output with outstanding operating convenience. Its high level of automation and its flexibility cover a wide application spectrum. It is capable of processing profiles and pipes as well as solid material of different dimensions in fully automatic operation. Three servo motor axes for material length positioning, mitre angle setting and the discharge gripper ensure maximum plant throughput. The discharge device grips the part to be sawn, and once the cut is complete deposits it out of the machine area in a freely programmable position. Suitable infeed magazines are also supplied from a single source by BEHRINGER EISELE. Link-up to automated storage systems is also possible.
    • Maschinenfabrik und Eisengießerei Industriestraße 23 Kirchardt
    • +49 72662070
    • +49 72 66207500

  • CUTTING MACHINE DRY CUT DRC 355
    Main Applications : Steel Stainless steel Aluminum   Advantageous : The dry cut saw blade shears through the material 3 times faster than traditional cut off saw with abrasive All with less sparks, less heat and resulting accurate cutting, clean and practically free of burrs Superior TCT saw blade, only 2.4 mm metal loss Carriage lock Handy wrench storage Arbor lock See through protection shield Two pieces lower blade guard Tool free fence lock Chip tray High stability cast aluminum alloy base Fence with scale swivels 45 ° in right and left directions Quick lock vise with speed crank Soft Start with 2.200 watts motor Motor with auto stop carbon brush
    • Jl. Pangeran Jayakarta 141 Blok II No. C 4-5 Kota Adm. Jakarta Pusat
    • +62 21 6008460
    • +62 21 6244405

    • Maschinenfabrik und Eisengießerei Industriestraße 23 Kirchardt
    • +49 72662070
    • +49 72 66207500

  • EISELE HIGH-PERFORMANCE AUTOMATIC CIRCULAR SAWS HCS LOADING MAGAZINES
    Loading in a systematic way
    The demand for even shorter cycle times puts high demands on the material handling process. BEHRINGER EISELE provides the solutions – in a systematic way.
    The speed of the sawing process on a HCS depends on the material feed capacity. Therefore we optimize the material handling so that our customers can benefit 100 % from the performance of their HCS.
    Our approach is: material is reloaded during the main operation time (cutting time). To minimize set-up times, the next piece of material is loaded during the sawing process and automatically fed into the machine. To load the material into machine, various types of loading magazines are available.
    • Maschinenfabrik und Eisengießerei Industriestraße 23 Kirchardt
    • +49 72662070
    • +49 72 66207500

  • EISEL DISPOSAL DEVICES FOR PSU 450 A
    Customer-specific Disposal
    If you need space-saving and reliable solutions, just contact us. We are your competent partner and we provide comprehensive solutions for disposal and sorting:
    Inclined roller conveyors, disposal belts and hinged slat chain conveyors with sorting device are at your disposal.
    Integration into the whole process
    • Maschinenfabrik und Eisengießerei Industriestraße 23 Kirchardt
    • +49 72662070
    • +49 72 66207500

  • EISELE HIGH-PERFORMANCE AUTOMATIC CIRCULAR SAWS HCS 70 AND HCS 90 E
    The access to the „Upper Class“
    Large-scale production with a maximum of output and quality. An investment that pays off quickly.
    High-quality components and technical finesse make the HCS 70 and HCS 90 E a real BEHRINGER EISELE saw.
    Being reliably working saws, focused on the basics, they are the leaders in terms of performance in their class. A drive power of 8 kW and saw blade sizes of up to 315 mm provide for a large application range.
    • Maschinenfabrik und Eisengießerei Industriestraße 23 Kirchardt
    • +49 72662070
    • +49 72 66207500