Negara

China (1)

India (32)

Indonesia (3)

Taiwan, Province of China (3)

Italy (1)

Bulgaria (5)

Semua Negara (45)

Kategori Member

Platinum (3)

Free (5)

Semua Kategori Member (8)

Kategori Perusahaan

Manufacturer (44)

Distributor (1)

Semua Kategori (45)

Mesin Bor Duduk (Bench)

Konten Indikasi Harga belum tersedia

Produk terkait

  • CINCINNATI AUTODRILL (FIVES INDONESIA)
    Process complex part shapes with 6-axis machining Large machining range for extremely long, wide, and tall parts Ultra-precise carrier and surface detecting technology
    • DEA Tower 3rd Floor Kota Adm. Jakarta Selatan
    • +62 21 5762660
    • +62 21 5762661

  • EADU PNEUMATIC | ENHANCED AUTOMATED DRILLING UNIT (FIVES INDONESIA)
    The eADU  is a real technical breakthrough in the field of Automated Drilling for the Aerospace industry. The eADU Pneumatic architecture combines pneumatic motor / Electronic process / Mechanical feed with an embedded IPC (Intelligent Process Control) for programming and data recording.
    • DEA Tower 3rd Floor Kota Adm. Jakarta Selatan
    • +62 21 5762660
    • +62 21 5762661

  • FLOOR DRILL PRESS 32MM SWING 740MM
    Smooth running and powerful electrical motor SeparateEMERGENCY-STOP push button 400 volt types withright-handed/left-handed rotation Drilling depth stop Precisely worked working table with diagonally running T-slots Theworking table can be turned by 360deg. V-belt cover with safetyswitch V-belt tensioning device Long, ergonomic aluminiumdie-cast sleeve lever made of one piece with Softgrip handles
    • Kawan Lama Building, Jl. Puri Kencana No.1 Kota Adm. Jakarta Barat
    • +62 21 5828282
    • +62 21 5820088

  • COLUMN DRILLING MACHINES PK032A
    Technical Data Drilling capacity in steel St 60 32 mm Drilling capacity in cast iron GG20 38 mm Thred cutting capacity   Steel St60 M 22 Cast iron 20 M 30 Spindle taper MK 3 Spindle stroke 160 mm Transmission Gear box Electric motor – main drive   - speeds 750/1500 rpm - power 0,7/1,1 kW Number of spindel speeds 12 Spindel speed range 104-155-217-241-360-505-700-1050-1470 rpm Feed Automatic by mechanical clutch Number of automatic feeds 3 Spindel feed range 0,10-0,29 mm/rev Column diameter 130 mm Distance from spindle centre to column face 300 mm Distance between spindle and working table, min/max 80 / 785 mm Table working surface 400x480 mm Т-channels:   number x width 3x14 mm Rotating and tilting table plate 0 - 360°, ±90° Distance between spindle and base 1 280 mm Base working surface 440x425 mm Т-channels:   number x width 2x14 mm Machine weight  net 405 kg
    • 157A Rakovski Str. 1000, Bulgaria Sofia

  • COLUMN DRILLING MACHINE PK203
    Technical Data Drilling capacity in steel St 60 25 mm Drilling capacity in cast iron GG20 30 mm Thred cutting capacity   Steel St60 M 16 Cast iron 20 M 22 Spindle taper MK 3 Spindle stroke 160 mm Transmission Gear box and belt drive Electric motor – main drive   - speeds 750/1500 rpm - power 0,7/1,1 Kw Number of spindel speeds 12 Spindel speed range 95-150-190-250-380-500-600-760-1000-1200-2000 Feed Automatic by mechanical clutch Number of automatic feeds 3 Spindel feed range 0,1-0,16-0,32 mm/rev Column diameter 120 mm Distance from spindle centre to column face 285 mm Distance between spindle and working table, min/max 100/730 mm Table working surface 400x420 mm Т-channels: number x width 3x14 mm Tilting table plate ±90° Distance between spindle and base 1 210 mm Base working surface 440x425 mm Т-channels:   number x width 2x14 mm Machine weight  net 370 kg

    • 157A Rakovski Str. 1000, Bulgaria Sofia

  • COLUMN DRILLING MACHINE PK050A
    Technical Data Drilling capacity in cast iron GG20 60 mm Thred cutting capacity   Steel St60 M 42 Cast iron 20 M 60 Spindle taper MK 4 Spindle stroke 230 mm Transmission Gear box Electric motor – main drive   - speeds 1500 min-1 - power 3,0 kW Number of spindel speeds 9 Spindel speed range 54–75–109-169-237-344-507-712 -1032 rpm Feed Automatic by mechanical clutch Number of automatic feeds 4 Spindel feed range 0,10 - 0,20 - 0,30 -0,40 mm/rev Column diameter 230 mm Distance from spindle centre to column face 370 mm Distance between spindle and working table, min/max 142 / 773 mm Table working surface 520 x 620 mm Т-channels:   number x width 3 x18 mm Rotating and tilting table plate 0 - 360°; ±90° Distance between spindle and base 1300 mm Base working surface 550 x 530 mm Т-channels:   number x width 2 x 18 mm Machine weight  net 835 kg
    • 157A Rakovski Str. 1000, Bulgaria Sofia

  • COLUMN DRILLING MACHINE PK055A
    Technical Data Drilling capacity in steel St 60 55 mm Drilling capacity in cast iron GG20 65 mm Thred cutting capacity   Steel St60 M 42 Cast iron 20 M 60 Spindle taper MK 4 Spindle stroke 230 mm Transmission Gear box Electric motor – main drive   - speeds 1500 min-1 - power 4,0 kW Number of spindel speeds 9 Spindel speed range 54–75–109-169-237-344-507-712 -1032 rpm Feed Automatic by mechanical clutch Number of automatic feeds 4 Spindel feed range 0,10 - 0,20 - 0,30 -0,40 mm/rev Column diameter 200 mm Distance from spindle centre to column face 370 mm Distance between spindle and working table, min/max 100 / 730 mm Table working surface 520 x 620 mm Т-channels:   number x width 3 x18 mm Rotating and tilting table plate 0 - 360°; ±90° Distance between spindle and base 1300 mm Base working surface 550 x 530 mm Т-channels:   number x width 2 x 18 mm Machine weight  net 880 kg

    • 157A Rakovski Str. 1000, Bulgaria Sofia

  • COLUMN DRILLING MACHINES PK040A
    Technical Data Drilling capacity in steel St 60 40 mm Drilling capacity in cast iron GG20 50 mm Thred cutting capacity   Steel St60 M 30 Cast iron 20 M 40 Spindle taper MK 4 Spindle stroke 200 mm Transmission Gear box Electric motor – main drive   - speeds 1500 min-1 - power 2,2 kW Number of spindel speeds 9 Spindel speed range 81-115-162-226-321-452-637-904-1274 rpm Feed Automatic by mechanical clutch Number of automatic feeds 3 Spindel feed range 0,10 - 0,20-0,30 mm/rev Column diameter 160 mm Distance from spindle centre to column face 370 mm Distance between spindle and working table, min/max 80 / 785 mm Table working surface 480 x 560 mm Т-channels:   number x width 3 x18 mm Rotating and tilting table plate 0 - 360°; ±90° Distance between spindle and base 1170 mm Base working surface 470 x 515 mm Т-channels:   number x width 2 x 18 mm Machine weight  net 500 kg
    • 157A Rakovski Str. 1000, Bulgaria Sofia

  • PILLAR DRILL MACHINES
      Specification Pillar Drill Machine PRL &  PSL - 40    Tilting working table FIXED    Drilling capacity 40 mm    Pillar Diameter 121 mm    Spindle nose to table distance 595 mm    Distance from spindle nose to base distance 1050 mm    Distance from spindle center to pillar surface 320 mm ( MAX )    Table Travel 480 mm    Taper in spindle MT - 4    Number of speed 8 Speed    Range of Speed (RPM) 70 to 2000    Table Size (in mm) 410 x 410    Base size (Machined Area mm) 440 x 715    Overall Base Size (in mm) 445 x 720    Spindle Travel 250 mm    Pillar Length 1450 mm    Overall height with pulley guard 1860 mm    V-Belt section B - 59"    Weight (Approx.) 325 kg.    Motor1440 RPM 3 Phase440 volts 1 HP    Shipping Wooden Case  Inner Size LxWxH
       (in mm) 860x460x1880 mm
  • DRILLING MACHINE (AS-160V, AS-160: LABOR SAVING AUTOMATIC AIR-HYDRO MACHINE)
    Product ID: AS-160V, AS-160: Labor Saving Automatic Air-Hydro Machine The drilling machine we offer is an automatic and labor saving equipment. It can be settled in any direction and position to reduce manufacturing cost and what's more, to make the qulaity of your product unique. Besides, the drilling equipment can be assembled with automatic tapping machine for special working projects. The automatic working equipment can be mounted with multiple spindle heads, which can increase the productivity and produce unique whole-screw-threading. The upward milti-spindle tapping and drilling machine can also accomplishes boring and tapping at one station. The whole procedure is easy to understand, from the cycle of start to rapid approaching and working feed, to rapid return and then end up the procedure. With the help of the multiple spindle heads, the efficiency can be increased by 5-10 times. If you are interested in our product, please feel free and contact us today for more details about the drilling machine. We are ready to provide you the quality equipment to assit your business.
    • Address: No.8, Lane 121, Li Teh Road, Taipei

  • DRILLING MACHINES (NILAMANI INDUSTRIES)
    We bring in for our clients Drilling Machines, which is incorporated with a column, bed and saddle. Moreover, our range of Machine is designed to meet the challenging demands of engineering and allied trade operations. Further, our range of machines is highly appreciated for the high operational output and matchless quality. Our drilling machine features are as follows.
    • 30-D, Meldi Estate, Maniprakash Premises, Nr. Meldi Mata Temple, West Coast Road Gota Ahmedabad

  • ALL GEARED PILLAR DRILLING MACHINE (AP - 40)
    SPECIAL FEATURES ::
    Spindle Gear Box :
    The spindle gear box has 8 mechanical speeds from 90 to 885 RPM. The gears are made from steel. The totally enclosed 2 H.P. Motor is direct coupled with gear box. The levers for changing the speed are avoided by means of providing special gear system. The speed can be changed in the running.
    Feed Gear Box :
    The feed gear box has 2 feed, 0.05 7 0.1, for the vertical movement of the Ram.
    Automatic Feed With Auto Stop :
    As the usual hand feed is with the machine, the Automatic feed arraignment is provided. As the feed engagement handles are pulled out automatic feed is engaged.
    Drill Spindle :
    The Drill spindle is made from best quality steel. The taper roller bearing is inserted.
    Drill head & Table Arm :
    Both can be raised, lowered and turned round the columm.
    • 73/B, Jaybharat Rangshala Compound, Opp. E.S.I.C. Dispensary No. 18, Nr. Tirupati Estate, Bapunagar, - . Ahmedabad

  • LABOR SAVING AUTOMATIC HYDRAULIC DRILLING MACHINE (DU13-30V, DU13-30)
    Product ID: DU13-30V, DU13-30 Since manufacturing of manual drilling & tapping macine in 1964, Chen Fwa Industrial Co., Ltd. develops auto-saving drilling machine (air-hydraulic tool feed) through continuous reserch & improvement. These latest items can simplify work, reduce production cost, and make quality unique & efficiency high.
    • Address: No.8, Lane 121, Li Teh Road, Taipei

  • TAPPING MACHINE TM - 12
    Specification    Model No. TM - 12    Tapping Machine Capacity    12 mm.    Drilling Capacity    8 mm.    Spindle Travel/Table travel (6 mm.)    75 mm.    Distance Spindle to Column    140 mm.    Distance between chuck to base    450 mm.    Distance between chuck to work table    380 mm.    Size of base Plate-L x B    480 x 350 mm.    Size of Work Table-L x B    190 x 220 mm.    Diameter of Column    74 mm.    V-Belt (Inside)    inside A-71    V-Belt for Motor (Outside)    A-25    No. of Spindle Speeds    3    Forwards Speeds Range    350/620/1100    Reverse Speeds Range    420/745/1315    Motor Single phase or three phase    0.75/1 H.P.         1440 R.P.M.    Overall Height    1245 mm.    Overall Width    370 mm.    Overall front to back    600 mm.    Weight approx    120 Kg.
  • DRILLING MACHINE
    DRILLING MACHINEWe bring in for our clients Drilling Machines, which is incorporated with a column, bed and saddle. Moreover, our range of Machine is designed to meet the challenging demands of engineering and allied trade operations. Further, our range of machines is highly appreciated for the high operational output and matchless quality. Our drilling machine features are as follows.
    • 30-D, Meldi Estate, Maniprakash Premises, Nr. Meldi Mata Temple, West Coast Road Gota Ahmedabad

  • TAPPING MACHINE TM - 12
    Specification    Model No. TM - 12    Tapping Machine Capacity    12 mm.    Drilling Capacity    8 mm.    Spindle Travel/Table travel (6 mm.)    75 mm.    Distance Spindle to Column    140 mm.    Distance between chuck to base    450 mm.    Distance between chuck to work table    380 mm.    Size of base Plate-L x B    480 x 350 mm.    Size of Work Table-L x B    190 x 220 mm.    Diameter of Column    74 mm.    V-Belt (Inside)    inside A-71    V-Belt for Motor (Outside)    A-25    No. of Spindle Speeds    3    Forwards Speeds Range    350/620/1100    Reverse Speeds Range    420/745/1315    Motor Single phase or three phase    0.75/1 H.P.         1440 R.P.M.    Overall Height    1245 mm.    Overall Width    370 mm.    Overall front to back    600 mm.    Weight approx    120 Kg.
  • 40 MM ALL GEARED WITH AUTO FEED DRILLING MACHINE WITH MODEL 40 P.A.A (SATYA PRAKASH MACHINE TOOLS)
    Specification Pillar Drilling Machine Model No. 40 P.A.A. Drilling Capacity in mild steel 40 No.of spindle speeds - 9 95-1500 Number of auto feed 2 Spindle center to column 316 Max. travel of spindle 250 Max. dist. spindle nose to table 785 Max. dist. spindle nose to base 1150 Spindle nose Bore fitting M.T.4 Diameter of table 545 Diameter of RAM 78 Base area machined 450 * 600 Diameter of column 130 Total height of the Machine 2100 H.P. of the motor 1.5 RPM 960 Net weight 550 Kgs.
    • Satya Prakash Machine Tools Vitthalvadi, Muni, Shed no.3 Near Banjrang das Petrol Pump, Bhavnagar . (India) Bhavnagar

  • BENCH & PILLAR TYPE DRILLING MACHINE - 13 KSR (K.M. PANCHAL & CO)
    13 mm cap., Solid spindle with rack & pinion system,  square table.
    • B-6, Chinaibaug Industrial Estate, Near Dudheshwar Water Tank Dudheshwar