Negara

China (6)

Thailand (4)

India (1)

Indonesia (17)

Netherlands (4)

Taiwan, Province of China (4)

Semua Negara (36)

Kategori Member

Platinum (21)

Free (5)

Semua Kategori Member (26)

Kategori Perusahaan

Manufacturer (15)

Distributor (21)

Semua Kategori (36)

Magnetic Driling Machine

Konten Indikasi Harga belum tersedia

Produk terkait

  • MAGNETIC DRILLING MACHINE ROTABEST 130
    Advantageous : Oil Bath gearbox, reduces wear on the gearbox significantly, even under extreme conditions Mechanical slipping clutch, protects the gearbox from overload and comes into action automatically Membrane keyboard, perfect ergonomics with large keys. The entire keyboard is located in a protected area (even if the machine drops) Soft touch grips, perfect "grip" on the handles, even with oily gloves Cord length 5 m, extension cord and cable drums is not required Metal rings, perfect protection for the magnets against penetration by metallic objects (chips, milling dust, etc)
    • Jl. Pangeran Jayakarta 141 Blok II No. C 4-5 Kota Adm. Jakarta Pusat
    • +62 21 6008460
    • +62 21 6244405

  • MAGNETIC DRILLING MACHINE SMD 502
    Advantageous : The 2-Speed Gearbox allows a wide range of cutters to be used and delivers maximum torque The quick adjustable variable height slide allows a variety of tools to be used. Lower for cutters, raise for twist drills Quick release arbor, make it quick and tool free to change cutter and accessories, integrated with internal cooling Powerful magnetic adhesion Handy sets in new transport case
    • Jl. Pangeran Jayakarta 141 Blok II No. C 4-5 Kota Adm. Jakarta Pusat
    • +62 21 6008460
    • +62 21 6244405

  • MAGNETIC DRILLING MACHINE ROTABEST 60 RL-E, RIGHT LEFT ROTATING
    Advantageous : Full wave control electronics, allow maximum power output from the motor Right/left run, extends the range of application Oil bath gearbox, reduces wear on the gearbox significantly, even under extreme conditions Mechanical slipping clutch, protects the gearbox from overload and comes into action automatically Stepless adjustment, the stroke can be increased continuously Soft touch grips, perfect "grip" on the handles, even with oily gloves Membrane keyboard, perfect ergonomics with large keys, the entire keyboard is located in a protected area (even if the machine drops) Cord length 5 m, extension cord and cable drums is not required Metal rings, perfect protection for the magnets against penetration by metallic objects (chips, milling dust, etc)
    • Jl. Pangeran Jayakarta 141 Blok II No. C 4-5 Kota Adm. Jakarta Pusat
    • +62 21 6008460
    • +62 21 6244405

  • UNIBOR ELECTRO MAGNETIC DRILLING MACHINE
    MAGNETIC DRILLING MACHINE   Powerful new light weight motor unit Integral automatic lubrication system Control with safety interlocks Cuts up to 35mm diameter and 50mm deep High power magnet (600 kg) for maximum stability. Standard Accessories : Carrying case, Allen keys, Safety strap & guard, Cutting Oil.   SPECIFICATIONS : Model E-35N Cutter capacity 12 - 35 mm No load speed 450 rpm Stroke 147 mm Power Consumption 1080 Watt L x H x W 240 x 350 x 150 mm Weight 11.5 Kg           Powerful motor unit with 2 stage gears Integral automatic lubrication system Control with safety interlocks Cuts up to 50mm diameter and 50mm deep High power magnet (910 Kg) for maximum stability. Standard Accessories : 
    Tool holder MT-2, Coolant tank, Carrying case, Allen keys, Safety strap & guard.   SPECIFICATIONS : Model E-50 Cutter capacity 12 - 50 mm Twist drill capacity 23 mm/(MT-2) Speed ranges 280/500 rpm Stroke 123 mm Power Consumption 1150 Watt L x H x W 290 x 458 x 105 mm Weight 18.5 Kg         Powerful motor unit with 2 stage gears and variable speed control Integral automatic lubrication system Control with safety interlocks. Cuts up to 50mm deep with standard tool holder or can be extended up to 110mm with optional tool holder. High power magnet (1800 Kg) for maximum stability Standard Accessories :
    Tool holder MT-3 with 50mm deep, Coolant tank, Carrying case, Allen keys, Safety strap & guard   SPECIFICATIONS : Model E-100 Cutter capacity 12 - 100 mm Twist drill capacity 32 mm/(MT-3) Stroke 280 mm Speed ranges 40-130/145-430 rpm Power Consumption 1850 Watt L x H x W 375 x 505 x 130 mm Weight 26 Kg         Powerful motor unit with 4 stage gears Integral automatic lubrication system Control with safety interlocks Cuts up to 50mm deep with standard tool holder or can be extended up to 110mm with optional tool holder. High power magnet (1800 Kg) for maximum stability. Standard Accessories : 
    Tool holder MT-3 with 50mm deep, Coolant tank, Carrying case, Allen keys, Safety strap & guard.   SPECIFICATIONS : Model A-100 Cutter capacity 12-100 mm Twist drill capacity 32 mm / (MT-3) Stroke 280 mm Speed ranges 220/260/ 350/420 rpm Power Consumption 1200 Watt L x H x W 320x500x135 mm Weight 25 Kg  
    • Komp. Ruko Harmoni Mas Blok D No. 45, Jl. Terusan Bandengan Utara Kota Adm. Jakarta Utara
    • +62 21 6604409
    • +62 21 6626768

  • MAGNETIC DRILLING MACHINE ROTABEST 100 RL-E, RIGHT LEFT ROTATING
    Advantageous : Full wave control electronics, allow maximum power output from the motor Right/left run, extends the range of application Oil bath gearbox, reduces wear on the gearbox significantly, even under extreme conditions Mechanical slipping clutch, protects the gearbox from overload and comes into action automatically Stepless adjustment, the stroke can be increased continuously Soft touch grips, perfect "grip" on the handles, even with oily gloves Membrane keyboard, perfect ergonomics with large keys, the entire keyboard is located in a protected area (even if the machine drops) Cord length 5 m, extension cord and cable drums is not required Metal rings, perfect protection for the magnets against penetration by metallic objects (chips, milling dust, etc)
    • Jl. Pangeran Jayakarta 141 Blok II No. C 4-5 Kota Adm. Jakarta Pusat
    • +62 21 6008460
    • +62 21 6244405

  • MAGNETIC DRILLING MACHINE MD 300 N SEMI AUTO
    Advantageous : It feeds forward automatically with special circuitry to adjust the feed rate to the ideal speed for the most efficient possible drilling It still has full manual capability up to Ø 35 mm Strong torque in drilling Powerful magnetic adhesion Support bracket with needle bearing for spindle stability 3 points fixing from motor to stand for maximum stability Tool holder with integrated internal cooling Crank handle can be reversed   Handy sets in new transport case
    • Jl. Pangeran Jayakarta 141 Blok II No. C 4-5 Kota Adm. Jakarta Pusat
    • +62 21 6008460
    • +62 21 6244405

    • Jl. Pakin No. 2 A-B Kota Adm. Jakarta Utara
    • 62216696061
    • 62216682176

  • MAGNETIC DRILLING MACHINE ROTABEST RB 80 X
    Advantageous : Smooth start, minimize wear of motor, gearbox and electronics Hybrid relays, drastically reduces contact burning on the relays, the life of the switching elements is significantly increased, voltage fluctuations are reduced by approx. 10% Oil bath gearbox, reduces wear on the gearbox significantly, even under extreme conditions Mechanical slipping clutch, Protects the gearbox from overload and comes into action automatically Stepless adjustment, the stroke can be increased continuously Self adjusting guides, self locking comes into action automatically for perfect guiding Membrane keyboard, perfect ergonomics with large keys, the entire keyboard is located in a protected area (even if the machine drops) Soft touch grips, perfect "grip" on the handles, even with oily gloves Holder for allen key, integrated allen key holder, no searching for the key Cord length 5 m, extension cord and cable drums is not required LED Sensor, various LED displays on states of switching protect you and your machine Metal rings, perfect protection for the magnets against penetration by metallic objects (chips, milling dust, etc) Performance and weight optimization, weight, dimensioning and coil sizing are ideally matched, this maximize the Tool Force (TM)
    • Jl. Pangeran Jayakarta 141 Blok II No. C 4-5 Kota Adm. Jakarta Pusat
    • +62 21 6008460
    • +62 21 6244405

  • MAGNETIC DRILLING MACHINE ROTABEST V32
    Advantageous : Horizontal metal core drilling machine for the tightest conditions. Perfect for use where regular metal core drilling machines cannot go due to their height Application areas : Steel construction (in between girder flanges), vehicle construction (truck frames), bridge construction, tower construction, tunnel construction, tersely everywhere, where it´s narrow Magnet foot components from the Rotabest series. The total height is just 227 mm and can even be reduced to 185 mm by removing the handle The spur gear unit is designed for robust use and is fed using a ratchet leveler. Reversible for right- and left-handed operation Equipped with 2 sided pillar guidance Another advantage : the design of the angled gear unit ensures permanent lubrication and prevents dry running Used with the proven motors and magnet foot components from the Rotabest series Cord length 5 m, extension cord and cable drums is not required Metal rings, perfect protection for the magnets against penetration by metallic objects (chips, milling dust, etc) Performance and weight optimization, weight, dimensioning and coil sizing are ideally matched
    • Jl. Pangeran Jayakarta 141 Blok II No. C 4-5 Kota Adm. Jakarta Pusat
    • +62 21 6008460
    • +62 21 6244405

  • ECO-TUBE.30 TUBE MAGNETIC CORE DRILLING MACHINE
    The TUBE.30 with patented shallow-field magnetic technology that offers incredibly strong grip, even on steel as thin as 3 mm. The patent-pending base automatically pivots to conform to any pipe Ø 75 mm or larger. The magnets do not require electricity, so all the power goes to the motor. This also offers increased safety as the tool will not release from the target material in the event of an unintentional power loss. With its 900W power the TUBE.30 cuts holes between Ø 12 and 30 mm easily and quickly. • No electricity required for magnetic base • Unique flexible features for pipes of various sizes • Two separate magnets which allows the machine to swing away for hole inspection & debris removal without losing position • No special attachments needed to accommodate flat or curved surfaces • Highly stable wide stance • Direct spindle drive • Easy to handle
    • 161/33 Moo 1,Plutaluang Sattahip
    • +66 38 110789
    • +66 33 132800

  • IKURA - LIGHT BORER MACHINE
    features ~ The most light weight magnetic drill in the world, only 8,9 Kg ~ Low height body (223 mm), it is designed to drill in the most restricted area ~ Swivel and backward - forward head for utmost flexibility positioning ~ Handle can be freely operated and attached to the right or left side ~ LED light enables easy positioning of drilling and center pin in confined space
    • Komp. Ruko Harmoni Mas Blok D No. 45, Jl. Terusan Bandengan Utara Kota Adm. Jakarta Utara
    • +62 21 6604409
    • +62 21 6626768

  • DRILLING MACHINE EHB 32/4.2
    Advantageous : Strong torque and lighter weight among others in its class Equipped with four gears RPM, for a wide range of applications Safety clutch system, which will prolong the life of armature and drill bits Protective double insulation and radio interference Complies with VDE and CEE regulation
    • Jl. Pangeran Jayakarta 141 Blok II No. C 4-5 Kota Adm. Jakarta Pusat
    • +62 21 6008460
    • +62 21 6244405

  • MAGNETIC DRILLING MACHINE SMD 352
    Advantageous : The 2-Speed Gearbox allows a wide range of cutters to be used and delivers maximum torque The quick adjustable variable height slide allows a variety of tools to be used. Lower for cutters, raise for twist drills Quick release arbor, make it quick and tool free to change cutter and accessories, integrated with internal cooling Powerful magnetic adhesion Handy sets in new transport case
    • Jl. Pangeran Jayakarta 141 Blok II No. C 4-5 Kota Adm. Jakarta Pusat
    • +62 21 6008460
    • +62 21 6244405

  • ECO.100 /4 & ECO.100/4D MAGNETIC DRILLING MACHINE
    Our showpiece has been provided with every option you may think of: an unprecedentedly powerful motor, state-of-the-art electrically and mechanically adjustable torque and rotational speed settings. The ECO.100/4 not only has a new 4-speed gear box, the transport case too has been improved ergonomically and is changed into a trolley.
    • 161/33 Moo 1,Plutaluang Sattahip
    • +66 38 110789
    • +66 33 132800

  • MAGNETIC DRILLING MACHINE ROTABEST RB 50 X
    Advantageous : Smooth start, minimize wear of motor, gearbox and electronics Hybrid relays, drastically reduces contact burning on the relays, the life of the switching elements is significantly increased, voltage fluctuations are reduced by approx. 10% Oil bath gearbox, reduces wear on the gearbox significantly, even under extreme conditions. Stepless adjustment, the stroke can be increased continuously Self adjusting guides, self locking comes into action automatically for perfect guiding Membrane keyboard, perfect ergonomics with large keys, the entire keyboard is located in a protected area (even if the machine drops) Soft touch grips, perfect "grip" on the handles, even with oily gloves Holder for allen key, integrated allen key holder, no searching for the key Cord length 5 m, extension cord and cable drums is not required LED Sensor, various LED displays on states of switching protect you and your machine Metal rings, perfect protection for the magnets against penetration by metallic objects (chips, milling dust, etc) Performance and weight optimization, weight, dimensioning and coil sizing are ideally matched, this maximize the Tool Force (TM)
    • Jl. Pangeran Jayakarta 141 Blok II No. C 4-5 Kota Adm. Jakarta Pusat
    • +62 21 6008460
    • +62 21 6244405

  • ECO.32 MAGNETIC DRILLING MACHINE
    The ECO.32 has been the best selling magnetic drilling machine in recent years. The efficient basic model has been provided with an eager single speed 1000 W motor. At no more than 12 kg the ECO.32 is one of the lightest and compact magnetic drilling machine in the ECO series.
    • 161/33 Moo 1,Plutaluang Sattahip
    • +66 38 110789
    • +66 33 132800

  • MAGNETIC DRILLING MACHINE ROTABEST 35 SP
    Advantageous : Powerful Motors 1.100 W, ergonomic design, perfect technology Continuously adjustable motor on the slide for a maximum stroke enlargement, when using twist drills and drill chucks Newly designed gear - housing with integrated motor support Patented P - Line Design Trouble with ordinary dovetail or pillar guides ? Solid brass guide rails guarantee an optimum slide guidance Optimized Tool Force (Comes into effect just below the cutter) Material thickness from 3 - 4 mm
    • Jl. Pangeran Jayakarta 141 Blok II No. C 4-5 Kota Adm. Jakarta Pusat
    • +62 21 6008460
    • +62 21 6244405

  • MAGNETIC DRILLING MACHINE ROTABEST RB 35 X
    Advantageous : Smooth start, minimize wear of motor, gearbox and electronics Hybrid relays, drastically reduces contact burning on the relays, the life of the switching elements is significantly increased, voltage fluctuations are reduced by approx. 10% Self adjusting guides, self locking comes into action automatically for perfect guiding Soft touch grips, perfect "grip" on the handles, even with oily gloves Membrane keyboard, perfect ergonomics with large keys, the entire keyboard is located in a protected area (even if the machine drops) Holder for allen key, integrated allen key holder, no searching for the key Cord length 5 m, extension cord and cable drums mostly not required LED Sensor, various LED displays on states of switching protect you and your machine Metal rings, perfect protection for the magnets against penetration by metallic objects (chips, milling dust, etc) Performance and weight optimization, weight, dimensioning and coil sizing are ideally matched, this maximize the Tool Force (TM)
    • Jl. Pangeran Jayakarta 141 Blok II No. C 4-5 Kota Adm. Jakarta Pusat
    • +62 21 6008460
    • +62 21 6244405

  • WIN SPEED MAGNETIC CORE DRILL MACHINE
    Type WS-3500M WS-4500M WS-6000M Magnetic Core Drill Machine SPECIFICATIONS : Model WS-3500M Voltage (Single Phase) 220 ~ 240V AC 50 / 60 Hz Motor Power Consumption 1100 W No-load Speed 780 rpm Height for max. stroke 100 mm Coolant Supply Via Tool Holder Magnet Power Consumption 38 W Magnet Adhesion 7350 N / 750 kgf Magnet Dimensions 186 mm x 80 mm x 58 mm Weight 14 kg T.C.T. Broach Cutter Hole Diameter Plate Thickness 14-35 mm 9-50 mm Twist Drill 1-13 mm Designed to use T.C.T. Broach Cutter. Cuts up to diameter 35 mm and 50 mm deep. Serves as two types of drilling that allows loading in a “Broach Cutter” or change with drill chuck for loading “Twist Drill or Hole Saw”. Bearing Bracket aligns cutters precisely, which increases cutter and motor life. Also utilized with roller bearing for increase main shaft stability and avoid motor and shaft sway easily. The roller bearing design that lowers down damage. The cutter no needs to change many times and save the cost also increase cutter life. Designed with double coil magnetic base when has power the in front of coil will start. This design is for adjust to point the accuracy position on work sheet. When any one coil burning that still keeps another and avoid danger. It’s high safety. Designed with electronic switch that can adjust an electric current and keep the voltage. The stability will higher than traditional switch. Light weight, only 14 Kg. Magnetic Core Drill Machine SPECIFICATIONS : Model WS-4500M Voltage (Single Phase) 220 ~ 240V AC 50 / 60 Hz Motor Power Consumption 1850 W No-load Speed 650 ~ 720 rpm Tool Adaptor Inner Diameter 19 mm Adjustable in height for max. stroke 100 mm Magnet Power Consumption via Tool Holder Magnet Adhesion 38 W Magnet Dimensions 188 mm x 86 mm x 56 mm Weight 15 kg T.C.T. Broach Cutter Hole Diameter Plate Thickness 18-45 mm 9-50 mm Twist Drill 1-13 mm Designed to use T.C.T. Broach Cutter. Cuts up to diameter 45 mm and 50 mm deep. Serves as two types of drilling that allows loading in a “Broach Cutter” or change with drill chuck for loading “Twist Drill or Hole Saw”. Bearing Bracket aligns cutters precisely, which increases cutter and motor life. Also utilized with roller bearing for increase main shaft stability and avoid motor and shaft sway easily. The roller bearing design that lowers down damage. The cutter no needs to change many times and save the cost also increase cutter life. Designed with double coil magnetic base when has power the in front of coil will start. This design is for adjust to point the accuracy position on work sheet. When any one coil burning that still keeps another and avoid danger. It’s high safety. Designed with electronic switch that can adjust an electric current and keep the voltage. The stability will higher than traditional switch. Light weight, only 15 Kg. Magnetic Core Drill Machine SPECIFICATIONS : Model WS-6000M Voltage (Single Phase) 220 ~ 240V AC 50 / 60 Hz Motor Power Consumption 1850 W No-load Speed 750 rpm Dia. 13 mm~35 mm 450 rpm Dia. 36 mm~60 mm Tool Adaptor Inner Diameter 19.05 mm Height for max. stroke 135 mm Coolant Supply Via Tool Holder Magnet Power Consumption 85 W Magnet Adhesion 22540 N / 2300 kgf Magnet Dimensions 210mm x 100mm x 64mm Weight 23 kg Hole-Cutting Capacity T.C.T. Broach Cutter Hole Diameter Plate Thickness 18-60 mm 6-75 mm Twist Drill Max. Dia 16 mm
    • Komp. Ruko Harmoni Mas Blok D No. 45, Jl. Terusan Bandengan Utara Kota Adm. Jakarta Utara
    • +62 21 6604409
    • +62 21 6626768

  • MAGNETIC DRILLING MACHINE MASTER 100/4
    Advantageous : New design and robust Equipped with a new Guide Rail for a better stability New improved printed circuit board / PCB Membrane keyboard, protection against dirt, oil, etc Strong torque in drilling Fully ball bearing and Safety Clutch Protective insulation and radio interference suppressed Complies with VDE and CEE regulations
    • Jl. Pangeran Jayakarta 141 Blok II No. C 4-5 Kota Adm. Jakarta Pusat
    • +62 21 6008460
    • +62 21 6244405