Negara

Turkey (7)

Germany (1)

Iran, Islamic Republic of (1)

Spain (1)

Netherlands (1)

Taiwan, Province of China (1)

China (36)

Australia (5)

Slovakia (1)

(6)

Italy (14)

New Zealand (1)

USA (3)

Korea, Republic of (4)

Semua Negara (82)

Kategori Member

Platinum (27)

Free (17)

Semua Kategori Member (44)

Kategori Perusahaan

Manufacturer (77)

Supplier (5)

Semua Kategori (82)

Plate Driling Machine

Konten Indikasi Harga belum tersedia

Produk terkait

  • PLATE MARKING
    P 27E is a drilling machine specifically designed for automatic drilling of plates up to 80 mm thickness. Traditional systems such as drilling machines, portable manual drilling machines, etc. have been overcome by this high speed drilling machine which not only carries out the drilling operation, but can also mark, thread and scribe the plates to mark possible welding layout positions (scribing). The drilling machine is made up of: • Rigid and sturdy electrowelded plate frame • High speed Ballscrew controlled drilling head (Direct Drive) • 19 (27) kw power spindle • Automatic tool changing device with 8 positions • Coordinate table for automatic movement of 1000mm x 1250mm plates, with possibility to reposition and move using ball screw drives over a roller ball table • Ficep Pegaso series CNC The drilling machine is conceived both for field programming and connection to higher level host computers.
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123
  • HIGH-SPEED CNC GANTRY MOVABLE DRILLING MACHINE FOR METAL PLATES MODEL TPM2020-1
    Applicable Industry: Mainly used for drilling tube plate, clapboard, flange and large plate in petrochemical, boiler, wind power, flange industries and also for connection plates in building, bridge, iron tower industries. Product feature:
    1. The lathe consists of lathe bed, work table, gantry, slide carriage, power head, CNC system, cooling chips discharge system etc. 2. The lathe works in mode of lathe bed and gantry being fixed and work table moving. 3. The lathe bed and gantry are weld assembly, work table is iron casting, which was high temperature annealed before processing, was annealed again after half finished machining to remove stress, then finished machining so that ensure stable precision. 4. The lathe has 3 numeric control axes; a heavy linear guide is equipped on the lathe bed. The work table can make longitudinal movement along the guide(X axis), the gantry cross beam has a linear guide too; the slide carriage can make lateral movement along the guide (Y axis). Sliders are equipped on the slide carriage, a guide on power head which can make vertical movement on the slide carriage. 5. The power head spindle is precision spindle of Taiwan KENTURN / Taiwan Xutai, which is driven by special frequency conversion motor and can make stepless speed regulation according to needs. The spindle is BT50 taper hole. The drilling head, reamer or milling cutter can be installed by splice bar. The spindle box has a loose cutter cylinder (air and hydraulic pressure) for easily changing cutters. It also can equip with cutter inter-cooled splice bar to realize high speed cutting. 6. The chip cleaner equipped at the back of work table can discharge chips automatically. The lathe use water cooling with the system of cooling liquid providing, recycling, circulating and filtrating. 7. Numerical control uses FAGOR8055 system, with RS232 connector and color LED panel, Chinese interface. It can make spot / external PC workpiece input and be easily operated. 8. Protective covers are equipped for X/Y axis guides and lead screw of the lathe. Iron sheet cover is for X axis, and organ-protective cover for Y axis. 9. For ensuring the reliability of the lathe, the key components use high quality imported products. See the main spare parts list for details.   Specifications: Parameter Name Item Specifications Max. size L X W 2000X2000mm Max thickness   250mm Work table Width of T slot 28/500mm Vertical slide type drill head Quantity 1 Main spindle taper hole BT50 Max drill diameter(common carbon steel) φ40mm(carbide drill) φ50mm(HSS twist drill) Main spindle speed 30—2400r/min Motor power of spindle 22/33kW Distance between spindle tip to work table 300-800mm (X axis) Gantry longitudinal move   Max. stroke 2000mm Moving speed of X axis 0-8m/min Servo motor power of X axis/torque 2X3kW/28.4Nm (Y axis) Power head transversal move   Max stroke 2000mm Moving speed of Y axis 0-8m/min Servo motor power of Y axis/torque 2x3kW/28.4Nm (Z axis) Vertical slider feeding Stroke of Z axis 500mm Feeding speed of Z axis 0-5m/min Servo motor power of Z axis/torque 3kW/28.4Nm Positioning accuracy X/Y axis ≤0.1mm/ Full length Repositioning accuracy X/Y axis ≤0.05mm Hydraulic system Hydraulic pump pressure/flow rate 6.5MPa /25L/min Hydraulic pump motor power 3kW Pneumatic system Compressed air pressure ≥0.4MPa Chip cleaning and cooling  Chip cleaner type Plate chain type Chip cleaner no. 2 Chip cleaning speed 1m/min Chip cleaner motor power 0.75kW Motor power of inner cooling water pump 3kW Motor power of Outer  cooling water pump 0.75kW Automatic lubricating system Lubrication pressure 2MPa Lubrication point oil injecting amount 0.1mL Lubrication period 6-10min Electric system CNC system FAGOR8055 CNC axis NO. 4 Tool change system   5 tools Whole power of motors   Approx. 48kW Overall size LxWxH Approx. 5800X5800X3600mm Weight Approx. 28t
    • No.8299,Jingshi Road Jinan
    • 8653155611277
    • 8653155611266
  • MAG B PLASMA CUTTING, DRILLING, PUNCHING, STAMPING, MACHINING & AUTOMATIC MATERIAL HANDLING ( SPECIALIST MACHINERY SALES )
    Vernet Behringer (France) plate drilling, punching, plasma & oxy cutting, stamping
    • - Sidney
    • 61 08 61605963
    • +61 08 61605963
  • GANTRY MOVEABLE CNC DRILLING MACHINE FOR PLATES MODEL TPD2016
    Applicable Industry: It is used to drilling holes on the metal plate of building steel structure, power iron tower and petrochemical equipments.

    Specifications: Name Specifications machine type Gantry moveable single spindle CNC drilling machine Max work piece size (LxW) 2000x1600mm(1 piece) 1000x1600mm(2 pieces) 500x800mm(4 pieces) If work piece is small size, it can be overlapped and processed at the same time. Thickness of work piece 5~100mm Height from table top to ground 800mm Drill unit type sliding table, servo control Clamp type Hydraulic clamp with 12 clamps Drill head quantity 1 Max drill diameter Φ50mm Power of main motor 5.5 kW Spindle speed 120~560r/min (frequency control) Spindle vertical stoke (Z axis) 350mm Drive mode of gantry longitudinal (X axis) Guided by linear rolling guide; driven by AC servo motor and ball screw pairs. Servo motor power of X axis 1.3 kW Power head lateral driving type (Y axis) Guided by linear rolling guide; driven by AC servo motor and ball screw pairs. Servo motor power of Y axis 1. 3 kW Servo motor power of Z axis 0.85 kW Motor power of chip cleaner 0.4 kW Motor power of cooling system 0.25 kW Motor power of Hydraulic station 2.2 kW Clamping type Attach Morse 4# quick chuck and 3#, 2# reducing sleeve Electric control cabinet With dustproof ventilating device and LENOVO computer Electric control type MISTUBISHI PLC CNC axis quantity 3 With function of CAD/CAM automatic generation with function of hole site memory (memory hole site if power off suddenly) and drill pause Total power ≈13 kW Total weight ≈7.2 t Overall dimension 3990×2521×2780
    • No.8299,Jingshi Road Jinan
    • 8653155611277
    • 8653155611266
  • PLASMA CUTTING MACHINE
    Overview The Ficep Gemini is the complete plate working solution for fabricators and manufacturers of all sizes. The inbuilt flexibility of the Gemini concept means that you only buy the machine you need. Gemini will give you the lowest cost due to its maximum flexibility, high productivity and minimal floor space. The focus of the Gemini design is to provide the shortest floor to floor times for your standard work with lowest cost tooling and flexibility for the occasional and unusual. The Gemini handles from light to heavy plate for thermal cutting, marking, milling, drilling, tapping, beveling and more all on one system with unprecedented accuracy. Cutting Supplied with plasma and optional oxy-fuel torches, depending on the model the Gemini can cut plates from 1/8” (3 mm) to 12” (305 mm) in steel and from 1/8” (3 mm) to 1-1/2” (40 mm) in stainless, brass and aluminum. Machine repeatability of .004” (.1 mm) ensures quality parts for better fit up and less welding time. For heavy plate work, the Gemini can be supplied with up to three oxy-fuel torches for accurate stripping or multiple part cutting. The HD and XD Geminis can also be fitted with two plasma or oxy-fuel bevel heads or one of each. Beveling The Gemini can make weld preps either by milling, plasma or oxy beveling. For precision bevels, milling is more accurate and for small internal bevels is often faster. In some cases the mechanical beveling on the Gemini can eliminate the need for plasma beveling. A big advantage of machining is that tapering for but welds of different thicknesses and J groove bevels can also be produced. Where applicable J preps can halve the welding time compared to conventional Y or K preparation For variable bevels, large parts and K preps, plasma beveling is the most economical process and the Gemini bevel head is one of the most flexible available. For heavy plate work auto- rotating triple oxy heads are available Marking and scribing The Gemini can be furnished with a wide variety of marking devices depending on your needs. Fabrication and bending lines can be indicated with a scribing tool, plasma or flame powder marking. Identification marks and part numbers for fabrication can be added with the scribing tool, plasma marker or a pin marker. Deeper marking suitable for viewing after painting or galvanizing can be performed with a scribing tool . Locations for the positioning and welding of parts with reference points are produced with the scribing tool. You can even scribe the part number of the matching part so that the component becomes it's own traveling assembly instruction. In many cases for large fabrications the savings in time and errors from marking out on the machine are so large that they can pay for the machine even without cutting and machining savings. Drilling and Tapping The precision of the Gemini provides unprecedented accuracy of both hole to hole and hole to edge locations. The high speed positioning with wide area clamping provides very high productivity. For larger holes the Gemini's helical milling and thread milling capabilities provide superior hole quality at vastly reduced tooling cost compared to standard drilling techniques. This can even be done even in 500 Br. material if needed. Gemini can mill holes with exceptional accuracy (<0.004” (.1 mm) tolerance on diameter and concentricity. For many applications, tapped or shaped holes in the components can reduce welding, fitting and assembly time. Special holes for coach bolts, plow bolts and blade bolts can also be produced in one setup. This is especially useful in mining and earth-moving equipment. For tapping, the digital control system provides high quality threads on tapped holes as small as 1/8” (3 mm) for cable clips, etc. and up to 15/16” (22 mm) for structural bolts. In hard materials or holes up to 350 diameter thread milling is a very simple way of producing high quality threads with low tooling costs. Surface and slot milling On machine parts and many structural detail items, slotted holes, milled bearing or mating surfaces, etc. are required. The accuracy of the Gemini in both cutting and machining means that many of these operations can be performed on the stock plate, thus eliminating the expense, handling cost, floor space and lead-time of secondary operations. For fabrication the milling of weld prep surfaces can drastically reduce welding costs. For example milling the profile of a column into a base plate can reduce welding time by 75% because you can guarantee full contact from the column to the base plate. For seal surfaces for example on flame proof cabinets not only can we guarantee a flat seal mounting surface but if necessary an O-ring groove can be machined into the surface. A unique capacity of the Gemini is precision tab and slot preparation. Often tab and slot assembly is difficult to work with plasma cut slots because the tolerance on the slot needs to be so large that the accuracy of the assembly is compromised. A milled slot can be made to exactly fit the tab so assembly fit-up is much tighter therefore dimensional accuracy of the final assembly is much higher.
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123
  • CNC DRILLING MACHINE FOR METAL PLATES MODEL TPD3016
    Applicable Industry: It is used to drilling holes on the metal plate of building steel structure, power iron tower and petrochemical equipments.

    Specifications: Name Specifications Max work piece size (W×L) 1 piece: 3000X1600mm plate  2 pieces:1600 X1500mm plate 4 pieces:1500 X800mm plate Thickness of work piece 5--100mm Morse taper hole of drill chuck #4 (attached with #1, #2, #3 reducing sleeve) Drill unit type sliding table, servo control Drill head quantity 1 Max drill diameter 12- 50mm Power of main motor 5.5 kW Spindle speed 120~560r/min (frequency control) Spindle vertical stoke (Z axis) 350mm Champs number 12 Champing force(kN) 7.5kN Drive mode of gantry longitudinal (X axis) Guided by linear rolling guide; driven by AC servo motor and ball screw pairs. Servo motor power of X axis 1.3 kW Power head lateral driving type (Y axis) Guided by linear rolling guide; driven by AC servo motor and ball screw pairs. Servo motor power of Y axis 1.3 kW Servo motor power of Z axis 0.85 kW Motor power of chip cleaner 0.4 kW Motor power of cooling system 0.45 kW Hydraulic system power 3.7 kW Coolant volume 100L Hydraulic clamping pressure 6Mpa (60kgf/cm2) Hydraulic feeding pressure 2Mpa (20kgf/cm2) Air pressure 0.6Mpa (6kgf/cm2) Clamping type Attach Morse 4# quick chuck and 3#, 2# reducing sleeve Electric control cabinet With dustproof ventilating device and LENOVO computer Electric control type MISTUBISHI PLC CNC axis quantity 3 With function of CAD/CAM automatic generation With function of hole site memory (memory hole site if power off suddenly) and drill pause Total power ≈11kW Total weight ≈8.5 t Overall dimension (L *W *H)mm 7490×4460×2790
    • No.8299,Jingshi Road Jinan
    • 8653155611277
    • 8653155611266
  • FICEP AUTOMATIC CNC COMBINED PLATE PROCESSING LINE, GANTRY TYPE, (WITH DRILLING, MILLING, TAPPING, COUNTERSINKING, SCRIBING, CUTTING WITH BEVEL FUNCTION PLASMA AND OXY GAS TORCH)
    Overview The Ficep Gemini is the complete plate working solution for fabricators and manufacturers of all sizes. The inbuilt flexibility of the Gemini concept means that you only buy the machine you need. Gemini will give you the lowest cost due to its maximum flexibility, high productivity and minimal floor space. The focus of the Gemini design is to provide the shortest floor to floor times for your standard work with lowest cost tooling and flexibility for the occasional and unusual. The Gemini handles from light to heavy plate for thermal cutting, marking, milling, drilling, tapping, beveling and more all on one system with unprecedented accuracy. Cutting Supplied with plasma and optional oxy-fuel torches, depending on the model the Gemini can cut plates from 1/8” (3 mm) to 12” (305 mm) in steel and from 1/8” (3 mm) to 1-1/2” (40 mm) in stainless, brass and aluminum. Machine repeatability of .004” (.1 mm) ensures quality parts for better fit up and less welding time. For heavy plate work, the Gemini can be supplied with up to three oxy-fuel torches for accurate stripping or multiple part cutting. The HD and XD Geminis can also be fitted with two plasma or oxy-fuel bevel heads or one of each. Beveling The Gemini can make weld preps either by milling, plasma or oxy beveling. For precision bevels, milling is more accurate and for small internal bevels is often faster. In some cases the mechanical beveling on the Gemini can eliminate the need for plasma beveling. A big advantage of machining is that tapering for but welds of different thicknesses and J groove bevels can also be produced. Where applicable J preps can halve the welding time compared to conventional Y or K preparation For variable bevels, large parts and K preps, plasma beveling is the most economical process and the Gemini bevel head is one of the most flexible available. For heavy plate work auto- rotating triple oxy heads are available Marking and scribing The Gemini can be furnished with a wide variety of marking devices depending on your needs. Fabrication and bending lines can be indicated with a scribing tool, plasma or flame powder marking. Identification marks and part numbers for fabrication can be added with the scribing tool, plasma marker or a pin marker. Deeper marking suitable for viewing after painting or galvanizing can be performed with a scribing tool . Locations for the positioning and welding of parts with reference points are produced with the scribing tool. You can even scribe the part number of the matching part so that the component becomes it's own traveling assembly instruction. In many cases for large fabrications the savings in time and errors from marking out on the machine are so large that they can pay for the machine even without cutting and machining savings. Drilling and Tapping The precision of the Gemini provides unprecedented accuracy of both hole to hole and hole to edge locations. The high speed positioning with wide area clamping provides very high productivity. For larger holes the Gemini's helical milling and thread milling capabilities provide superior hole quality at vastly reduced tooling cost compared to standard drilling techniques. This can even be done even in 500 Br. material if needed. Gemini can mill holes with exceptional accuracy (<0.004” (.1 mm) tolerance on diameter and concentricity. For many applications, tapped or shaped holes in the components can reduce welding, fitting and assembly time. Special holes for coach bolts, plow bolts and blade bolts can also be produced in one setup. This is especially useful in mining and earth-moving equipment. For tapping, the digital control system provides high quality threads on tapped holes as small as 1/8” (3 mm) for cable clips, etc. and up to 15/16” (22 mm) for structural bolts. In hard materials or holes up to 350 diameter thread milling is a very simple way of producing high quality threads with low tooling costs. Surface and slot milling On machine parts and many structural detail items, slotted holes, milled bearing or mating surfaces, etc. are required. The accuracy of the Gemini in both cutting and machining means that many of these operations can be performed on the stock plate, thus eliminating the expense, handling cost, floor space and lead-time of secondary operations. For fabrication the milling of weld prep surfaces can drastically reduce welding costs. For example milling the profile of a column into a base plate can reduce welding time by 75% because you can guarantee full contact from the column to the base plate. For seal surfaces for example on flame proof cabinets not only can we guarantee a flat seal mounting surface but if necessary an O-ring groove can be machined into the surface. A unique capacity of the Gemini is precision tab and slot preparation. Often tab and slot assembly is difficult to work with plasma cut slots because the tolerance on the slot needs to be so large that the accuracy of the assembly is compromised. A milled slot can be made to exactly fit the tab so assembly fit-up is much tighter therefore dimensional accuracy of the final assembly is much higher.
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123
  • PCS BHB - PLASMA CUTTING MACHINE WITH DRILLING AND EXTRA MACHINING CAPACITY ( SPECIALIST MACHINERY SALES )
    Australia’s No Plate Drilling machine with plasma/oxy cutting and extra machining capacity. - Drill 25mm diameter in 25mm thick plate in 3 seconds.
    • - Sidney
    • 61 08 61605963
    • +61 08 61605963
  • PCS HD - HEAVY DUTY CNC PLASMA AND OXY FUEL CUTTING MACHINE
      Australia’s No1 plate drilling machine with plasma/oxy cutting for all fabrication parts
    • - Sidney
    • 61 08 61605963
    • +61 08 61605963