Negara

China (10)

Turkey (8)

Germany (10)

United States (6)

Japan (5)

Taiwan (3)

Semua Negara (42)

Kategori Perusahaan

Manufacturer (41)

Distributor (1)

Semua Kategori (42)

Mesin Tekuk Besi Pipa

Konten Indikasi Harga belum tersedia

Produk terkait

  • PIPE BENDING KS75NC
    KS75NC high-speed single-head hydraulic bending machine, the use of NC control, multi-group program, multi-angle setting, so your simple side.
  • SR -BENDING MACHINES FOR PLANT CONSTRUCTION, SHIPBUILDING AND OFFSHORE INDUSTRY
    Mandrel bending machine: Particularly economical and easy to use The semi-automatic mandrel bending machines of the SR line permit the especially economical manufacturing of small lines and single bends. Equipped with special tools, these machines bend thin and thick-walled tubes with a maximum diameter of 419 x 21.4 mm. The SR machine line guarantees optimum bending results and is the cost efficient alternative to our CNC machines. Similarly, the SR machines impress with their easy-to-use, intuitive operation. This is because instructions are entered via touch-screen and bend angle corrections are taken into account immediately.
  • CHAINLESS CNC TUBE BENDER: MODEL TMS-30ND
    Maximum tube diameters: φ31.8 × t1.5 (Thin-walled steel tube STKMl1A)
    φ25.4 × tO.8 (Stainless steel SUS304)
    φ32 × t2.0 (Non-ferrous metals, copper, aluminum A-3003 material)
    Maximum radii that can be bent: 100R
    Machine pitch time: About 3 seconds/bending operation on the average 
    * Best-suited for bending processing of tubes for furniture, seat frames, home electric and electronic appliances and a variety of tubing pieces
    • 92-1 Matsuba, Takaoka Toyota

  • PIPE BENDING MACHINE
    The CDW24 series section bending machine is an arc three roller bending machine, with the pre-bend function of section, while biggest advantage of this machine is good precision and high efficiency of section-bending.Characteristics and Features of CDW24 Series Section Bending Machine Our section bending machine is a high efficient processing equipment dedicated to bending on angle steel, channel steel, I-beam steel, flat bar, square steel, round steel and other iregular steel, where edge coiling and round calibration process can be accomplished through one-time feeding, in addition to extensive application in petroleum, chemical, water & electricity, shipbuilding and machinery manufacturing industries. In CDW24 series section bending machine, either2 lower rollers or 3 operational rollers serve as main driver, with the other 2 side roller elevate up and down along arch rail fixed on rotation center, with roller carrying device on the both sides, to ensure rolling quality of asymmetric section. Featuring advanced structure, reliable operation, small size, this full-fledged CDW24 series section bending machine is one of the state-of-the-art section forming equipments in both home and abroad so far. With optional universal or special molds, this machine delivers easy operation, high efficiency and great satisfaction to users.
  • PIPE BENDING MACHINE
    NAME: Single-Head Hydraulic Pipe-Bending Machine MODEL: DW18NC/DW38NC To introduce: High-performance medium-sized pipe-bending machine with NC control, multi-groups of programs and multi-angle settings make your operation and program setting simpler, widely used in mass production and standardized products, such as: blast pipe, seat, fender-guard and all the steel-pipe furniture, etc.
    • 17/F. NO. 31 GAOXIN ROAD, XI'AN City

  • CNC HD
    CNC HD tube cold bending machine: particularly solid and efficient tube bending machine The CNC mandrel bending machines of our Heavy Duty line are the all-rounders of our range: Unlike the semi-automatic SR machine, the tube is clamped into the index head with the automatic CNC machines and positioned in the space using the transport unit and index head. After the first bend, it is immediately moved along and twisted if required. This swiftly produces 3D tube systems without a single welding seam. The basis for the development and manufacture of this machine which is tailored to your demands is a very stable basic machine with extremely high rigidity. It is designed to absorb the enormous bending forces exerted on it. Thanks to the enormous power reserves in its clamping functions, it is able to provide you with outstanding bending results.
  • ABM 76 CNC-1 TUBE BENDING MACHINE WITH MANDREL (AKYAPAK)
    ABM 76 CNC-1 Tube Bending Machine can bend tubes hydraulically up to 76 mm diameter with high quality. This powerful machine with its improved CNC featurethose can realized bending steps automatically, prevents waste of time, increases efficiency.
    Technical Features
    • High quality hydraulic bending system
    • Hydraulic assistant axies
    • Moving ahead and turning axis with servo control
    • Controlling ability of servo axis speeds from control panel
    • Foot pedal control
    • Step by step and full automatic working capability
    • One line die operational ability
    • Die can be supplied for any demanded size
    • Operational ability with / without mandrel.
    • Simple or complex shaped bendings for steel, stainless steel,
    aluminum and similar bendable materials
    • Auto-lubrication for mandrel
    • Hydraulic oil cooler
    • Practical interface program prepared in Akyapak
    • Program making possibility in YBC mode
    • Tube length can be calculated according top art program
    • 3D preview of writen program
    • 15’’ color touchscreen PC
    • Starting up serial production after short period training
    • Suitable for CE, ISO 9001-2008, TSEK and TURQUM
    certificates
    • Akcalar Sanayi Bolgesi, Sanayi cad. No: 8/A Akcalar

  • CNC- ROTARY AND TWIN TUBE BENDING MACHINES FOR SERIAL AND LARGE-SCALE MASS PRODUCTION
    In one step: clockwise and counter clockwise In every direction: The CNC Rotary and CNC Twin series machines for any bending application need only one step for bending both in a clockwise as well as a counter clockwise direction. Even the most complex tube geometries are possible.  
  • CNC - TUBE BENDING MACHINES FOR SERIAL AND LARGE-SCALE MASS PRODUCTION
    For any application: single stack CNC bending machines Excellent operating efficiency and precision: typical of the CNC tube and profile cold bending machines with CNC control for any application. These all-rounders bend tubing and profiles fast and efficiently. They are thus ideally suited for manufacturing in a wide range of pipe manufacturing segments and industries. Tube bending machines in the cold bending method The energy-intensive and lengthy process of heating up the tube is omitted when cold bending. Only the properties of the material set certain limits during forming. Apart from that, the tube can be brought into almost any shape. In addition, the cold bending method can be used to process materials which cannot be bent warm or where heating is simply not permitted because it changes the microstructure of the material. Basically, there are only two real restrictions for cold bending – the space available in the production hall and the machine length. When the long tubes literally do not “bump into something” during processing, they can be processed directly into complex geometries in one pass. The tube is clamped in the index head and positioned in the space by means of the transport unit and index head. After the first bend it is directly transported on and twisted if necessary. Three-dimensional tube systems without a single welding seam are the quick result.
  • BTM HYDRAULIC TUBE BENDING MACHINE
    BTM 64 tek seferde 180 derece büküm yapabilme özelliğine sahiptir. Merdiven korkuluğu üreticileri, egsoz sistemi üreticileri ve küçük çaptaki atölyeler için tasarlanmıştır. Dijital ekran sayesinde kolayca ayarlanabilen büküm kalıpları ile hızlı ve verimli büküm yapma olanağı sağlar.
    OD = ID + 2 x t D = CLR / OD L = t x k – CLR L = B° x π x CLR / 180 t : Et Kalınlığı / Thickness OD : Dış Çap / Outside Diameter ID : İç Çap / Inside Diameter D : Büküm Oranı / Bending Rate CLR : Orta Eksen Yarı Çapı / Center Line Radius k : Rijitlik Sabiti / Rigidity Constant
    • Akçalar Sanayi Bölgesi Naldöken Cad. No: 10 Nilüfer

  • ABM 76 NC MANDREL TUBE BENDING MACHINE (AKYAPAK)
    ABM 76 NC, implements bending tubes with high quality up to 76 mm tube diameter, manually. This model is presented as a more economical choice.
     
    Technical Features
    • High quality hydraulic bending system
    • Hydraulic assistant axies
    • Moving ahead is done manually
    • Controlling ability of servo axis speeds from control panel
    • Foot pedal control
    • One line die operational ability
    • Dies can be supplied for any demanded size
    • Operational ability with / without mandrel
    • Simple or complex shaped bendings for steel, stainless steel aluminum and similar bendable materials
    • Decreases costs in serial productions for high quantities or in single operations
    • Auto-lubrication for mandrel
    • Hydraulic oil cooler
    • Practical interface program prepared in Akyapak
    • PLC based control system
    • Tube length can be calculated according to part program
    • 3D preview of writen program
    • Programming ability in YBC mode
    • 15’’ color touchscreen panel PC
    • Starting up serial production after short period training
    • Suitable for CE, ISO 9001-2008, TSEK and TURQUM ertificates
    • Akcalar Sanayi Bolgesi, Sanayi cad. No: 8/A Akcalar

  • PIPE BENDING MACHINE
    Pipe bending machine The series was adapted in particular to professional world market requirements. All the parts, structure and  characters are similar to the standard of mechanical engineering from Europe.Our professional experience and  drawings plans for Electric, Electronic, Hydraulic and mechanical from known companies bring to upgrading of the machines' systems to accurate and attractive performance.CNC Series numerical control singlehead pipe bending  machine is the product from the combination with our technology and advanced Italian technology, integrated with machine, hydraulic, and electricity. This series adopt VDU touch screen operating panel, which can input, store, and display various bending data and order. Y, B, C three coordinates of motion under precision control by industrial computer can realize fullauto mandrel on or mandrel off rapid bending, CNC machine also with advanced functions, such as components bending spring back compensation, errors self diagnose alarm, memory store after power off,  automatic lubrication and safety protection. Pipe bending(C axis), pipe rotati(Y axis) are all drove by closed ring servomotor. Advanced technology, high automation reliability, integrated design  all make CNC pipe bending machine the first class pipe processing machine in the world.
    • Yingbin road 118, Haian Nantong City

  • SIDE-TO-SIDE BENDING CNC TUBE BENDER: MODEL TWS-15ND
    Maximum tube diameters φ15.9 × t1.0 (Thin-walled steel tube STKMl1A)
    φ12.7 × t1.2 (Stainless steel SUS304)
    φ19.1 × t1.2 (Non-ferrous metals, copper, aluminum 30 material)
    Maximum radii that can be bent: 60R
    Machine pitch time: About 3 seconds/bending operation on average 
    Best-suited for processing of head rests, seats, and seat frames in which interference may occur during processing
    • 92-1 Matsuba, Takaoka Toyota

  • CNC DB -TUBE BENDING MACHINES FOR BOILER & POWER PLANTS
    Bending machines for efficient batch production of tube serpentines: Performance up, costs down When it comes to the batch production of boiler tubing and tube serpentines, you need a powerful tube cold bending machine. With our CNC DB machine line you can depend on a real all-rounder - reliable even after years of continuous multi-level operation. The CNC DB series is optimized for automatic production processes and offers proof of its full effi ciency. In this regard, we have fi tted it with numerous technical features: starting with the CNC multi-axis control unit, continuing with the integrated tube positioning device and the smart booster with its programmable boost factor.
  • CNC TUBE BENDER: MODEL KB-70ND
    Maximum tube diameters  φ70.0 × t2.6 (Thin-walled steel tube STKMl1A)
    φ60.5 × t2.0 (Stainless steel SUS304)
    φ76.3 × t2.5(Non-ferrous metals, copper, aluminum 30 material)
    Maximum radii that can be bent: 200R
    Machine pitch time:
    About 5 seconds/bending operation on the average 
    * Best-suited for large tubes used in automotive mufflers, manifolds, and boiler tubing
    • 92-1 Matsuba, Takaoka Toyota

  • CNC DB - TWIN TUBE BENDING MACHINES FOR BOILER & POWER PLANTS
    Boiler Plants: Our bending machines are equipped for complex tasks We have developed our DB-Twin CNC tube bending machine series specifically for the increasingly complex requirements of boiler plant manufacturing. These tube bending machines can be used in any combination and for bending applications either in clockwise or counter-clockwise directions. Large-scale coiled piping configurations can be bent even when using counter-clockwise bending directions without having to turn the coiled pipe after every tube bend. The advantage of an arrangement of two parallel bending heads is that different bending radii can be bent within one system The system’s high degree of automation means that an optional terminal end bender can be used which is capable of forming bends easily in both bending directions at the back end of a coiled piping confirmation or a piping system.