Negara

Italy (9)

Semua Negara (9)

Kategori Member

Platinum (9)

Semua Kategori Member (9)

Kategori Perusahaan

Manufacturer (9)

Semua Kategori (9)

Mesin Dan Peralatan Tempa (Forging)

Konten Indikasi Harga belum tersedia

Produk terkait

  • HYDRAULIC HOT SHEARS CTCH SERIES
    Hydraulic hot shears – CTCH series The hot shears of the “CTCH” series are able to heat and cut the bars in one only operation for immediate press feeding. These machines ensure the best return on investment because of: Possibility to shear steels that cannot be cold sheared Reduction of the material flow inside the factory Reduction of the material cost Reduction of the forging scrap Reduction of the heating cost Reduction of the costs for the personnel involved
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123

  • FICEP CARBIDE DISC SAWS SP
    Carbide disc saws – SP series
    Automatic disc sawing lines with “carbide tipped” blades, specifically meant for the sawing of pipes This range of high performance sawing machines is characterized by an extremely sturdy construction with high structural stiffness. The life of the blade and the sawing quality are ensured by the automatic modulation of the cutting parameters during the working cycle; in particular, this implies the execution of the dynamic adjustments of the blade rotation speed and of the head feed during the entry/exit phase in the pipe, where the metal section engaged by the blade is larger compared to the central part whose thickness is minimum, thus reducing also the cycle time. Furthermore, these sawing machines are fitted with a special blade guiding system with 3 couples of high resistance steel sliding blocks with air operated support, which reduce to a minimum the vibrations produced during the working cycle and ensure a high quality of the sawn piece.
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123

  • FICEP HYDRAULIC PRESSES - HF SERIES (FORGING MACHINE)
    Hydraulic presses – HF series
    The hydraulic press HF series is suitable for performing and trimming of hot forged steel parts. The monolithic structure is made of steel and can absorb all the typical deformations and extensions of the forging industry. The ram is guided with bronze shoes along its entire length which guarantees a high precision and a good perpendicularity of the die base plate in very tough working conditions. The hydraulic power pack placed over the press reduces the overall dimensions allowing high process speed. This reduces the contact time between the work piece and the dies, thus increasing the life of the dies. The press is equipped with very large side windows that facilitate loading and unloading operations of the machine. Thanks to the lateral cylinders the lifting speed of the ram is very fast, thus reducing the working cycle time and energy consumption. This very versatile press can be equipped with special accessories, such as the upper mobile die holder, allowing the realization of complex forged parts.
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123

  • FICEP DIRECT DRIVE PRESSES (FORGING MACHINE)
    The “DIRECT DRIVE” screw press proposed by FICEP beside the standard presses with disc control, is characterized by important technical and economical innovations which place this machine ahead of the market.    
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123

  • FICEP MECHANICAL SHEARS CADDY SERIES
    Mechanical shears – Caddy series Mechanical shears – Caddy series The CADDY machines are mechanical shears with horizontal slide, designed to operate in automatic starting from the bar bundle up to the unloading of the slugs. The heart of the billet shear is represented by the shearing area, and Ficep CADDY series can offer unique features: horizontal mechanics no foundation required rotation on the longitudinal angle high productivity noiselessness Option accessories: automatic weighing system and selection of the slugs in weight classes laser control of the bars’ dimensional tolerances before the shearing operation bars’ pre-heating to allow the shearing of critical materials without cracks.
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123

  • FICEP ELECTRICAL HOT SHEARS CTCV SERIES
    Electrical hot shears – CTCV series
    New range of high performance hot shearing systems, completely electric. The main 4 axes are driven by new developed electro-mechanic actuators: blade, hold down, square cutting attachment and length gauge. The main advantages are: Reduction of the cycle time with possibility of coupling with the fast and modern transfer presses. Modulation of the blade speed during the shearing process allowing an improvement of the shearing quality, especially on “difficult” steels. Absence of hydraulic oil and therefore no fire risk caused by leaks. Higher efficiency compared to the traditional hydraulic drives.
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123

  • FICEP HYDRAULIC PRESSES - HD SERIES (FORGING MACHINE)
    The new HD series hydraulic press is designed for pressing and hot extrusion of details that require a high binding transformation energy. The structure consists of a base and a cylinder head made in casting and, thanks to the columns preloaded with tie rods, provides high axial stiffness.
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123

  • FICEP FRICTION SCREW PRESSES - PVS & PVX (FORGING MACHINE)
    The high flexibility of the FICEP friction screw presses gives it a wide range of uses for different shapes and sizes of parts thus resulting in technical and economical optimization in the hot forging of steel, brass and aluminium and in coining.
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123

  • FICEP CARBIDE DISC SAWS S - BILLET SHEARS
    Carbide disc saws – S series Ficep, with more than 80 years of experience in the manufacture of billet shears and CNC shearing systems is presenting a new range of high performance disc sawing machines fitted with ‘carbide tipped’ blades. These new sawing lines overcome all the limitations of the traditional disc or band saw and increase productivity output thanks to their exceptional performance in terms of speed, accuracy, sawing quality and allowing a reduction in scrap production. This also results in a sizeable reduction of cutting costs! PRODUCTIVITY: bars with diam. 50 mm and length 100 mm = 400 pcs/h SCRAP: bars up to diam. 130 mm = 2,7 mm COST PER CUT: 50% less than the cost using re-ground blades CUTTING QUALITY: perfectly parallel, flatness, roughness and absence of flash SET-UP: simple and fast. Technical
    • Via Giacomo Matteotti, 25 Gazzada Schianno
    • +852 25446888
    • +852 25445123