Notching Machine

Filter Pencarian

Negara

Turkey (2)

Germany (3)

Taiwan, Province of China (1)

China (1)

United States (3)

Italy (12)

India (1)

Indonesia (4)

Belgium (1)

Semua Negara (28)

Kategori Member

Platinum (2)

Free (25)

Semua Kategori Member (27)

Kategori Perusahaan

Producers (25)

Distributors (3)

Semua Kategori (28)

Produk terkait

  • KRISBOW - HAND NOTCHER 1.6MMX4TON
      For mild steel and plate Light metal morethickness Heavy duty blade  
    • Kawan Lama Building, Jl. Puri Kencana No.1 Kota Adm. Jakarta Barat
    • +62 21 5828282
    • +62 21 5820088

  • FIXED ANGLE NOTCHING MACHINE FN2004
      trip cutting with scale with fast adjusment for maximum strip size 200mmx200mm Two self locking stops with moveable and exchangestop bar 350mm in length One set upper and 1 set bottom of bladesfor mild steel, reverse type Triplex scale on the working tablefor fast adjustment of the stops Plexiglass guard for easy vision Moveable and set up switch Single and set up stroke Adjustable stroke  
    • Kawan Lama Building, Jl. Puri Kencana No.1 Kota Adm. Jakarta Barat
    • +62 21 5828282
    • +62 21 5820088

  • DOUBLE STATION - KVA 200/6 NOTCHING MACHINE
    • Oleo dynamic working through two cylinders to guarantee a constant and smooth notching.
    • A large and rigid working table with directional triple functions engraved brass scales for measuring the various types of notches.
    • Squaring guides equipped with reference holes every 15°.
    • An absolute rigidity of the notching group is provided by lateral columns and by a central guide.
    • Internal stroke to turn the notching machine into a small shearing machine in order to get straps with a maximum length of 200 mm.
    • A head configuration allowing cuts longer than the blade length.
    • Blade holder sector blocking through 8 cylinders and a safety device preventing the machine from any movement when the blades are released.
    • Six slots with brass scales on the working table to enable the operator to use disappearing references and to obtain complex notching.
    • Electronic stroke regulator with digital reading.
    • Brass measuring scales with a triple function to guarantee a quick set up of the piece and a long endurance.
    • A cutting area protection sheet in Polycarbonate that gives the operator uninhibited sight of the working area while assuring a great working safety.
    • Fixed alignment between the upper and the lower blades with rectified guides in order to guarantee parallel movements among the blades.
    • A control board from which it’s possible to select the single stroke working or shot working in order to make it easy to personalize and optimize the time thanks also to the electronic stroke regulator which sets a limit to the stroke to a pre-arranged position according to the requirements.
    • Swarf collecting box.
    • Via Aldo Moro, 33 Formigine
    • +39 059 511301
    • +39 059 511318

  • FA 200/4 - FIXED ANGLE NOTCHING MACHINE
    The technical features of the E (Europe) versions of the fixed and variable angle notching machines are generally speaking the same of the standard models, except for the differences that you can find here below.
    • Via Aldo Moro, 33 Formigine
    • +39 059 511301
    • +39 059 511318

  • IMAC - DOUBLE STATION NOTCHING MACHINE
    Notching station: 
    • The Oleo dynamic working through 2 hydraulic cylinders, and 5 guides allows an absolute rigidity of the notching group and guarantees the chance of notching without removing the punch in the punching station.
    • Automatic adjustment of the blade gap from 1 mm to 6 mm
    • Blade holder sector blocking through 8 cylinders and a safety device preventing the machine from any movement when the blades are released.
    • A large and rigid worktable with directional triple functions engraved brass scales for measuring the various types of notches.
    • Fixed alignment of the upper and lower blades with rectified guides in order to guarantee parallel movements among the blades.
    • Squaring guides equipped with reference holes every 15°.
    • A configuration of the blades-holder head allowing upper cuts longer than the blade length.
    • 9 T slots of which 6 are equipped with brass scales on the working table to enable the operator to use disappearing references and to obtain complex notching.
    • The machine is equipped with an electronic stroke adjuster with digital reading 
    • A cutting zone protection sheet in Polycarbonate that gives you uninhibited sight of the working area while assuring your maximum safety.
    • A control board from which it's possible to select the single stroke working or shot working in order to make it easy to personalize and optimize the time thanks also to the electronic stroke adjuster which sets a limit to the stroke to a pre-arranged position according to the requirements.
    • Internal stroke to turn the notching machine into a small shearing machine in order to get straps with a maximum length of 200 mm.
    • The machine is equipped with 2 boxes to collect the swarf 

    Punching station: 
    • A quick change tool holder model Trumf, Rainer or Fim production model.
    • Neck depth: 300 mm
    • Punching machine: 20 Tonnes
    • Electronic device to reduce the down stroke speedness and let the operator carry out even complex workings like small bendings and deformations.
    • An optional special adapter to house bending tools up to a maximum length of 415 mm or 830 mm.
    • Brass scales for the two axis reading.
    • via Aldo Moro, 33 - Formigine
    • +39 059 7133194
    • +39 059 7133191

  • AV226/PA NOTCHING MACHINES MULTIPLE WITH VARIABLE ANGLE
    The AV/PA version is predisposed for the mounting of a punching head for carrying out drilling, beading, nibbling, shutter slits, straight cuts and so on. There is also the option of activating the cutting or punching unit via the special reversing button. The cutting capacity of variable angle notching machine is of 6 mm. thickness, and the cutting angle can be adjust from 30° to 140°. Subject of a SIMASV® patent, the most important characteristic of the variable angle notching machine AV226/PA is the automatic adjustment of the slack between the blades from 1 to 6 mm in thickness. The cut may start from the tip or the base of the blades, and the auto-adjustment system between the upper and lower blades allows simultaneous cutting of different thicknesses. The machine is equipped with hydraulic blade blockage.
    • Viale dell Thiene
    • +39 0445 370475
    • +39 0445 364450

  • #14 & 18 M BENDER
    The #14 and #18 Mechanical Benders are proven workhorses for bending reinforcing bar. The rugged, heavy welded steel construction combined with simple mechanical drive assures continuous operation under adverse conditions. Forward or reverse bending enables all types of bending to be performed with ease. KRB Bender Head 2000 controller has 9 bend stations, set up by either numeric counts or by degree of bend angle, 99 memory storage locations, encoder and home switch error detection. KRB BCD Table Bender controller is capable of downloading from a host computer or the shape can be scanned from a 2D bar code. This unique controller will actually show the dimensions for setting up the bends. In other words, it shows the chalk mark for the proper bend location. This eliminates test bends and minimizes set-up time. This control also makes a perfect training tool for new bender operators.
    • 1058 Cool Creek Road Wrightsville

  • NOTCHING MACHINE LB13 STANDARD
    The LB 13 Standard is the basic model of its line and permits notching with a fixed angle of 90°.
    lt guarantees clean cuts in all sheet metal thicknesses and high repetitive accuracy of the notchings. lt is also ideally suited for cuts on one side.
    Because of the special design of the LB 13 the blades achieve an extraordi-narily high life even when notching special steel.
    Further characteristics of the LB 13 line:
    Automatic cutting gap adjustment Maintenance-free lubrication system Integrated overload protection Extremely soft (whispering machine)
    • Mattenstr.1 LÃrrach
    • +49 7621 9593 0
    • +49 7621 55184

  • AF400CN - NOTCHING MACHINES (FIXED OR VARIABLE ANGLE WITH CNC)
    The hydraulic notching machine AF400CN with 90° fixed and max. cutting capability di 6 mm on steel and 4 mm on stainless steel, is equipped with the NC PROGRAMMER SIMplylogik® controlling the program and the micrometer stroke adjustment: thanks to this system the machine achieves an extraordinary cutting precision equals to 0.1°.
    The AF400CN model distinguishes itself from the other notchers in the market because its blades reach the length of 400 mm and the same cutting length equals to 400 mm.

    • Viale dell Thiene
    • +39 0445 370475
    • +39 0445 364450

  • AF228 NOTCHING MACHINES FIXED ANGLE
    The fixed angle notching machine AF228 has a compact structure, and a shearing head in GS500 fusion with downwards movement. The workbench is fitted with conical slots for housing of the squares. The conical form of the slots has been especially designed to give greater rigidity to the squares to guarantee greater precision. Subject of a SIMASV® patent, the most important characteristic is the automatic adjustment of the slack between the blades from 1 to 8 mm in thickness. The cut may start from the tip or the base of the blades (for thickness from 6 to 8 mm.), and the auto-adjustment system between the upper and the lower blades allows simultaneous cutting of different thicknesses.
    • Viale dell Thiene
    • +39 0445 370475
    • +39 0445 364450

    • No. 75, Fu Tat St, Hsi Bah Village, Wu Jih Dist, City, Taichung
    • +886 4 23352579
    • +886 4 23352773

  • VA 220/6R NOTCHING MACHINE
    Automatic blade gap adjustment (European Patent n. 1.214.004), to ensure perfect cuts with different thicknesses (from 1 to 6 mm) and types of material with no burr, no time loss and no manual interspace adjustment. Absolute rigidity of the notching unit monoblock ensured by two Meehanite 650 N/mm² steel castings joined together in a monoblock with three guides, two sides columns and a central guide. Symmetrical and no-symmentrical adjustment of the notching angle varying from 30° to 140°. The hydraulic clamping acting on the blades with 2 hydraulic cylinders ensures the positioning of the selected cutting angle. Security device: when the blades are in unclamping position, the machine cannot perform notching operations. The monoblock construction together with 3 guides guarantees a long trouble free machine life. No other technical solution can be compared to the results obtained by Euromac machines. Reversible blades with possibility to choose positive cutting (starting to cut from the front adge) or negative cutting (starting from the rear side). On all models reversible blades at 30° positive and 60° negative are standard. Selector for functioning in single step or cycle step. Shearing function for cutting using a single blade with internal depth stop rod.
    • Via per Sassuolo, 68/g Formigine

  • MAXI 250/6 NOTCHING MACHINE
    The MAXI series are fixed 90 degree with 6mm mild steel notching capacity. This MAXI can notch a 90 degree angle in 6mm mild steel with maximum length of 250mm. The MAXI model has a large working table with adjustable stops and several scales machined into the table surface. The blade clearance is set automatic and a jog mode jogs down the blades
    • Oekensestraat 120 - (Belgium) Rumbeke
    • +32 57 20 43 08
    • +32

  • AV228 NOTCHING MACHINES VARIABLE ANGLE
    The variable angle notching machine AV228 boasts a solid structure, a shearing head in GS500 fusion with downwards movement, and the workbench is fitted with conical slots for housing of the squares. The conical form of the slots has been especially designed to give greater rigidity to the squares to guarantee the greater  precision. The cutting capacity of variable angle notching machine is of 8 mm. thickness, and the cutting angle can be adjust from 30° to 140°. Subject of a SIMASV® patent, the most important characteristic of the variable angle notching machine AV228/B is the automatic adjustment of the slack between the blades from 1 to 8 mm in thickness. The cut may start from the tip or the base of the blades, and the auto-adjustment system between the upper and lower blades allows simultaneous cutting of different thicknesses. The machine is equipped with hydraulic blade blockage.
    • Viale dell Thiene
    • +39 0445 370475
    • +39 0445 364450

  • NOTCHING MACHINE
    NOTCHING MACHINE
    • Komplek Hotel Orchardz Jl. Pangeran Jayakarta No. 44/22-24 Kota Adm. Jakarta Pusat

  • IMAC - VARIABLE ANGLES NOTCHING MACHINE
    • Oleo dynamic working through two cylinders to guarantee a constant and smooth notching.
    • A large and rigid working table with directional triple functions engraved brass scales for measuring the various types of notches.
    • Squaring guides equipped with reference holes every 15°.
    • An absolute rigidity of the notching group is provided by lateral columns and by a central guide.
    • Internal stroke to turn the notching machine into a small shearing machine in order to get straps with a maximum length of 200 mm.
    • A head configuration allowing cuts longer than the blade length.
    • Blade holder sector blocking through 8 cylinders and a safety device preventing the machine from any movement when the blades are released.
    • Six slots with brass scales on the working table to enable the operator to use disappearing references and to obtain complex notching.
    • Electronic stroke regulator with digital reading.
    • Brass measuring scales with a triple function to guarantee a quick set up of the piece and a long endurance.
    • A cutting area protection sheet in Polycarbonate that gives the operator uninhibited sight of the working area while assuring a great working safety.
    • Fixed alignment between the upper and the lower blades with rectified guides in order to guarantee parallel movements among the blades.
    • A control board from which it’s possible to select the single stroke working or shot working in order to make it easy to personalize and optimize the time thanks also to the electronic stroke regulator which sets a limit to the stroke to a pre-arranged position according to the requirements.
    • Swarf collecting box.
    • via Aldo Moro, 33 - Formigine
    • +39 059 7133194
    • +39 059 7133191

  • HYDRAULICS NOTCHING MACHINE
    Up to12 mm mild steel capacity Moveable electric foot pedal Adjustable stroke with the help of limit switches / proximity switches & potentiometer. Scrap bucket Machine can be adjusted through a range of -180\B0. Fast approach & fast return Extra long, precision machined & hardened guides to cutting ram offer exceptional accuracy. Manual blade clearance adjustment for different material thicknesses. This notching machine can be adjusted through a range of -180\B0.
    • 341, GIDC Por, Ramangamdi, Por Vadodara

  • MESIN NOTCHING PIPA
    Mesin Notching pipa
    • Jl. P. Jayakarta 20 NO A11 Jakarta Pusat Jakarta , Indonesia Kota Adm. Jakarta Pusat

  • HKA - NOTCHING MACHINE
    Baykal hydraulic corner cutting machines with angle setting have a strong structure with its steel table and eye tooth material provided with static and dynamic rigidity. By preferring Hydraulic Corner Cutting HKA, which is designed and manufactured as need oriented, you will make an advantageous choice for your company.
    • Organize Sanayi Bölgesi Lacivert Cd. 2. Sk. No: 1/A Bursa
    • +90 224 294 77 00
    • +90 224 243 12 86

  • VA 200/6 VARIABLE ANGLES NOTCHING MACHINE
    Oleo dynamic working through two cylinders to guarantee a constant and smooth notching.
    • A large and rigid working table with directional triple functions engraved brass scales for measuring the various types of notches.
    • Squaring guides equipped with reference holes every 15°.
    • An absolute rigidity of the notching group is provided by lateral columns and by a central guide.
    • Internal stroke to turn the notching machine into a small shearing machine in order to get straps with a maximum length of 200 mm.
    • A head configuration allowing cuts longer than the blade length.
    • Blade holder sector blocking through 8 cylinders and a safety device preventing the machine from any movement when the blades are released.
    • Six slots with brass scales on the working table to enable the operator to use disappearing references and to obtain complex notching.
    • Electronic stroke regulator with digital reading.
    • Brass measuring scales with a triple function to guarantee a quick set up of the piece and a long endurance.
    • A cutting area protection sheet in Polycarbonate that gives the operator uninhibited sight of the working area while assuring a great working safety.
    • Fixed alignment between the upper and the lower blades with rectified guides in order to guarantee parallel movements among the blades.
    • A control board from which it’s possible to select the single stroke working or shot working in order to make it easy to personalize and optimize the time thanks also to the electronic stroke regulator which sets a limit to the stroke to a pre-arranged position according to the requirements.
    • Swarf collecting box.
    • Via Aldo Moro, 33 Formigine
    • +39 059 511301
    • +39 059 511318