Negara

Indonesia (1)

Semua Negara (1)

Kategori Member

Free (1)

Semua Kategori Member (1)

Kategori Perusahaan

Manufacturer (1)

Semua Kategori (1)

Bottom Dump trailer

Keterangan

Belly dumps [also know as Omaha ] have gates in the bottom of the unit to release their load. Most commonly used for road surface graveling. They are much safer as the gravel or sand can be spread while the transport unit is still moving. Although quite limited in their use they are a popular choice for road construction. They do have problems when the weather gets cold so they are used mostly in the summer months or in warmer climates. The mechanism can be various chutes or a clam design where the sides move out from the center to deposit the material out of the bottom of the trailer. A clam type belly dump will work better for moving earth as a chute model has limited amount of space for the passing of material.

Nama lain (trademark, branding etc.)

Belly dumps

Konten Indikasi Harga belum tersedia

Produk terkait

  • BOTTOM DUMP TIPPER TRAILER (UNITED TRACTORS PANDU ENGINEERING)
    BOTTOM DUMP TRAILER
    “Bottom Dump Tipper Trailer” Capacity : SBD55 (55 m3)                     SBD67 (67 m3)
                        SBD80 (80 m3) Capacity : SBD55 (55 m3)
                        SBD67 (67 m3)
                        SBD80 (80 m3) Chassis : All welded structure of SM490YA Body : All welded construction of SM490YA, thickness wall and gate is 5 mm King Pin : Holland KP-0885, 3.5" Dia Landing Gear : Heavy duty landing gear, fabricated by UTE Suspension : Overslung suspension compriseng of multi duty leaf springs capable to 20 tonnes capacity Axle : 20 tonnes Korean axle from TAE GIL TECH CO.LTD with fitted to 24"rim, 10 studs bolts Tire & Rim : Pirelli TG85, 12.00x24-20 PR with 8.5xR24 rim, Dual Spacing 370 mm Brake System : 2 lines of standard air pressure line which consist of service and emergency line, quick release valve and single chamber 30 Electrical System : 12 volt electrical line, combined with stop, tail and clearance light Hydraulic System : An open center loop consist hydraulic control valve with double acting hydraulic cylinder for release gate which made in Korea from TAE GIL TECH CO.LTD        DOLLY (DL30 & DL50) Chassis : All arc welded structure of SM490YA Drawbar : High quality fabricated square tube with outside and inside stiffner Towing Eye : Weldable heavy duty towing eye Fifth Wheel : Boomerang type BE190 Double Oscillating Suspension : Overslung suspension comprising of multi duty leaf springs capable to 20 tonnes capacity Axle : SBD67 : DL30 (17,5 tonnes YORK axles with fitted to 24" rim, 10 stud bolts
                SBD80 : DL50 (20 tonnes YORK axles with fitted to 24" rim, 10 stud bolts Tire & Rim : Pirelli TG85, 12.00x24-20 PR with 8.5xR24 rim, Rim offset 370 mm Brake System : 2 lines of standard air pressure line which consist of service and emergency line, quick release valve and single chamber 30 Electrical System : 12 volt electrical line, combined with stop, tail, and clearance light
    • Jl. Raya Bekasi Km. 22 Kota Adm. Jakarta Timur