Negara

China (1)

Indonesia (20)

United Arab Emirates (1)

Semua Negara (22)

Kategori Member

Free (21)

Semua Kategori Member (21)

Kategori Perusahaan

Producers (1)

Distributors (1)

Fabricators (3)

Contractors (3)

Steel Service Center (1)

Inspection, Testing and Standardisation (12)

Consultant (1)

Semua Kategori (22)

Layanan Inspeksi dan Pengujian

Konten Indikasi Harga belum tersedia

Produk terkait

  • ROUTINE MAINTENANCE
    Layanan kami fokus pada aset dan peralatan Mekanis, bervariasi dari peralatan berputar (Pompa, generator, mesin) hingga peralatan statis (tangki penyimpanan, bejana bertekanan, pipa, pipa, infrastruktur pabrik darat, platform lepas pantai / struktur bagian atas) sementara juga mampu menangani listrik Kerja instrumen Cakupan layanan MESITECH mencakup survei lapangan, pengumpulan data dan analisis, rekomendasi pemeliharaan atau perbaikan, pelaksanaan pemeliharaan, fabrikasi dan pemasangan.
    • Perkantoran Pusat Niaga Duta Mas Fatmawati Blok D2 No. 16- Jl. RS. Fatmawati No. 39 Kota Adm. Jakarta Selatan

  • SHUTDOWN/TURNAROUND MAINTENANCE
      MESITECH memiliki banyak pengalaman yang melibatkan Turn Around (TAR) kegiatan perawatan dengan berbagai Klien kami. Kami berpengalaman dan kompeten untuk menangani dan melakukan berbagai tugas dan ruang lingkup dengan tenaga kerja besar yang digunakan, jadwal dan kerangka waktu yang ketat, dan dengan kualitas keselamatan yang tinggi dan berisiko tinggi untuk dikelola. Kemampuan kami untuk mengelola, melaksanakan dan menyelesaikan cakupan turnaround yang efektif, efisien dan aman dalam waktu shutdown yang terjadwal telah memungkinkan Perusahaan untuk mengurangi masa downtime mereka untuk kegiatan operasi mereka, sehingga mengoptimalkan produksi tanaman mereka.
    • Perkantoran Pusat Niaga Duta Mas Fatmawati Blok D2 No. 16- Jl. RS. Fatmawati No. 39 Kota Adm. Jakarta Selatan

  • NON-DESTRUCTIVE TESTING INSPECTION
    ICO Asiapacific provides a full range of Non-Destructive Testing services for oilfield tools, offshore equipment, and manufacturer's stock materials. Whether you require pre-inspection of bar stock prior to machining or analysis of a failed component, any inspection can be tailored to meet customer requirements. General NDT Services we currently offer are: Our general NDT services include: Positive Material Identification Ultrasonic Inspection, compression and shearwave Magnetic Particle Inspection Liquid Dye Penetrant Inspection Electromagnetic Inspection Dimensional Verification Magnetic Permeability (Hotspot) Inspection Material Traceability Failure and Root Cause Analysis
    • 1 Stop Success Building. Lt 2, Kota Adm. Jakarta Selatan

  • HARDBANDING SERVICES
    ICO Hardbanding Services are not covered in our API –Q1 Certification. ICO Asiapacific offers Hardbanding services on tool joints for all types of Drillpipe, heavyweight and drill collars; our operators are experienced with the application of most oilfield Hardbands, including ARNCO and Duraband. ICO also has available a proprietary Hardbanding material, ICO 518 Ti, a non-cracking Titanium-Carbon alloy wire. Its specially formulated matrix core eliminates the need for gas shielding, reducing variables during application. ICO 518's unique balance of Titanium, Carbon, and Manganese gives the final product high plasticity and increased wear properties, lengthening the tool's usable life and reducing casing wear.
    • 1 Stop Success Building. Lt 2, Kota Adm. Jakarta Selatan

  • TESTING AND INSPECTION
    All items in our product range conform to the EN 10204 3.1 certification process. Additionally, various inspections and material tests can be carried out upon request, both destructive and non-destructive. The most common type of destructive testing consists of additional 3.2 testing under the supervision of Lloyd’s or another independent inspection body. Materials can also be inspected prior to being shipped, either by the customer or an independent inspection body appointed by the customer.
    • Plot S10305, South Zone 1, Jebel Ali Free Zone Dubai

  • DRILLING TOOLS INSPECTION SERVICES
    ICO Asiapacific is the leading provider of NDT Services of Drillpipe, Bottom Hole Assembly and Speciality Drilling Tools Inspection in South East Asia. Our services include: Visual Inspection and acceptance of rotary connections Magnetic particle inspection, using black light or dry powder, of BHA and specialty tools Liquid dye penetrant inspection, for non-magnetic tools Ultrasonic shearwave inspection of tool joints Ultrasonic Inspection of wall thickness Full length electromagnetic inspection of tubular is computer controlled & recorded Hot spot checking of non-magnetic tools Internal pneumatic rattling and external cleaning of tubular API full-length drifting of tubes Rust preventative internal and external coating of tubular for storage Refacing of connection sealing faces Rebevelling of tool joints to DS-1 criteria Straightening of tube bodies ICO has the capabitlity to perform inspection services to the following accpeted oilfield recommneded practices and specifications API (American Petroleum Institute) Specifications and Recommended Practices T.H. Hill DS-1 (All Categories) FEARNLEY PROCTOR NS-2 (All Categories) B.S. (British Standards) as applicable ISO (International Standards Organization) Specifications and Recommended Practices
    • 1 Stop Success Building. Lt 2, Kota Adm. Jakarta Selatan

  • NATIONAL DC5-163 COMPOUND BIOLOGICAL MICROSCOPE
    PRODUCT SERVICE : Electronic, Binoculars and Scopes, Camcorders, GPS, Laptops/Notebooks, Projection and Display, Surveillance, Turntables and Players, TV and Entertainment

    For order and more information about our product list, please visit to our official website company clickboss . net
    • Jl KH Hasyim Ashari 64 Cideng Kota Adm. Jakarta Pusat

  • THIRD PARTY INSPECTION
    For products that are critical to safety, the ramifications of poor quality are substantial. The costs of substandard quality anywhere in your supply chain can be measured in lost time, reduced efficiency, decreased profit, and even risk to life or limb. That’s where ICO comes in. We offer quality assurance and control to the materials, processes and procedures that produce or maintain the products you provide to your customers, or are provided by your vendors. When your assets meet requirements and conform to the highest standards you can rest assured, knowing you are delivering the quality that will keep your customers satisfied. ICO can provide Third Party Inspection services against applicable manufacturing codes/customer technical specifications/national-international standards, through our diverse staff of highly trained and qualified QA/QC personnel. We specialize in: OCTG Inspection to T.H.Hill DS-1, API, or NS-2 standards QA/QC support for Drilling and Completion tools Line Pipes for oil transportation to API specifications Offshore Containers, Lifting Gear & Material Handling Systems to DNV, ISO, or BS EN standards Pressure vessels & heat exchangers intended for Chemicals & Fertilizer Plants Storage tanks for Chemicals / LPG / Cryogenic & Non-Cryogenic Service, against API 620 & API 650 standards Raw materials covering Steel Plates, Tubes, Pipes, Forgings & Castings Power generating equipment covering Boilers, Turbines, Pressure Vessels, Heat Exchangers, Piping, Welded Structures, Ash / Coal Handling / Water Treatment Plants & Boiler Accessories Electrical equipment covering Motors, Generators, Transformers, Power Transmission / Distribution Control Panels Diesel Engines, Pumps, Valves, Gear Boxes Hydraulic Hoses & Fasteners
    • 1 Stop Success Building. Lt 2, Kota Adm. Jakarta Selatan

  • CONSTRUCTION SERVICES
      MESITECH memiliki kemampuan dan pengalaman dalam melakukan pekerjaan konstruksi selain dari bisnis inti kami dalam layanan pemeliharaan. Beberapa kontrak kami mengharuskan kami melakukan konstruksi dan perbaikan di area Brownfield atau Greenfield. Kami berusaha untuk tantangan dalam melakukan konstruksi di Brownfield dimana struktur atau pabrik produksi sudah ada yang sudah beroperasi.
    • Perkantoran Pusat Niaga Duta Mas Fatmawati Blok D2 No. 16- Jl. RS. Fatmawati No. 39 Kota Adm. Jakarta Selatan

  • ENGINEERING SERVICES
    By leveraging our lengthy presence in the Indonesia Market of Inspection and Certification, PTIA can also provide the Engineering.
    • Gedung 18 Office Park- Lantai 20- Unit 20 H- Jl. TB. Simatupang No. 18 Kota Adm. Jakarta Selatan

  • HOOK-UP & COMISSIONING
    EJJV - Kegiatan pengadaan dimulai dari pertanyaan, seleksi vendor, pembelian, ekspedisi, inspeksi, koordinasi, transportasi dan bahan yang diterima di basis logistik EJJV.
    • Gedung Adhi Graha Lt. 12 Suite 1203-1204- Jl. Jend. Gatot Subroto Kav. 56 Kota Adm. Jakarta Selatan

    • Jl. Cipinang Muara I Rt. 006/03 Kel. Pondok Bambu, Duren Sawit Kota Adm. Jakarta Timur

  • SURVEILLANCE SERVICES
    ICO provides independent TPI for various inspection projects and work, ranging from equipment inspection at manufacturing facilities, mill surveillance, and witnessing of pressure testing on manifolds and tubulars. ICO can also act as onsite client representatives for QA/QC. In the current global marketplace, it’s not always convenient to be onsite to make sure vendors are providing you with the best quality goods and services. ICO’s knowledgeable and experienced inspectors are available to assist in various inspection projects; from primary manufacturing and mill surveillance, witnessing of equipment handling and load-outs, or acting as the Customer’s onsite representative to ensure quality control. With an ICO inspector onsite, you can be sure: Vendor certifications and procedures are in compliance Proper handling procedures are utilized Quality and traceability are maintained Manufacturing and delivery schedules are monitored
    • 1 Stop Success Building. Lt 2, Kota Adm. Jakarta Selatan

  • PENELITIAN DAN PENGEMBANGAN SUMBERDAYA DAN LINGKUNGAN HIDUP
    Penelitian dan Pengembangan Sumberdaya dan Lingkungan Hidup
    • Jl. Jatisari No.28 Kab. Banyumas

  • PROJECT MANAGEMENT
    Project Management
    • Gedung 18 Office Park- Lantai 20- Unit 20 H- Jl. TB. Simatupang No. 18 Kota Adm. Jakarta Selatan

  • ON LINE LEAK SEALING
    On line leak sealing process enables plant operators to repair leaks without plant shutdown. The process is widely used in fossil and nuclear power station, refineries and petrochemical plants, oil production platform, pulp and paper mills and other continues process plants to prevent expensive emergency shutdown and to converse energy by providing safe, controlled, and engineering reliable solutions. The priority for every industrial plant is to stay on-line; therefore On Line Leak Sealing will maximize the plant production facilities up time. It means plant will keep producing the output while solutions to leak base problem is being delivered. Time-Energy-Money will be saved, noise level and erosion level will reduce and plant’s safety will increase. With support from worldwide expertise of on line leak sealing service company, HEXAREKA has successfully sealed many kind of leaks problems, including leaking flanges connection, valve gland, valve bonnet, heat exchanger joint, screwed coupling, pipe union or pinhole pipe and others. Whether it is steam, hydrocarbon or gas, at temperature ranging from cryogenic to 900oC and at pressure up to 400 bar, Hexareka offers reliable leak sealing solutions.On line leak sealing process enables plant operators to repair leaks without plant shutdown. The process is widely used in fossil and nuclear power station, refineries and petrochemical plants, oil production platform, pulp and paper mills and other continues process plants to prevent expensive emergency shutdown and to converse energy by providing safe, controlled, and engineering reliable solutions. The priority for every industrial plant is to stay on-line; therefore On Line Leak Sealing will maximize the plant production facilities up time. It means plant will keep producing the output while solutions to leak base problem is being delivered. Time-Energy-Money will be saved, noise level and erosion level will reduce and plant’s safety will increase. With support from worldwide expertise of on line leak sealing service company, HEXAREKA has successfully sealed many kind of leaks problems, including leaking flanges connection, valve gland, valve bonnet, heat exchanger joint, screwed coupling, pipe union or pinhole pipe and others. Whether it is steam, hydrocarbon or gas, at temperature ranging from cryogenic to 900oC and at pressure up to 400 bar, Hexareka offers reliable leak sealing solutions.
    • JL.CIPINANG MUARA I NO.21.B RT.006 RW.003 Kota Adm. Jakarta Timur

    • Gedung Nariba Dua Unit 102 Ruang 9, Jl. TB. Simatupang No. 49 Rt. 006/011 Gedong, Pasar Rebo Kota Adm. Jakarta Timur
    • +62 21 71473790
    • +62 21 8404542

  • ON LINE SAFETY VALVE TESTING (TREVITEST)
    On line safety valve testing or widely known as Trevitest system has been designed to test safety and relief valves on line under normal operating condition (hot testing). Service experience shows that the test result of Trevitest is within plus or minus one per cent (1%) of the set pressure when equipment is operated by trained technicians. The Trevitest principle is to apply a force to the valve spindle to overcome the spring tension of the valve. This is achieved using a hydraulic power pack linked to an electronic force transducer. A computer is then used to measure the forced applied. By combining this data with information on the valve seat and line pressure of the valve, it is possible to assess the set pressure. Benefits of Trevitest Hot Testing : Fuel cost are significantly reduced, as it is not necessary to raise system pressure Plant production is not interrupted while the valve is tested Welded in valve can be adjusted without removal from the line The cost of removing valves in correct working conditions is eliminated, because only valve which require overhaul need to be removed from the line The time required to commission the plant after the shutdown is reduced Trevitest automatically produces a permanent graphical trace of the valve performance for record-keeping purposes.
    • JL.CIPINANG MUARA I NO.21.B RT.006 RW.003 Kota Adm. Jakarta Timur

    • Building 12-25,ABP.No.188,Western Road,South 4th Ring Ro Beijing

  • LIFTING EQUIPMENT INSPECTION
    ICO Asiapacific has experienced inspectors with loadtesting equipment available up to 100 tons to meet almost any lifting requirement. Our inspectors routinely inspect small baskets and racks, skid mounted units and containers, offshore and overhead cranes, or sling sets and shackles. ICO has also been a full member of LEEA (Lifting Equipment Engineers Association) since 2011. ICO is experienced with most Offshore lifting equipment criteria, including EN 12079, DNV 2.7, BS, and API specifications.
    • 1 Stop Success Building. Lt 2, Kota Adm. Jakarta Selatan