Besi Segi Delapan Ditempa (forged)
Forging is the process by which metal is heated and is shaped by plastic deformation by suitably applying compressive force. Usually the compressive force is in the form of hammer blows using a power hammer or a press.
Forging refines the grain structure and improves physical properties of the metal. With proper design, the grain flow can be oriented in the direction of principal stresses encountered in actual use. Grain flow is the direction of the pattern that the crystals take during plastic deformation. Physical properties (such as strength, ductility and toughness) are much better in a forging than in the base metal, which has, crystals randomly oriented.
Forgings yield parts that have high strength to weight ratio-thus are often used in the design of aircraft frame members.
A Forged metal can result in the followingIncrease length, decrease cross-section, called drawing out the metal. Decrease length, increase cross-section, called upsetting the metal. Change length, change cross-section, by squeezing in closed impression dies. This results in favorable grain flow for strong parts
Hor Rolled Hexagon Bar
MetodeOpen Die Forgings / Hand Forgings: Impression Die Forgings / Precision Forgings Press Forgings Upset Forgings
Data tidak tersedia
Member Name : Nusantara BAJA Prima
Address : Jl. Kemang Soka Raya Komplek Kemang Pratama 2 No. AA6
Phone : +62 21 8273 3136
Member Name : FICEP SpA
Address : Via Giacomo Matteotti, 25
Phone : +852 25446888
Member Name : JOTUN INDONESIA
Address : Kawasan Industri MM2100, Jalan Irian III Blok KK1
Phone : +62 21 89982657
Member Name : Halarag Baja Utama
Address : Jl. Raya Narogong Jl. Kp. Bakom No.KM 17, RT.2/RW.4, Limus Nunggal, Kec. Cileungsi, Bogor, Jawa Barat 16820
Phone : +62 21 8493 6600
Member Name : GEWINN GOLD HOTAMA
Address : Jl. Raya Rengasbandung Kp. Ceger RT 002/01
Phone : +62 21 89140679