NIPPON 8048 MIO is a two-pack epoxy polyamide coating pigmented with Micaceous Iron Oxide. It provides a high build barrier coating that gives excellent adhesion and surface wetting properties on appropriate primed steelwork. Its unique combination of anti-corrosion pigments and rust penetrants provides excellent corrosion resistance in virtually a...

NIPPON EA 9 FINISH HB is a two-pack amine-adduct cured epoxy specially developed to achieve long term corrossion protection for many type of surfaces i.e. aluminium, galvanising, steel and concrete. This feature combined with its wide range of resistance properties make NIPPON EA 9 FINISH HB a durable, high performance and economical coating for im...

NIPPON EA4 FINISH is is a two-pack amine-adduct cured epoxy finish for use on steel and cement surfaces where chemical, oil and abrasion resistant coating is required. It is recommended for non-immersion services. If it is to be applied over steel, it has to be used in combination with the appropriate primers as recommended below. If it is to be ap...

NIPPON 8048 is a two-pack epoxy polyamide coating, specifically designed for use on steel surfaces that cannot be abrasive blast cleaned. It provides a high build barrier coating that gives excellent adhesion and surface wetting properties on manually prepared, rusty steelwork. Its unique combination of anti-corrosion pigments and rust penetrants p...

HEMPADUR AvantGuard® wins NACE’s MP Corrosion Innovation of the Year The ability of AvantGuard® technology to significantly improve anti-corrosive protection in harsh environments has been recognised by NACE International, the world’s premier authority on corrosion solutions. The prestigious award is testament to our entire...

Description
A two-component polyamide adduct cured, high solids, high build epoxy paint. It forms a hard and tough coating, has good wetting properties and low temperature curing. Area of use
As a selfprimed, surface tolerant paint system or as an intermediate or finishing coat in heavy duty paint systems where low VOC and high film buil...

Protective & Marine Coating

NIPPON RED OXIDE PRIMER is an alkyd based primer used as an economical protective coating for iron and steel surfaces under non-immerison condition

NIPPON EA 9 FINISH HB is a two-pack amine-adduct cured epoxy specially developed to achieve long term corrossion protection for many type of surfaces i.e. aluminium, galvanising, steel and concrete. This feature combined with its wide range of resistance properties make NIPPON EA 9 FINISH HB a durable, high performance and economical coating for im...

NIPPON 8048 ZINC PHOSPHATE QD PRIMER is a high build epoxy coating capable of providing up to 250 microns dry film thickness per coat. It combines superior barrier properties with excellent wetting and adhesive characteristics. It can be applied over wire brushed rusty steel abrasive blasting is not possible.

Epoxy

-

For various metal packaging material e.g.: Deep Draw / Aerosol / General Line Cans, Pails, Crown and Aluminum Collapsible Tubes, Consist of : - White Coatings - Sizing - Interior & Exterior Lacquer - Varnishes - Side Stripping Varnished - White / Process Colour / Special Colour Metal Printing inks

For High Durability with anti corrosive properties    WilDan 800 - 400 / Exposy Mastic - High solid  WilDan 800 - 403 / Multypurpose Epoxy  WilDan 800 - 406 GL / Polyamide Epoxy Finish Gloss  WilDan 800 - 407 ZP / Zinc Phosphate Epoxy Primer  WilDan 900 - 500 / PU Fini...

PLASITE 4550 is a 100% solids, flake filled, premium novolac epoxy coating for internal tank lining. It is a two component system consisting of four parts by vol¬ume of Part A resin and one part by volume of part B hardener. It is applied using plural component spray equipment, from a total thickness of 20-60 mils (500-1500 microns) in a single...

Cat epoxy adalah cat khusus yang terdiri dari 2 (dua) komponen bahan yaitu cat epoxy/resin dan hardener.Kedua bahan tersebut diaduk merata dan dilapiskan di atas beton. Cat Epoxy tersebut setelah kering membentuk lapisan (film) tipis tapi keras, kedap air, tahan kimia dan berwarna, bahkan dalam kondisi tertentu berefek glossy/mengkilat.

For various articles, e.g.: Drums, LPG, Folding Gates / other Building Components, Autoparts, Metal Furnitures, and Household Appliances

EVAMAX 2000 and EVAMAX 2000 F are low VOC (volatile organic compounds)heavy duty coatings based upon a combination of epoxy resin, a special abrasive resistant  agent and polyamide curing agent. They possess an excellent range of characteristics :- strong adhesion, very good anticorrosive performance, and a high  degree of inherent toughn...

For a long time, tar epoxy resin coatings had been applied to deliver good protective performance andeconomical coating on steel structures in severe condition such as underwater facilities and pipe internal. However the recent market demands tar free type coatings due to some features of tar epoxy resin coatings such as carcinogenic risk, colour l...