Polyurethane

Description
A two-component, glossy acrylic polyurethane coating, cured with aliphatic isocyanate, with good gloss and colour retention. Area of use
As a finishing coat for protection of structural steel in severely corrosive atmospheric environment, where light-fastness and gloss retention are required.
Minimum temperature for curi...

Description
HEMPATHANE HS 55610 is a two-component polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zinc phosphate. Area of use
As a VOC-compliant, high-build finishing coat for protection of structural steel in corrosive environment. May be specified as a one coat "Direct To Metal" sy...

Description
HEMPATHANE TOPCOAT 55910 is a two-component polyurethane topcoat, cured with aliphatic isocyanate. Area of use
As a VOC-compliant, high-build finishing coat for protection of structural steel in corrosive environment, especially for maintenance purposes. May be specified as a one coat “Direct To Metal” system in mild atmo...

Description
HEMPATHANE ENAMEL 55100 is a two-component, high-gloss acrylic polyurethane enamel, cured with aliphatic isocyanate, with good gloss and colour retention. Area of use
As a glossy decorative finishing coat on a variety of substrates such as steel, aluminium, glassfibre, reinforced polyester, plywood, hardwood etc. in severely ...

Protective & Marine Coating

Description
HEMPATHANE HS 5561B is a two-component polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Area of use
As a VOC-compliant, finishing coat for protection of structural steel in corrosive environment.

NIPPON POLYURETHANE RECOATABLE FINISH is two-component, high build, glossy Aliphatic Acrylic polyurethane coating while incorporating an extensive range of performance characteristics. It provides a highly durable, gloss level and colour retention top coat finish.

Polyclad 777 is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after applicat...

Auto Urethane

Novalux Polyurethane Finish 7441 is an isocyanate/acylic resin coating designed for performance with exterior gloss and color retention. Its a chemical and abrasion resistance enamel.

A high performance, two component, high solids finish which contains no free isocyanates, offers compliance to current VOC legislation, and affords extended lifetime to first maintenance when utilised as part of a high performance anticorrosive system.Interfine 878 offers superior gloss and colour retention and provides significantly improved resis...

Polyclad 757 is a high performance pipe lining specially designed for the protection of steel, concrete and DIP pipeline interiors. Typical applications are pipeline interiors for raw water transmission, wastewater transmission and treatment (Municipal and Industrial. Polyclad 757 provides protection against microbiologically induced corrosion (MIC...

Polyclad ARO is a high performance pipe coating specially designed for the protection of FBE coated pipeline from gouge and mechanical damage during directional drilling or slip bore installations. Polyclad ARO is applied directly over FBE as an abrasion resistant overlay (ARO) and provides superior protection in rocky, rough and mountainous enviro...

Solvent-free Aromatic Polyurethane, ASTM Type V Polyclad 767 is a high performance pipe coating specially designed for the protection of pipeline interiors. Typical applications are pipeline interiors for water transmission, wastewater treatment (Municipal and Industrial), and interior tank linings.